Happy-motorBlack Electra Keystone Auxiliary Led Run Brake Turn Lamps Lights For Harley Ultra Limited Flhtk Rear Fender Light Keystone Saddlebag Side Light Fltru 14-20

These are the same brand Harley sells for three times the amount, They do not come with instructions, nor the two sided tape, but for the difference in price i can watch a video, and buy some two sided tape, Once i got it figured out, it was so simple, took all but maybe a half hour to install these, maybe 45 minutes including clean up time, They look great, and are very bright. I also changed my tail light/brake light while i was at it, put the eagle light pulsing one on, it is awesome. Definitely five stars on this item, but if you cant learn on a you tube video and buy some two sided tape, go to Harley and buy it at three times the price, plus labor.

I installed these on my 2016 Ultra Limited in under a half an hour. They are plug and play just make sure you test them before you put them in position so you know which is left and right. they look great and add to your visibility on the road.

These are a pretty easy install. Attaches with 2 bolts at the saddle bag. Pretty easy..Operates as should.. \=Run lights are seem to be kinda dim during the DAY to me but I'm not sure if this particular set or of all of them are the same way. Not a big deal for me because they are nice and bright at night when it counts!!Signal and brake lights are great in day and at nightONLY drawback killer for me was the set I got would NOT work with the Custom Dynamic strobe module. Even after 30 min on phone with CD they would not work. CD module strobed just fine when tested alone, but not when fed through these lights. Maybe just the set I got so I'm not sure if its 100% all of them from this company.I used another CD module for my tour pack so I still have some light strobing during braking.These are nice EXCEPT for them not working with the CD strobe unit................

So these were working great for 29 days until I washed my bike. I took a lot of care to not hose down the lights or connections...but after I was done the left light is bright all the time and doesn't flash at all.I went ahead and got these because they were the cheapest with an at least 4 star rating. It took about and hour to install, and simple enough that I didn't need instructions.They are a tight fit. If you clean off the sharp flash edge they will go in a lot easier. They did have the tape to stick the top in place, but remember to clean off the area where they're going to stick to.I hooked them up to make sure they would work prior to bolting in place since the left and right harness are not labeled.My thoughts. they look cheap. The running lights are really dim as mentioned in many reviews. The turns and brake LEDs are very bright and look similar to the stock LEDs. The turns do not flash in the same cadence as the stock lights which is a bummer, but I don't know if the more expensive lights would either.

I swear this is the exact same LED light the Harley Davidson dealership sells for three times the price. The only difference I see is this kit does not come in a fancy Harley Davidson package and does not include instructions. Don't need the fancy H.D. packaging, that just ends up in the recycle bin. Don't need instructions either. I cannot believe people are downgrading the product because of no instructions. What are they, stupid? It's a complete plug and play kit. If you don't know anything about basic wiring, then you shouldn't be working on anything. The kit looks great and works great on my 2020 Ultra Limited. Now, if you are electrically challenged, you can always ask me how to install these lights. Or, you can take it to the Harley Davidson dealership and ask their shop to install them for you. After spending close to $200 for dealership installation, you'll be wishing you contacted me first.

These lights are a great value and half the price of similar lights. I installed these on a 2021 Harley Ultra Limited. First, a few installation tips; use gorilla double faced tape to adhere the top half of each light. Make sure to clean the mating surfaces with alcohol. Also, use a little dialectic grease and tape or heat shrink your connections for insurance against moisture. The bottom portion of the lights are secured with stock hardware and are enough to securely hold the lights, but without double sided tape they will move slightly forward. The two sided tape is not absolutely required, or included, but it ensures the lights are held flush on the bike. I initially had one light that had inside condensation after washing my bike, The light functioned properly, but obviously this was not good. Amazon quickly sent me a new set and the lights have been trouble free. They look and function better than the Harley Davidson version for a fraction of the price. They don't include instructions or double sided tape, so aside from that annoyance, they're great. I gave them five stars because of the quality for the price, along with a great warranty response.

Nice working lights. Plug and play - kind of. The pigtail connection on the back of the lights are larger than the hole in the backing plate. I had to use a file and make the backing plate hole larger. One of the harness connectors does not have a locking tab. Did not come with double sided tape for the upper tab on the backing plate. Also does not come with installation instructions.

Love these lights, they worked beautifully for my 2014 Ultra Limited. Huge shout out to the seller though, I had a minor issue with one of my filler lights (several months after my purchase), I reached out to the seller and had a replacement within a couple of days. I’ve bought several items from Happy-MT, and will continue to buy from them!