




🎯 Elevate your home theater game with mounts that mean business!
The VideoSecu Universal Satellite Speaker Mounts (5-pack) offer a durable, injection-molded fiber resin polymer design supporting speakers up to 10 lbs. Featuring multiple tilt and swivel pivots, these mounts fit a wide range of home theater satellite speakers from top brands. Each pack includes all necessary hardware and tools for hassle-free installation on walls or ceilings, with customizable mount lengths for a sleek, professional setup.
| ASIN | B001QNBUA4 |
| Additional Features | Durability, Rotatable |
| Amazon Bestseller | #881,964 in Electronics ( See Top 100 in Electronics ) #1,311 in Speaker Mounts |
| Arm Length | 1 インチ |
| Brand | VideoSecu |
| Color | Black |
| Compatible Devices | Speakers |
| Compatible Phone Models | Speaker |
| Compatible with Vehicle Type | Automobile |
| Customer Reviews | 4.5 4.5 out of 5 stars (1,508) |
| Enclosure Material | Resin Metal |
| Global Trade Identification Number | 00791090650243 |
| Item Dimensions | 15.2 x 5.1 x 10.2 cm |
| Item Weight | 1 Pounds |
| Manufacturer | VideoSecu |
| Mfr Part Number | FBA_MS20B5 |
| Model Name | FBA_MS20B5 |
| Model Number | MS20B5 |
| Mounting Type | Ceiling Mount |
| Shape | Rectangular prism or square prism |
| UPC | 791090650243 887468396032 |
| Water Resistance Level | Not Water Resistant |
| Weight Capacity Maximum | 128 Ounces |
M**K
Easy install
G**T
I bought these mounts to go with the new satellite speakers for my Logitech Z906 system. Short and to the point: they work perfectly! I really like that they came with all the necessary mounting hardware (and then some). This means no headaches or troubles after the fact. Each mount is individually bagged with its own kit of mounting gear, making hardware detection a breeze, as there is no sorting through a consolidated mess of hardware. Perhaps the thing I liked the most, however, was the option to have a short mount or extended mount. These mounts include an extended section that you can either leave intact, or easily remove for a more flush, true mount. With the rotation of the sections and angle axle, you can literally mount your speakers in any direction you need with ease. I was originally planning on using the 3M mounting tape (bought separately) to fasten these, as I live in an apartment (to avoid damage). However, if you are planning on doing a similar type mount, just know that, simply put, that is NOT an option. There is no real backing on the mounts to secure the tape to, and thus there is not enough surface area to create a proper hold. The only way to mount these is with the included screws, which is the best way, anyway, and I'm actually glad about that fact, in hindsight. The speakers that I have attached to these are pretty heavy for their size, and these mounts hold them with mo problems. They are very tough and durable! As for some of the previous reviews, I read that someone had a problem with the screw not reaching through the mount and into the back of the speaker. It's my guess that they either had the mount backwards (the mounting screw goes inside the mount, and does not stick out the back, FYI), or they were using the wrong type of mounting screw. They include several types of mounting screws with each mount, so they really do take care of your needs. They even include a second wall-type mount to use for two- or four-screw hole mount speakers. I'm trying to think of a negative for these mounts, but I honestly can't think of any. In short, if you are looking for a good, strong, steady speaker mount for a fair price, these are your answer! I would recommend these mounts to anyone looking to mount a Logitech Z5500/Z906 speaker system, or any speaker system, really. They honestly are great mounts!
B**D
Great mounts with all hardware included. I'm using for a customer's Bose speakers. Built custom wall plates they mount to the give a nice clean look on cieling, as most people already have single gang boxes in cieling with speaker wire in. Bought blank wall plates and washer type screws to hold.
B**T
I bought these mounts in order to hang my new Yamaha speakers from the ceiling. Each speaker weighs 1 lb, so I cannot validate the claim that each mount supports up to 10 lbs. Overall it was a good purchase. Pros: - Obviously the price - $15.69 as of this writing - All elbows, joints, and pivot points work well and are tightened/loosened by a hex screw (allen wrench included) - Firm, solid support, at least for my 1-lb speakers, both in studs and in drywall ceiling with included anchors - Included is a variety of hardware (nuts, screws, and several bolts) to be compatible with many different kinds of speakers Cons: - The self-tapping screws strip easily when going into studs. The instructions recommend pre-drilling with a 1/8" bit. I would go up to 3/16. But I'm just guessing...I was dumb enough to adhere to the instructions for all three of the braces that I attached to studs, and each time at least one of the screws in each (out of two total per mount) started resisting really stubbornly when it was about 1/8" from fully in. - As other reviewers have said, the plastic washer spacer is indeed too small in diameter. Major, major foul on the manufacturer's part. I was able to find better ones from the hardware store for $0.30 a piece, but they were too long. I had to use a jigsaw blade to cut them in half (much harder than it sounds, because these things are so small). Anyway, I probably should have kept searching for a shorter washer, but I blame the mount manufacturer for all my troubles, minimal as they were, because I never should have had to go get my own washers in the first place...I expect products like this to come with the correct hardware. I almost gave this item three stars in light of Con #2. But when I ask myself "Would I buy this again?" the answer is yes. Overall, they work well, and nobody I know is going to beat this price. If you are buying your own speaker mounts, chances are you are handy enough to hold your own on projects like this. If you're not, however, and you're somehow or another intimidated by hardware and construction and hesitant to make your own modifications, these might not be for you, because of the hardware issues I mentioned above. Otherwise, they work great.
J**T
I love you Amazon! Sure, love is a strong word, but don't worry my Amazonian princess, we can take it as slow or fast as you want. Let me tell you though... When you provide such awesome products at such a cheap price you blow my mind - not my wallet - unlike some of my past relationships. Don't worry though Amazon, even though my ex-websites be cray-cray, and even though eBay is my baby-mama, I'm all yours. ...Anyway... These speaker mounts really are a killer deal for the price. I had no issues getting my Logitech Z906s mounted to the wall. For my rear speakers I picked up some mono price stands, which sadly, did NOT fit my speakers properly. The screws were too small! Fortunately, I had extra mounting screws in the VideoSecu 5-pack I ordered and was totally bailed out. I love it when you find affordable products like this that actually do what they claim... It can be few and far between. That said, due to the price, straightforward installation, extra hardware and decent instructions, they score 5 stars. Details if you care: - Secure enough not to fall off my wall. - Includes sheet rock installation hardware. - I recommend getting your drill out for the install (for the wall portion anyway.) - Don't over tighten anything. Hand tight is good enough! These aren't going to hold up well to Hulk-style tightening. You've been warned! - I used these to mount my Logitech Z906 speakers and they fit great. I've read that these work with other Logitech models as well. I can't vouch for any other brands but they seem quite universal. - I was worried because I have a single screw hole in the back of my speakers and none of the pictures show, in detail, a similar setup. Never fear. Buy them and try them! They worked fine for me and are cheap enough to take a chance on if you're unsure. - You are able to turn the speakers vertical, horizontal, or any direction in between.You can point them up or down. - If I'm not mistaken you could easy hide the speaker cable on the mount itself to make it look a bit cleaner. But you know... Some of us prefer the floppy trashy look. ;) Best of luck! Hope the review helps!
Trustpilot
1 month ago
2 days ago