Build Plate Double Sided PEO+PEI Sheet Smooth PEO Textured PEI Magnetic Heated Bed 235x235mm for Creality K1/Ender 3 V3 KE/Ender 3 V3 SE/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/CR-10 SE D Printer Accessories

定着悪くなったので交換です。 定着よく剥がれないです。

これを使うまでは初期レイヤーの接着に神経を使いましたが、PEIに変えてからはその心配がなくなりました。印刷中はしっかり接着しているのに、冷めると自ら剥がれてくれつところがとても良いです。

FlashForge Adventurer5MProで使用しています。 問題なく使えています。 性能的には特に純正との差異を感じません。 取っ手部分がむき出しなので取り出すとき純正より熱いかな。。。

文句なし 正規品と変わらぬ性能 見た目もいい

とてもお得に購入できたと思います。プレートも消耗品のようなのでお安く変えて良かったです。

Ender3 V3 SE で使っています。 使い始めてから途中で剥がれることが無くなりました。 フィラメントはPETGでザラザラの面に印刷しています。

印刷したらデコボコのつぶつぶがくっついてきます。

Ender 3 neoを静音化カスタムした物で使用。Ender 3 Neoは元々ガラスベッドのためマグネットも付属しており、価格も安いこちらを購入。 試しにPETGで印刷してみましたが、レベリング後に1発でうまくいって驚いています。しかも動画の通り外して少し折り曲げただけで綺麗に取れ、底面もめちゃくちゃ綺麗に仕上がってました。 今までは定着しない時にのりで誤魔化したり、ガラスベッド固定のクリップを取り外ししたりしてましたが不要になり快適です。 裏面のPEOも試してみましたが、定着が弱かったので定着がしやすいフィラメントTPEやTPU等で使えば良い感じなのかと思います。

Got it for my Ender-3 V3 KE. Fits perfect, works way better than the original one, and I was not expecting it to come with a magnetic sheet incase your printer doesn't have one.

Very sturdy print bed. It's value for Money/

Okay, real quick let me say, I order a ton of things on amazon and honestly, I almost never review things... That being said, I've used this build plate for all but 30 minutes so far, and I just had to hop on and write a review. I've been 3d printing for 7+ years at this point. I'm no expert by any means, but I have a fairly good understanding of what works and what doesn't. I can say with confidence that your first layer is the absolute most important part of every FDM print, and not being able to achieve that can be one of the most frustrating. On my latest printers, I've been using the factory plastic flexible PEI sheets. And while they have served me well, there are some downfalls. One being that in order to get a good stick, I have had to reduce the first layer speed by quite a bit. Another is that if you DO manage to get a good stick, it's because you had to print very slowly, or because you had to jam in that first layer, which can later make your print very hard to remove. I quickly ripped my first one, already replaced it once, and the second one has a small tear and visible signs of wear, despite being very careful and gentle with it. And lastly, with the factory PEI sheet, I've found that the temperature you remove your finished prints makes a big difference: You can't remove it too soon or else you risk flexing your part and leaving a bend before it's fully cooled. You let the build plate cool down too much, and that thing is so stuck that you end up tearing the PEI sheet trying to get it off. I've learned that you really gotta time it for the best luck at a clean removal, somewhere around 50-60 degrees C. THIS metal PEI sheet on the other hand, seems to be a whole new wonderful story. Rather than buying the factory build sheet, I did a bit of research and decided on this one. I replaced the old factory build sheet when it arrived today, leveled it by just eye-sight, and printed a quick 25-minute test. I noticed that without any struggle, the first layer seemed to stick great, not a single issue! I then forgot about the print when it finished, accidentally let the bed cool all the way down to room temp, and I was pleasantly surprised that the pieces popped right off at just the slightest touch. Evidently once it came down in temp, they almost popped themselves off, which is a huge plus! Already feeling the confidence of this build plate, I started another print about 10 minutes ago, and I went all out and jacked my first layer speed WAY up. Much faster than I normally would... and wow, it still stuck like an absolute champ! Very great first layer, no adhesion issues at all, I'm amazed. So far, I am already thinking this is going to save me a ton of time, give consistently great results, and maintain it's durability. As long as it lasts even just 50% longer than the others, it will be well worth it's money as this thing is very reasonably priced, but I think it will be solid for much longer than that. It feels much tougher than the flimsy plastic factory magnetic build sheets. Not to mention, it's gorgeous! Makes me feel like I have a booshie 3d printer now, with it's gold build plate lol. It's very pretty, and it even has a gloss side which I'm excited to try. Hoping I have similar results with that side with the addition of having a nice gloss finish on my prints, but even if not, the matte/textured side has already blown me away. I will be sure to update this review if anything changes, but so far, I would say if you're considering it, definitely give this build plate a shot! Great way to improve your 3D Printing experience.

The PEI Spring Steel Bed is the “mic drop” upgrade my Ender 3 didn’t know it was waiting for. First off, adhesion is flawless. Prints stick like they’ve found their forever home while printing, and then—like magic—pop right off once it cools. No scraping, no swearing, no praying to the 3D print gods. Just clean, reliable results every time. The double-sided texture is awesome: one side leaves a pro-looking textured finish, the other side gives you a smooth base—it’s like having two beds in one. And because it’s magnetic and flexible, I can just lift, flex, and watch my print slide off like butter. 🧈 The spring steel is tough but lightweight, and swapping it on my Ender 3 was as easy as snapping on a magnet (literally). Now my printer feels like it leveled up from “DIY tinkerer” to “pro shop” overnight. In short: sticky when I need it, effortless release after. This PEI bed is the ultimate quality-of-life upgrade for anyone who loves printing but hates prying. If Cinderella was a 3D printer, this would be her glass slipper.

The original PEI plate that came with my Creality Ender 3 V2 Neo printer was fine for six months, but after lots of scraping to get the prints off, the surface became quite uneven and I found that it was difficult to get even adhesion for my prints, especially when doing a full plate. I decided to try this new mat out, especially the smooth side, and WOW! The bed is now level consistently all the way through, levelling is an absolute breeze, the prints stick beautifully, even for small details and they are so easy to remove from the mat. As soon as the prints cool, they usually slide or pop straight off, no need for scraping like the old textured mat that I had. I haven’t tried the textured side of this one yet, because I’m just so happy with the smooth side and you really can’t beat that price. I would buy this mat ten times over, it’s made such a difference to my prints! The textured mat would leave a rough texture underneath the prints, which was okay, but I wasn’t a massive fan. This one leaves no texture at all, except for the actual texture of the print itself. I much prefer having a smoother side, especially for things like earrings where the other side may be visible. It helps that this plate is magnetic just like my old one, so I didn’t have to use the magnetic film that came with it, I just put it on, levelled and away it went. Great to have an extra magnetic film though, for when my old one shows enough wear.