Sharpening Stone Whetstone #1000 Medium, Resin bonded alumina whetstone, Strong grinding power, Splash and go, Cuts fast, Low Wear, Not clog, Whetstone knife sharpener

One of my hobbies is sharpening knives so I have many sharpening stones. I have diamond stones from 220 to 1200 grit. After that I like to use ceramic stones. I have another brand that I typically buy because I trust the grits are consistent. I have ceramic stones from orange 1,000 to pink 5,000 that’s why I decided to try the 6,000 grit Kintif stone. I have to say I’m pleasantly surprised. I’ve only sharpened a couple knives so far but it has good feedback as you’re sharpening. It gets harder and harder to feel for the burr as you get higher in grit. While using this stone you can feel that you’re keeping the same angle and you’re forming an apex. These types of ceramic splash and go stones are way better than the cheap aluminum oxide stones. These ceramic stones aren’t too soft where a ton of the stone is removed when sharpening. The hardness of the ceramic stones are important. You don’t want a soft stone because you lose feedback and the stone will lose all durability. That’s why some stones will get uneven after minimal usage. Sharpening by hand is a skill, it gets easier with practice. If you have me Tiger Woods clubs I wouldn't be on the PGA tour. However having the right tools puts you in a position to succeed. I would like to try more of these stones and see if the grits are consistent but after using this stone I can say they appear to be a nice quality product. The price point of this stone is right around the lower end for this grit. This makes this stone a great value. For super fine grit stones that aren’t contaminated you could pay over $100. For most beginner sharpeners you should become an expert with diamond stones up to 1500 grit before starting to use ceramic stones. Once you have the skills to try the higher grit ceramics a stone like this would be a good choice. To test out the stone I took photos of a knife going from 1,000grit to 6,000 grit. If I used typical grit progression I should have gone from 1,000 to 3,000 to 6,000. Even though I skipped the 3,000grit the stone still worked evenly and worked better than expected.

This is a great whetstone. I’ve been using it regularly, and it has quickly become my favorite sharpening tool. It’s big enough to comfortably handle any size knife I own, from small folders to larger kitchen blades. The stone is very smooth and uniform — it sharpens quickly without gouging or leaving uneven edges. It wears very well with minimal dishing, so it should last a long time with proper care. I love that it’s a “splash and go” stone — just add a little water and you’re ready to go in seconds. No long soaking required, which saves a lot of time. It's simple to use and made of superior material. It gets knives super sharp in a short amount of time. The cutting speed is excellent while still giving a clean, polished edge. Cleanup is easy too, with very little clogging compared to other stones I’ve used. If you’re looking for a reliable, high-performing whetstone that delivers fast results and holds up well, this one is an outstanding choice. It’s a noticeable upgrade from cheaper or lower-quality options.

This stone is impressive. Its the first "new" splash and use stone in my collection and I will never go back to traditional stones that require 30m to soak in water prior to use. The stones require a small splash of water and your off to sharpening immediately and they do a GREAT job. My knives havent been this harp in a long time.

I ordered the #400 since im already in possession of a couple #1000 stones. Not only is this not a #400 but it looks very well used and stained with what looks like oil since it has permeated the surface. There wasn't a foam cradle either. The stone is still good quality and the rubber sleds keep it stable on smooth surfaces. Overall disappointing.

They offer this stone in several grit sizes. This one is "medium", which for me, is perfect. I have many knives and I like to keep them razor sharp. While a finer grit can allow you to get the sharpest possible edge, I have been able to get an edge that will shave... and that is usually all I need. I like that it is a wet and dry stone. There are times that I just need a quick tuning of the blade and don't want to take the time for a slow, wet sharpening. This stone seems to be well-suited for that. It can also be used wet with just a sprinkling of water for a slower, sharper blade. General instructions came with the stone. The quality of the material seems good and the stone is flat and smooth. I also like the rubber edge protector that comes with the stone. I intend to keep this with the stone to protect it when not in use. Overall, this seems to be a good product that works as advertised.

I have a few of these sharpening stones in different grits. They're such a great tool to have. You can sharpen so many different types of blades with them. The stone is very nice and great quality. Make sure you're following the instructions so you don't damage your stone or your blade. It's a nice hard material. This stone allows you to sharpen many blades before needing replaced. The instructions are easy to follow. It has a nice weight to it. This stone has versatility and functionality. This Whitestone sharpening stones is worth the money.

I used the Kintif 5000 grit sharpening stone to sharpen my cutlery, and the process took only a few minutes. The instructions were very clear, so I just threw some water on it and began to work. The block was large enough for my bigger blades as well as my smaller blades, and it felt very durable, thick, and well ground. The lines were straight, and the edges were smoothly beveled. The grit was clearly marked on the side and easily readable. It came with two removable rubber attachments for the top and bottom. The bottom piece stabilized the stone and gripped the surface well while I worked, and the top piece went on to protect it while it sat in storage. Washing, rinsing, and wiping down the stone took only a few minutes, making the whole experience quick and easy. I really enjoyed using this whetstone.

This whetstone worked nicely for touching up a few kitchen knives that had become dull over time. The #1000 grit strikes a good balance between sharpening and refining, especially for routine maintenance instead of heavy repair work. I appreciated that it was simple to use with just water and didn’t seem to clog up quickly during sharpening sessions. The surface stayed fairly consistent after several uses, which made it easier to keep an even angle while working. It does take a little practice if you are newer to hand sharpening, but that’s more about technique than the stone itself. For regular home cooks wanting sharper knives without spending a fortune, this feels like a practical option.