Celestron 93625 Universal 1.25-inch Camera T-Adapter, Single

For my Powerseeker 70az was looking for a TAdoper and T-Ring to go with my Canon EOS D-600. Enquirers with camera accessory dealers turned out to be non-productive. Decided to try this. and it works like magic. You would need a TRing to go with this. I would say a must have accessory if you are a nightwatcher and own a DSLR

This is a quality product from Celestron - goes about doing its job perfectly, i.e., sits nice and square between your telescope and your camera. All metal and along with T-ring, this is the one that keeps your camera hanging on to the telescope. The package from Amazon was good - although the bubble-wrap further wrapped in celo-tape cocooned the product very well from any kind of bashing during the shipping, it's slightly messy to unwrap (need multiple cuts using sharp knife - on the bubble-wrap of course).

Still using it since 6years

It is as good as you expect from Celestron.

Nice attachment.

Very poor quality and performance

Good product, works as required

This product is unnecessary and it's unfortunate that it's being sold by the name of Celestron. All you need is a t-ring which allows the camera threads to sit on the Celestron scope. Don't buy this. No issues with the seller as they are usually unaware of this.

I received the Celestron 93625 Universal 1.25-inch Camera T-Adapter on time as promised. The adapter met or exceeded the advertised specifications and was well constructed. It performed great on my Dynamax 8 as expected. I would recommend it for use when the camera is mounted into the telescope eyepiece holder. Your eyepiece holder must be sturdy enough to hold a SLR or DSLR camera body. I did not have any problems with focusing on my Dynamax 8. Balancing my camera/telescope combination took a little work since I was using a 90 degree erecting eyepiece holder on my telescope. A straight through eyepiece holder may be better. If your telescope permits removal of the eyepiece holder then you may wish to get the Celestron T-Mount or the Opteka T-Mount Adapter to fit your particular SLR or DSLR camera. I later used the T-Mount Adapter to attach my camera directly to my telescope and eliminating the telescope's removable eyepiece holder. I did NOT have any focusing problems with the camera T-Adapter or the camera T-Mount adapter with my Dynamax 8 telescope. The adapters are designed to be used with the camera lens removed. The Celestron camera adapter permits the insertion of a 1.25 diameter plain barrel eyepiece into the adapter to increase the magnifying power but this reduces the light greatly due to the added lenses of the eyepiece and from the eyepiece projected image onto the film or camera sensor chip. The reduced light will require longer exposures and therefore require manual tracking or a telescope tracking device (clock drive). When using an inserted eyepiece into the camera T-Adapter, care must be taken to make sure that longer barrel eyepieces do not obstruct the camera's mirror flip-up action.

The T-adapter worked perfectly with the T-ring for the Canon Rebel Xsi and the focuser of my astromaster 130eq.

Buen producto. Ajustó perfecto con mi cámara canon y puedo tomar fotografías de buena calidad.

Celestron NexStar 5SE teleskopumuzda Canon EOS 650D fotoğraf makinemiz ile gök cisimlerinin fotoğraflarını çekmek için bu parçayı satın aldım. (Ayrıca aynı fotoğraf makinesi ile uyumlu Celestron Canon T-Halkası'nı da satın almıştım) Teleskopumuza da uyumlu fotoğraf makinemize de uyumlu. Gündüz teslim edildiği için gelir gelmez denemek amacıyla teleskopu şehire doğru çevirdim ve bir kaç kare fotoğraf çektim. Gayet güzel sonuçlar aldım. Sanırım gece Ay ve diğer gök cisimlerinde de güzel fotoğraflar çekeceğiz.

Allowed me to connect my SLR to my telescope :)