1460Pcs 1/4W 73 Values 1% Precision Metal Film Electronic Resistor Assortment Kit Set 1ohm-1Mohm for Arduino

Great value and variety. I also love that they came with a band legend sticker. That will be useful to stick on the lid of the sorting tray they will go into. On the down side; The pouches were not in order, a few of them were mislabeled (but the stamp on the ribbon was correct), and some of them were labeled differently even within the same value range. (See pictures) BUT, those few complaints are fairly trivial when you start to test and use these items; testing a random smattering of the resistors shows that they do indeed fall nicely within the 1% range, which is really all that matters here. Random tests pictured.

Pros: They're boxed up, in numerical ORDER by ohms! Easy to sift through and find the right ones Color chart Cons: sitting one out and forgetting the value, having to read the chart and TRY to see the color rings is unbearable when you have not-so-great vision. But they DO provide a chart which is really handy if push comes to shove. Would buy again for sure.

Lots of resistors with many values. The few test circuits I've built with them have worked as intended, so they seem to be accurate. I actually did have to test the resistance with a meter after my 10 year old disassembled my breadboard and made a pile of everything. I would have tried reading the codes, but they look like the bands were painted by a dog. I mean, the colors are not easy to differentiate, some are fairly thick bands while others are very narrow stripes, some are partially missing. It's hard to tell which end to read from. Bottom line, they're a pretty cheap price but they seem to work well (so far). As long as you pull them out of the baggies or use a meter to check them, you should be okay. Recommend.

All values measured well within tolerance. Each value packed separately and well marked. The leads were thinner than what I had hope, but that seems to be pretty standard now compared to years ago. Still not a problem if your using a quality breadboard.

A well-organized, complete selection within its range. Note that the largest value is 1Megohm - I need a few values between 1M and 10M and had to cover them separately. The resistor leads are thin but that is actually a convenience - two leads can fit in a single standard perfboard hole if needed. And they have held up just fine to bending, resoldering, etc so they are not flimsy at all.

Great selection of low wattage resisters. Accuracy is very close to markings. a great low cost order for your building hobby.

I needed 120 ohm 1% resistors. These aren't even close to 1%. The resistance measured on two different Fluke Digital meters, one a 4-1/2 digit, the other a 5-1/2 digit 4-Wire Ohms measurement showed about the same resistance, about 117.8 to 118 .2 ohms. A 1% resistance deviation at 1% tolerance would have been between 118.8 ohms and 121.2 ohms. Additionally, all the color bands are dark and very hard to read. I'm very disappointed!

THE RESISTERS WHERE A GREAT BUY DOES EVERY THING I WANTED IM WORKING ON AN ALTERNATIVE LIGHTING SYSTEM FOR MY HOME THESE WILL DO EVERYTHING I WILL WANT FOR A WILE THANK YOU RICHARD

Sehr praktisch mit den Tütchen

Easy to read, organized and a great addition to my R/C hobby.

Parfait pour mes montages audio. Plus besoin de chercher les valeurs. Ménage un temps incroyable.

Gutes Sortiment. Schon im Einsatz.

Die Widerstände sind getrennt, nach Werten sortiert und in kleinen beschrifteten Beuteln verpackt. Eine aufklebbare Farbcodetabelle lag auch bei.