FrSky Yaapu Telemetry Converter Cable Pixhawk to Taranis X9D Plus QX7 Jumper T16 Smart Port R9 Slim+ R9 X8R XSR R9M X4R Receiver

I just set this up on a plane with an F35 or Wing 10dof flight controller and an R-XSR. It seems to be doing everything that it's supposed to, but I hit some snags setting it up. First, I found that it only works when the RX is flashed with SPort firmware. It wouldn't work with FPort. Next I had to set the serial protocol to 4 in Mission Planner. Then go to the telemetry set up in the TX radio and discover sensors. Once the sensors are detected, go back into Mission Planner and set the Serial Protocol to 10. That will allow the data to flow though to the Yaapu script. I hope that helps somebody!

Works really well. Using it with a Matek H743-wing with ardupilot. Funny thing is, you don't need the red or black wires. Only the TX and Rx on the Uart and the one S.port wire. I removed the red and both black wires.

This cable is a must-have for Pixhawk and FrSky integration, enabling seamless telemetry display on OpenTX radios via the Yaapu Lua script. In my aerial tests, the data was transmitted reliably up to 1 km, with no signal loss or latency in reporting critical parameters like GPS, battery, and altitude. Critically, however, the cable is rigid and difficult to route in tight UAV airframes, leading to awkward bends or poor space optimization. A silicone-sleeved version would elevate the product to professional-grade standards. Still, functionally flawless and highly recommended for any FPV or fixed-wing pilots needing reliable telemetry feedback.

Well made with silicone wiring and a few different setups included. With a Pixhawk, it's plug and play! Pop one end into the Sport on an FRsky RX and the other end into Telemetry 2 of the Pixhawk. Change Serial 2 protocol from 1 to ten to enable pass through and you are in business. The install Yaapu's excellent LUA scripts and you are in business

had to modify and resolve 2 of the connections. then it started working for my rsxr reciever

use with a FrSky X8R recever, the Pixhawk and Jumper Pro 16 I can get gps maps and Telemetry on my Jumper Pro 16, It is a vital tool for me. I have three

This worked just perfect with my pixhawk and Taranis. Its small well put together. Has extra cables if needed. If I need another this is where I'll come.

Works only with fr sky x8r reciever

Excellent product. The default cable is perfect for the SpeedyBee F405 Wing Mini telemetry connector. Using Frsky X8R receiver connected to Sbus and in ArduPlane I configured Serial 4 to Frsky OpenTx telemetry passthrough (10) and Yaapu lua script on my Taranis QX7. For second screen I set up to display Nums - GPS from Telemetry. I will buy more of this for the rest of my Smartport enabled Frsky receivers.

Tutto perfetto, come da descrizione spedizione velocissima .Grazie LUCA

Il n’y a pas le connecteur dupont comme sur la photo

I followed the ardupilot documentation, youtube video, and the wiki for how to hook this up to my frsky receiver and Pixracer flight controller. I also followed the youtube video from Painless360 to install the scripts on my Radiomaster TX16s. The cable worked perfectly in this application and I now have telemetry on the main display of my transmitter.

Endlich eine gute Telemetrie Verbindung zwischen Taranis und Copter die macht was sie soll. Der Preis war günstig.