DC Sport Black Universal Bolt On Exhaust Tip 2.875" Inlet 3.75" Outlet - Fits 1.75" - 2.5" Tail Pipes

Great product love the finished look

This tip looks great and installs easy(10mm). Make sure you tighten the bolts down tight, because its a heavy tip. Fits my 2.5 inch exhaust fine. As for sound I don't know about stock exhaust, but I have a 3" flow tech afterburner muffler that's reduced to a 2.5" outlet and it definitely made a difference in sound. Lower, smoother growl when shifting gears. It does sound the best at higher RPM's in my truck (2008 Dodge Ram 1500 4x4 4.7L 6-speed manual). Highly recommended! Don't be fooled by the picture its flat black not high gloss. (plastic wrap)

Love the look, bolts on perfectly to my 2016 Tacoma. Pretty sturdy if you crank those bolts down. The bolts themselves rust instantly, so paint them with high heat paint before you install them and maybe once again after (I just hit my whole exhaust pipe and the tip itself so I can keep doing that over time). Someone stole my first one, and I bought a second one and bent two of the inside tabs so they can be backed out even if you remove the bolts, then I added the third clamp and torqued in down hard. No one can steal it now!

Very nice looking Exhaust tip, just hope that it won't rust, it seems like it's a mini resonator, I installed on my 1999 Gmc Suburban about 6 months ago the catalytic converter failed after checking with a few dealers and exhaust shops, I decided to install dual exhaust which was only a few $$$ more than replacing with factory exhaust, but the tips were very pricey I'm glad I waited and installed these EX-1011B from DC Sports, in a few months I'll give another review how they wear, they had good reviews but will add my own honest review at a later date. A few more months went by, it's still looks great NO RUST, great product for the price, I would definitely recommend these. UPDATE Sept 01/ 2016 A year now went by, this exhaust tips looks just like the day that I installed them NO RUST except for the screws that hold them on, by looking at the screws I think If I would attempt to remove them they would snap off I highly recommend these tips, plus they are very good looking on my good looking GMC Suburban.

I like it overall. Had it on my 16 silverado about a month. I was washing it a couple days ago with harden hose and a chip of black came off this tip. I plan to remove rest of black finish and powder coat with good prep process. Disappointing but overall okay for a $20 tip I suppose. Appears to actually be stainless at less under the black finish. While I’m at it I’m going to remove the branding tag, hate that everyone needs a plug on every part. Exhaust tips don’t need to wear a brand badge! UPDATE after 1 year. All of the finish has chipped off. Low grade stainless is beginning to rust slightly. Bolts have rusted and thus broke trying to remove. It will now be a welded tip after I re-finish. Mostly junk, replace the bolts with stainless bolts and refinish are both required upon delivery.

I wanted something to match my sweet blacked out 2007 Honda Element. The bare pipe wasn't working and the chrome tip I had was trashed when I replaced the exhaust system. I got this for under $9 "used" and thought at that price I couldn't lose. It arrived in perfect shape looking like it had never been touched. I was unprepared as to how long it is but that's my fault for not double checking. It fit my tailpipe just barely since on my Element the pipe takes a sharp left as it makes room for the suspension. This causes the tip to sit not quite straight but it looks fine to me. The bolts/connectors hold the pipe in place just fine although on reinstalling after my reconditioning (read on) I think I may have stripped one. The only reservation I had was about the reviews regarding the paint bubbling after a few days. Mine took a couple weeks to do this, mostly on the inside lip. I decided to repaint using high heat flat black from Rust-O-leum. I first removed the bad finish and used fine steel wool to rough up the surface. I put a few coats of paint on and then baked the finish in the oven as recommended on the can. It was a rather smelly ordeal but I'm hoping it will help the finish withstand winter driving. So, I spent about $15 for a $9 exhaust tip and several hours painting and curing. It looks good but we'll see if it holds up.

It too concerned if the coating peels off as you can always shoot it with some heat resistant black in the future, but fits great on my 2.5” OD factory exhaust on my 2003 4.7L V8 4Runner, maybe caused a slight change in tone, but most importantly of this part, it looks great!

Exactly what I was looking for, sounds great, easy installation. Took away that dreaded drone, what I was trying to accomplish. Thank you DC!

excellent quality , worth the money

Excellent quality and look great

I got this as a little touch onto my 2011 ford ranger. In all honesty, it adds a little pop to the truck. If you are looking for a MASSIVE change in sound this isn't for you. I have got lots of compliments around it though! It adds a little purr to the sound while revving up. I drive a manual so that definitely helps the sound but overall i would recommend to someone trying to add a little spice to their vehicle.

Excelente producto quedó perfecto sólo hay que apretarlo muy bien para evitar que se caiga

كا شكل عجبتني مع بروزها في مؤخرة السيارة تعطي شكل قوة للسيارة (شكل بس) ، ما تغير الصوت اذا انت بتاخذها للصوت ما يصير شىء للصوت ، تركيبها سهل جدا تحتاج(شاكوش - مطرقه) مو حديد ، بتحصله عند المحلات او تطلبه ( مطاط مقوى )اذا صح التعبير علشان تطلع قطعت الوكاله وبتحصل مقاطع فيديو طريقة الفك و التركيب سهل تقدر تخليها بارزه او بدون بروز شىء راجع لك ومفك عشرة (10) علشان تربط و تثبتها بأحكام. وقبل لا تبدأ في الفك خذلك نظرة بتمعن وبعدها توكل على الله و جدد . اطلب حبتين(٢) لان الطلب على حبه وحده انتبه لهذا الشيء.