Acrylic Interior Car LED Strip Light with Wireless APP, RGBIC Dreamcolor 2 in 1 Ambient Lighting Kits, 16 Million Colors Sound Active Function Car Neon Lights, Sync to Music (dreamcolor 2 in 1)

They look perfest and super quality thank you good product👍

4/5 Stars These car ambient lights are a great addition to any vehicle! They’re impressively bright, the app is easy to use and works seamlessly, and there’s no buzzing noise like you sometimes get with cheaper options. The variety of colors is fantastic, the build quality feels solid, and the included instructions are clear and easy to follow. The only downside is that if you need to shorten the strips by cutting them, the final LED on the strip displays a different color than it should, which can be a little frustrating. Overall, though, a solid product that adds a stylish touch to your car!

Hi I bought the led lights at 02 may 2024 fitted it at 08 may 2024. At 15 may 2024 the right infornt door for the driver the strip doesn't work anymore. While the storage light working I have take the door off agian and I did double check on the strip and if it's plug in the main box good or no But unfortunately is not working at all I spoke with amazon to sort the problem but they make it more bigger one strip doesn't work anymore and I requested one new strip. They reject it and the answer I have to take all the item back which gonna cost me money and time to take everything off Small problem but no one care. I was looking for new strip for drive door to replace it and send the damaged one back

I had seen the mood lighting in Mercedes vehicles and really wanted it, but buying one just for that didn’t seem a good enough reason and was out of my budget. This LED kit, for much less than the price of a Mercedes, its brilliant. It has all the bits I wanted, footwell lights, door box lights, door handle lights and LED strips. Plus, with the dreamcolour kit you get multiple colours in the same LED strip. It’s worth going for the dreamcolour over the RGB version for just a bit more money. I thought I might be happy with just the static single colours of the RGB version and that the animations of the dreamcolour might be great for showing off in the car park but distracting while driving, so I’d end up leaving it in static colour mode all the time. But having gone for the dreamcolour there are many slow-moving effects that don’t distract. I’ve found normal LED tape can break just by looking at it, so I was worried I would damage these LED strips trying to fit them. But that is not the case with these, the LED strips have stood up to bending and being forced into trim gaps. Note that being thin and flat it can only really bend one way, there is only a bit of flex against the thick profile of the strip. If the line you want to follow goes out and in (like mine does going round the central console) you might struggle to get it to fit or have to stop at the bend cutting the strip short. I wanted it along the whole dash and managed to find a way to make it fit. In the back of the car, I was planning to fit the LED strip in the gap between the plastic and fabric trims on the rear doors, but the gap was just too tight. The panels were moulded together so I couldn’t take the fabric panel off to fit the strip and then replace the panel. However the smooth black side of the LED strip looks so smart, and the door is black, that when I held it up it looked almost as good held over the gap as it would inserted into it. I put double sided tape on the strip (not the tape the kit came with, I used Ultratape Extra Strong Foam Mounting Tape 25mm x 10m, I had to trim it from 25mm to 8mm wide, but it was the 0.8mm thickness I wanted. Not many double-sided tape listings gave the thickness, I got it from a station that sells tools, but it is available from sellers on Amazon) and just stuck the LED strip on the door. It looks just like another piece of door trim. I found a switched live in the main fuse box I could use with a fuse tap to power the main control unit, so it turns on and off with the ignition. If you are lucky, you will already have power in the doors you can tap into for the sub control units. I was hoping to find a supply that was switched via the ignition, but in my car it’s a permanent live. I was worried the sub controller would keep the lights on when the main controller gets turned off, but they have obviously thought if this, a quick test showed that the sub controllers turn the lights off when they loose contact with the master. In the off mode they don’t use much power, but you might want to add a hidden switch, so you can fully power off the sub controllers. It wasn’t listed in the Package Contents of the listing, but my kit also came with more than enough wire taps, the wire to wire version, not the type that tap a single wire and give you a socket to plug into that you might see used in fitting videos. You do have to be confident to take off the door cards and drill holes in them to fit the handle and box lights. I found some great videos on YouTube that showed how to do it for my car, it is much easier when you know where the screws and clips are hidden that hold the door card on. The only improvement I would make is to be able to control the brightness of the strips separately from the door handle, door box and footwell lights. The strips are much brighter than these and at night I would like to be able to dim the strips and leave the others at full. Overall, I’m really happy with the kit. It is bright, still visible on a bright day, and looks amazing fitted in my car. Even if you have no gaps or tight gaps it might work for you just sticking it on.

A very cheap kit. The strips themselves are very stiff and don't bend easily. The quality of the wires on the strips themselves was poor. This kit is straight from china just being resold for 3-4 times what it's worth. The one good key thing is that the sub units themselves don't need to be daisy chained together and they only need power to work in unison. Which is a great feauture but not mentioned in the instructions themselves. The app is also blatantly a Chinese app. I've seen the same/ similar app used for other items i got from Aliexpress. Due to the strips being so stiff they was tough to fit and made installation a lot harder. They kept popping out. It included some tape with no instruction on where it goes. Good idea would be to buy a fuse tap in kit and connect the live to it and wire it into a fuse which isn't active when the cars off in order to save battery life of the car.