SUPERPLUS PCI- E 3.0 16X Graphics Card Vertical Kickstand/Base Magnetic Standoff DIY ATX case Computer Graphics Card Holder(Black with Extension Cord)

I recently got an EVGA FTW3 RTX 3080 GPU, but imagine my surprise when I realized how massive this card is - it’s a 3-slot GPU. I have a Mini ITX motherboard, and the Phanteks Evolv ITX case, which means it only has 2 PCI slots on the back. Therefore, this card was NOT fitting in this case as any other card would. So, it was either buy a whole new case and the parts necessary, and maybe a vertical GPU mount (since I’d have the space then to do so), or… try this thing out. As the photos show, it’s an ultra tight fit in the case, but it’s not shoved up against the window, so it can breathe - I had to relocate a few things, namely the CPU radiator and fan, but things work fine and the system doesn’t heat up to danger levels. One slight drawback is that because it’s such a tight fit, I’ll need to Dremel out a vertical slot in the back to allow my 3 other monitor cables to connect - currently the existing PCI slot would only allow one cable in to be plugged in, but it’s butt-end still sticks partially outside the case. Thus, no room for other cables to connect. Aside from that, for about $45, I am pretty happy with the whole product and experiment!

Mine is not usable. Doesn't fit my Radeon 5700x, and the PCI extension was faulty, which meant I had to do a bunch of troubleshooting to figure it out. After reseating and testing all RAM in each slot, reseating and inspecting CPU, reseating my ssd, amd a bunch of other stuff, I finally figured it out. To make matters worse, the cheap screw cap broke off and got stuck in my driver.

To me, not a bad idea really, Everything works, however, in my situation there was not really enough room at the bottom of my case to let this sit. The cabling worked but it was pretty stiff although not inflexible, just hard to work with. I ended up having it all installed hanging halfway out of the case. The mount worked ok, just maybe consider getting either a shorter/longer or more flexible extension to go with. It really is a good idea as my card was too big for the board I had and covered up the SATA ports.

This was a great piece, or so I thought. It was easy to put together and install inside a small case, such as my MATx one. It was built semi well and relatively sturdy. I loved the way my GPU looked mounted sideways as well. What I didn’t know, though, was that the magnets on the bottom are extremely powerful for their size. I had trouble getting in it and out and it left scratches all over the bottom part of my case interior. This made me mad, and could have been said or prevented with a warning to put something down. Am not very pleased, but cannot completely get mad on a decent product.

Works well with a GTX 1080 FTW in the phanteks p300 case. Only problem was having enough clearance due to my hyper 212 black edition but just barely got it to fit. Also the mount has magnets to attach to the psu shroud, so make sure your case shroud is metal. When installing it in this case, you're gonna have to mod the pcie brackets but I got around that by pressing the GPU gainst the glass and running the display port through the slot. I was pleasantly surprised how good this was considering coolermaster and phanteks sell there's for almost double the price.

Product is very good quality and was able to hold my GTX 1080 with no issues. Onmy issue I had is the power supply shroud on my CoolerMaster H500 is plastic. The magnets are really strong and would have held it perfectly. The cord is stiff but worked perfectly and after running some benchmarks did not seem to affect performance.

Very cheap screws. Weak magnets. GPU would fall over anytime I let go. I will be returning this. Waste of time and money. Go with better quality products. Also didn’t come with all the hardware it’s supposed to. Missing 2 screws

The mounting arms and location for pci Xpress port did not line up for my 2070s. Looks okay in the case but was a pain to install because of the miss aligned mounting holes.