attwood Outboard Kicker Motor Steering Kit 11663-7

Just as described. Will need cutting for your specific application, but works well

This is one of the best things I've ever purchased and a super price. Easy to measure and install. Steer you boat on the kicker from the console. No more sitting in the stern!

Install was super easy and works great. I can even tilt either motor with zero issues. My only knock is I wish the ball end screws were longer. I had a spot on the main motor that it did fit but only about 3/4 of the nut went on so I used some loctite to make sure it wouldn't come off. Kicker motor already has a factory hole but when I popped it in only like 1 or 2 threads sticking out so wouldn't work. Ended up putting a bolt thru I and used thier supplied steering clamp on that which actually worked out better for any clearance issues. 96 Force 75hp to an 88 Mercury Mariner 5Hp since nobody ever adds compatability

Works well . I custom made mounts at both motors .

Old rod was rusted out and this one was a quick and easy swap

Perfect item…. Seems all are universal, buy with confidence. I would buy again if needed

This product is quality construction, but its installation demands mechanical proficiency. It is crucial to have professional services if you are not mechanically inclined. The product's design allows for flexibility and ease of use, and due to the differences in boat configurations, installation planning is necessary.

2005 Honda 90 main motor with a2005 8 hp Honda kicker. Lift the kicker motor tiller and there is a metal flange that stops the tiller when it comes to rest back in the horizontal position. Drilled two hole in the flange and used two snow blower shear pins to mount the kicker side. Then clamped to the main motor steering and cut rod to length. Took about an hour. The kicker will still go all the way up to lock for travelling on the trailer. Hope this helps.

Se oxida inmediatamente.

Have not fitted as yet. But quality is excellent delivery time was good. Hopefully it will fit the purpose A++!+

Pretty much the standard for use on fishing boats around here. Works well.

Attaching it to an electric motor

Works perfectly so far for my application, I used a saws all to cut the threaded end of the rod a little at a time till I got it short enough to work but left it so I can cut it shorter if needed. They leave it extra long so nobody gets one too short for their situation. They advertise you can trim both motors independently which seems to work but I would still be careful and disconnect them until you learn the full range of travel. I have accidentally left them connected several times with no damage to the steering linkage though. My 2019 4hp mercury kicker did already have factory holes that matched perfectly with the hardware in the kit that has several different holes for different applications, so it was literally bolt on the kicker, then clamp on the main motor linkage, then go test it on the water. 10-15 hrs of trolling with it so far and it’s perfect. When trailering I disconnect the rod, trim up my main motor, install the transom saver, tie down my steering wheel, then reconnect this to my kicker so you have both motors secure and not flopping around. Dual purpose!