OMT Bearing Puller Set, Bearing Splitter Tool Kit

Excellent bearing puller. Use this kit all the time. Not sure on the long term durability but has paid for itself already.

Well made and worked great. I had an almost impossible bearing to pull with almost no clearance behind the bearing. It pulled it with ease.

Great tool. Used to split transmission shafts in a side by sides and various motorcycles. Good quality.

First thing you need to do is take off the supplied nuts and get some Grade 8 ones. My first bearing pull I thought i broke the tool! It was the threads of the nuts that tore, making the nut go sideways. That made it look like the shaft bent. I got some Grade 8 nuts and hardened washers and pullled the pulley right off. The jaws are thicker than my last set so you must have a larger gap between the bearing and the sheave to allow the tool to fit. Also make sure you coat the threads of all the pins witn anti-seeze. It will help with a smooth operation. The threads on two of the flat end pins had rough threads and it seemed like they were bad until I anti-seezed and wrenched them through once. The case does not hold all the parts in place, so plan on picking them up every time you open the case! No matter what side you open from, something falls out. It is not a huge issue, but that is why I took away a star. Other than that I got the job done. End of day happy.

Me encanta y Ami esposo también

Ok

This tool was a struggle to use properly when removing a pressed bearing from a Ford 8.8 pinion gear shaft. Firstly, the pullers are a lot thicker than they look in the pictures, and did not fit under the bearing at all. The only option was to cut the race and rollers off and pull on the upper lip of the bearing race. Again, the tool was fidgety to set up for this pull and it broke the lip off in several places - BUT the race did start to budge enough that I could get the tool UNDER then entire bearing race and finally pull it off. It required an impact gun to turn the screw, though! I only needed it for this one job, and it was the least user-friendly of the tools I bought to rebuild my differential. However, it did work in the end, and I hope it works again in the future.

Worked for me without incident. Using it to pull bearings for tool motor repair. Complete instructions for those have not used the tool in combination before would be nice though.

great for diy

Defective kit containing two different parts that appear to belong to different products or versions. The kit came with two pieces that should be exactly the same, as shown in the photos. To use them as intended, I would need to make several modifications and take one of the parts to a metalworking shop to have its length corrected. This is unacceptable for a new product and suggests a complete lack of quality control.

Pour le prix ça va

Muy. Bien

Excellent quality, nice purchase