









🦷 Secure your smile, all day and every day!
Cushion Grip Thermoplastic Denture Adhesive delivers a waterproof, zinc-free, and long-lasting hold that refits and tightens loose dentures for up to 4 days. Its unique soft reliner formula cushions gums, prevents irritation, and creates a custom-fit suction seal, ensuring comfort and confidence without daily mess or reapplication. Trusted since 1950, it’s compatible with plastic, porcelain, and acrylic dentures, making it the go-to solution for professional denture wearers seeking reliable, all-day stability.










| ASIN | B07M8LMMV6 |
| Best Sellers Rank | #2,325 in Health & Household ( See Top 100 in Health & Household ) #4 in Denture Adhesives |
| Brand | Cushion Grip |
| Color | Orange |
| Date First Available | December 19, 2018 |
| Full Cure Time | 6 Hours |
| Is Discontinued By Manufacturer | No |
| Item Form | Pliable Thermoplastic |
| Item Package Quantity | 1 |
| Item Volume | 1 Fluid Ounces |
| Item Weight | 1 ounces |
| Item model number | SG_B07M8LMMV6_US |
| Manufacturer | USpharma Ltd |
| Material | Aluminum Lake, Ethyl Alcohol, Glycerol Triacetate, Methyl Salicylate |
| Number of Pieces | 1 |
| Package Dimensions | 5.2 x 1.46 x 1.22 inches |
| Package Information | Tube |
| Special Feature | Comfortable Cushioning, Long-Lasting Hold, Non Toxic, Strong Suction Seal, Waterproof |
| Specific Uses For Product | Denture |
| Tensile Strength | 10 Pounds Per Inch |
| UPC | 860000361507 |
| Unit Count | 1 Ounce |
| Viscosity | Low to medium |
| Viscosity Level | Low to Medium |
| Water Resistance Level | Waterproof |
B**Y
Yes 100,000,000 times over
This is an awesome product. I looked all over trying to find something to work with my dentures. Reliners get expensive when you go to the dentist. I youtubed to see how to use the product. It is really easy. I will say, when you are putting in fresh product, make sure you sit the dentures in hot water to help soften the adhesive. This product is a one and done for me. I will wait usually a month before I strip it out and put in new. I always put the dentures in hot water in the morning for a few minuets before placing them in my mouth. It helps the adhesive ahear back to your gumbs. Nothing gets under the plates. the color is natural. You might have to remove the excessive the first time putting it on them. I always do. There is a slight taste when first putting the adhesive on the plates, but it quickly goes away.
V**S
It actuallyworks!
i’ll admit, I was surprised that it’s a good product. When I got my new dentures, the dentist would not put in a cushion filler to make it more comfortable since I had to wear it for six months before they put one in like I had I had on my temporary denture, which was great because it had a good seal and was comfortable. I wanted a filler I could take out when I have to go back to get my dentures adjusted as these are brand new and definitely need adjusting. The reason is I had a filler in place, it would cancel my warranty, which I think is stupid. But the biggest issue was comfort. Hard plastic sucks. I couldn’t afford Aspen Dental so I got what my insurance would cover. Honestly, if I could afford to go somewhere else and get the better dentures I would but I’m stuck with this for at least a year. So I needed a comfortable cushion. I got this to see what it would do. I’ve watched the Dental assistant do it with their brand that they wanted to charge me $200 to put in, by the way, so I had a good idea. Let's try this! Honestly, it’s really pretty easy and when I put the denture in after doing the process, it was a kind of warm and tingled feeling for a bit, but after about two minutes, it stopped and made this hard plastic denture comfortable and secure! So if you’re really in need for some comfort in your denture!
A**N
I was hopeful
I bought this in hopes that it really would make a difference. It seemed really positive with the reviews and videos. But there are no miracles when it comes to finding something that’ll help dentures feel and fit better. Something that’ll make it easier to eat, especially if you go out in public. First, I have a high arch therefore I have no suction with my upper dentures. I have to use adhesives or they fall out, a thin layer is all I need though and it lasts all day. No one has suction with their bottom ones, it’s impossible because we use the bottom jaw muscle so much. Even with adhesive it’ll breakdown throughout the day because of the excess saliva that we produce now. Very important downfalls to remember once you become cursed with false teeth! Okay onward to the review! I followed the instructions and there is a distinct chemical smell and burning sensation once you put the denture in your mouth with the product on it, it’s not a “tingling” it BURNS and it brought tears to my eyes. My mouth is completely healed too, it took about 5 minutes before it slowly faded to tolerable. After 2 hours you can sip liquids but not hot. You can also remove the dentures at this point to trim any excess adhesive that is hanging out/over. Immediately put them back in your mouth for the remaining time, remember it says approximately 4-6 hours to cure. It’s recommended you sleep with them in to allow them to cure. You can always add more product if needed and that’s where it gets tricky. Time and patience is a virtue here! You also have to wait 24 hours before you can add adhesive or clean them. I’m glad I have another pair to wear because like I said previously I need adhesive and I can tell already these are not going to stay in place once I speak. I do not feel a suction or a tighter fit. My bottom denture is still loose even with two layers of product. It actually feels like I’m developing a sore on my right side. I don’t know if the chemicals created a burn or if there is a sore from the product rubbing. It is extremely difficult getting this material off of your dentures, I struggled for about an hour to get the layer off, I tried ice water and boiling water too. Don’t make plans on going anywhere if you need to change this liner out because it takes time and it’s frustrating! The brand ambassadors that praise this product must get paid well and have great fitting dentures to begin with because I just don’t see this product doing what they claim. My top dentures still fell right out and the bottom weren’t any tighter even with two layers of cushion grip. Wearing a regular adhesive works better in my opinion! I’m glad I can return this product and get my money back.
T**Y
Make sure dentures fit better!
This works good. It’s all I use except for the fact it’s hard to clean off when you have to exchange it out.
B**S
Trés bon produit. Facile à utiliser et surtout tiens beaucoup plus longtemps que Database. Je le conseille vivement
N**S
Such a relief. I had no issues with my bottom partial denture then the dentist fiddled with them when I mentioned me having a lisp. Pain city after that. I went back once and a different dentist filed then and it helped for a few days then pain. I cbf to go back so I tried this product and it works amazingly. Highly recommend!!
A**I
Bardzo dobry
F**O
Ottimo prodotto io mi trovo bene l'importante è seguire le istruzioni
G**A
Compre Cushion Grip para mi padre y le ha parecido excelente. A diferencia de otros adhesivos para prótesis dentales, este crea una capa firme y acolchada que mantiene la dentadura en su sitio durante todo el día sin necesidad de reaplicar. Lo mejor es que dura varios días con una sola aplicación, lo que lo hace práctico y económico. Además, no tiene sabor desagradable y se limpia fácilmente al renovarlo. La sensación es mucho más cómoda que con cremas tradicionales, ya que reduce la fricción y las molestias. Para el ha sido un gran descubrimiento y lo recomienda totalmente a quienes usan prótesis dentales.
Trustpilot
1 month ago
3 days ago