Superclear Table Top Epoxy Resin 1 Gallon Kit, Crystal Clear 1:1 Coating | Self-leveling coating for bar tops, countertops, tumblers & wood. Anti-yellowing, UV resistant, food-safe, Made in USA

I have purchased this product several times and I am 100% satisfied with it. It mixes well and is crystal clear. I use it to put down layers onto table tops and to cast resin pens. The table tops pour out nice and I spread it out with a foam paint brush. I only have to get the thickness close as the resin then self-levels. Once it's spread out I use a heat gun to pop any surface bubbles. I then go away for 5 to 10 minutes. I return to use the heat gun to pop any micro-bubbles that have formed. It's hard to see them, but if you look at the surface at a steep angle while passing the heat gun over the resin you can see them pop. I am only passing the heat gun over the resin at the speed you might use a paint brush. I am not trying to heat the resin, just pop the bubbles. Then it's time to wait. 24 hours it's ready for me to apply another layer. I put things like old maps on the table so I will do 3 or 4 layers of resin.With the pens, I mix the resin and split it up into 2 or 3 small cups. I then add special dyes and glitters to each and stir well. I then let the resin sit for 10 to 15 minutes so that when I pour them into the pen mold, the different colors swirl around each other but don't mix together too much.I also tried a Chinese resin and I was not happy with how reliably it mixed. Sometimes it took several days to get fully hard. I have always had 100% success with this American made product and I can always take it out of the mold 24 hours later. I highly recommend this product.

Applied to bathroom hickory wood sink vanity tops. Came out GREAT!! Just remember to apply a thin skim coat to seal the wood and prevent the bubbles, then apply the full coating, allow to thoroughly dry before orbital sanding starting at 150 grit, finish with 800 - 1200 grit to eliminate the high gloss.

This epoxy resin was super easy to work with. The directions were very clear. I only needed one coat to create an extremely clear and durable resin coat on my 24x 26” coffee table. So far the durability is tremendous especially since there is a three year old running around and being a 3 year old. The quality is great.

Decent quality dries clear but no matter what I did including following the directions there was still bubbles. Appears decent and is durable. Cure time is good and hardened well. Effective for what I needed

this product seems to work well so far. the seller has been reputable and took care of a shipping problem with no issues.

Great stuff. I added some charcoal that I powdered up, as well as some powdered up brass plumbing fitting. I just used a grinder and collected the powder. Threw it all in this stuff and it looks great. Also I put a little glitter I think I don't know. It's a bit scratched up but that's because I abuse it it's a workbench more than a table top. The stuff is really hard and durable.

Works great!

NOT easy to work with in colder temps. Going to have to shelve this for warmer weather. Super thick. And even when I warmed it (as instructed) the bubbles in the mix made it quite milky. It made me nervous to try it. The bubbles did come out with multiple passes of a heat gun. But it was just difficult & way too time consuming to work with. Hoping it will be easier when it's warmer.