White T5 37 74 LED Bulb with Twist Lock Socket PC74 PC37 Dashboard Instrument Panel Gauge Cluster Light Pack of 10

Great price, includes the sockets too! I used 5 bulbs on my TJ's instrument cluster and 2 bulbs on my AC panel. Still have 3 left as spares. They really improve the lighting. The only problem is the dimming is almost unnoticeable now.

Perfect for a 2001 f150 XL 4.2 dash cluster. Sockets fit the illumination and indicator holes. Entire cluster can be changed to t5.

Installed on my 1998 Jeep Wrangler that had a couple of OEM bulbs already burned out. Nice pure white color, and nice and bright to make the gauges easily readable in daylight. Colored sections of the gauges themselves remain true. Easy to install, except had to remove the dash a second time to correct a couple that were installed backwards. Too bad there's no way to determine polarity ahead of time. The only thing I don't like, but not a huge deal, is that they only dim a minimal amount. They tend to be a bit too bright on a dark road at night. I've heard a special dimmer intended for LEDs can solve this, but it's not a big enough drawback for me to go to the trouble of trying to change the factory dimmer switch.

These are so much brighter than my OEM bulbs. LED lights fit into a base that matches your application. I bought another brand from Amazon that did not fit into their base. I tried everything. These worked perfectly in my instrument cluster.

Great LED lights. They are really bright and of good quality.

Looks sick on my 99 mustang everything fit great and the lights are bright also pretty easy to install and you can use your old light sockets for it if you choose

Yes, I flipped the bulbs to double check polarity, 3 failed when other bulbs worked just fine. 3 stars only because of a 7.54 deal, the ones that did work are bright and they ARE adjustable with the rheostat control. That said, these were advertised for a 2004 Sequoia. I understand such designations are though Amazon's vehicle selection process, so it is not so much that these fit but can be 'made' to fit where it's close enough to fit though a couple have to be turned just so, unlike OEM that have full fit. Let's just say they are a little awkward. I didn't want to be one of those unfortunates that didn't check function before putting the instrument panel (IP) back, only to discover half of them don't work. So here is what I did. My vehicle has three connectors behind the IP that most people disconnect in order to install the bulbs. I noticed that the main wire bundle with those three tails was secured further back in the dash cavity. Using a fastener removal tool, I popped the plastic retainer of the main bundle which allowed me to pull the IP put further leaving the three connectors connected. This say, I would install a bulb and see right away if it worked. What I did was make sure to be mindful of what side of the bulb (with a number stamped on it) and the twist lock socket (lettering on the back) for reference. I notices that direction the lettering of all the other sockets in the dash were facing (upside down) so made sure the new ones did too. Then I guessed and used the side of the bulb with the number stamped in it (the other side was alpha-numeric) and slid the bulb in. 50/50 odds. Some LED bulbs take a little effort to wedge in the socket, even the ones they came with and even having used I used a small dab of dialectic bulb grease. Luckily, the LED lit the first time up, so no guessing game from there on out. I had three LEDs that would not light. Yes, I flipped them just to be sure that the bulbs didn't have random polarity gates, and tested by inserting known good bulbs in the IP sockets. A 70% rate of proper function is very impressive. However, the ones that did work were both VERY bright (too bright for my wife) AND dimmable, at least in my vehicle. The problem with dimming the I bP lights is that the remaining Incandescent bulbs in the radio/HVAC panel dim too much. I hadn't considered that. Now I will have to find more LEDs for so all of the panel lights can be dimmed evenly across the board.

Snug fit but that's what you want. Work great, nice and bright.

Satisfait

Installed the LED's into there holders and 2 of the 3 installed have shorted there connections out, and damaged my car dashboard cluster. Unbelievable who is going to pay for my dash now? Is this why they don't come pre-installed into there holders? The lights forced the pins in the holders to touch causing my silicon board to melt one that connection. Photos for evidence of the holders, currently trying to fix my hard to find cluster. Thanks

I liked the web site converted my Canadian money in black and white. Upfront. No guessing

I ordered these lights because the marketing indicated they would fit my 2007 F150.... They do not, the socket is not the correct design for my model, the metal sensors do not fit nor connect to the upper and lower side of the dash, hense not connection. The genuine sockets are designed with upper and lower sensors to connect to the dash.

Got this to replace my son civic. this light is very bright, much better then the original. I try to find a fewer pcs. package but no luck I have to op. with 10pcs min. It end up paying more then the original. But I do like this more for the brightness.