Uharbour Torque Wrench Set 1/4, 3/8, 1/2 Inch, 3-25, 5-60, 20-230 Nm, Adapter, 3% Accuracy, 72 Teeth Ratchet for Car, Motorcycle, Bicycle

An excellant product that meets 100% with the description given. Easy to use and a must have tool if you wish to ensure correct torque values where such criticality is required.

I needed a strong set of torque wrenches for the work I do, I've gone through several cheaper versions that's been costly. First impression case looks good not too flimsy, I like the ease of use of the pull down and twist to torque settings wanted. It locks in place well and the socket sizes being available makes this set feel functional and versatile. The accuracy is confirmed by the sheet included and I tested my ones against another wrench I had, it was spot on. I've had to deal with some very difficult bolts on calipers to shocks and they feel great against these stubborn corroded bolts. Overall I'm glad I've spent a bit more money on these as they're reliable only time will tell on how long they last obviously. What I paid reflects what I've got and glad I purchased these.

This torque wrench tightens from 3nm to 200nm. This range of settings was just what I was looking for to work on my motorbike. Seems pretty well made but took me a bit to figure out how to adjust for different settings. I watched a YouTube video of a different make that had the same 6 button setup. Tried it out with a nut and bolt held in my vice to get an idea of how it operates. It has LED indication lights that go, green, amber and red/vibration when the correct level of torque has been reached. The first thing on the bike to do is to set the oil drain plug torque once I magage to remove the old one, it has been over tightened. I will post further updates on the reliability. I would recommend it so far 👍

Far better quality than the price would suggest. I’d buy snap on if I was using them every day. But for occasional use these are great.

I would highly recommend these only one small issue the 1/2 inch torque wrench is a bit short but it's still very manageable and easy to use

I prefer a mechanical wrench as it lets go when you hit the torque. I found it really difficult (...not possible) to get the torque I wanted as the adaptor only beeps and shows the figure which is rapidly changing on the display. This is a challenge with all digital adaptors, there's nothing wrong with this per se.

Exactly what you need for sorting out tyre / wheel nuts 120nm, brake pad mounting guides at 90nm, brake calliper's at 30nm and brake disc screws at 8nm!

I was expecting it to work for higher tensions, but it blew me away for lower part of the range.

Tried it out the moment I received the wrench. Got a digital gauge to check the accuracy. Couldn't get the lower end to confirm because my digital meter range isn't there. But between 60 in-lb to 200 in-lb, it's accurate enough within 5%. A little icky as I would prefer a slight better accuracy, but it'll make do since torqueing in this range of tightness can be very generic. I'll also mention some of the good and bad here: The reading marks on the torque wrench are very visible. Normally I'll be reserved on my opinion because I don't believe black ink against chrome works that well, but this one does. The turn action feels a bit tight, but not to the point where I'll have to really muscle with it. So that's good. The lock ring is a bit weird to work with, but excuse me for griping because I've been too used to the Craftsman torque wrenches. But it does lock well. There are some residual paint burs right at the top edge of the turn knob; but after a few turns those are grounded out. The clicking mechanism works well, both sound and feel are crisp and the ratcheting action is very smooth and resolute. I believe it's got a 72-tooth setup, so the movement is on the smaller side which is good; makes it easier to rock back and forth to get the torque in. Besides a few small gripes, I'll give it an overall 5-stars rating, accuracy can probably be improved if this is re-calibrated; which I don't know how.

I was looking for a torque screw driver and this one caught my eye. I wanted it to go to 8 inch lbs. Although not rated below 10 inch lbs, I had it tested for 8 in lbs.. After 10 attempts its range average was 7.9 inch lbs. I am very impressed with this tool. Works great and my buddy wants one now. Price range was why I choose this one.

Absolutely fantastic torque meter. It's accurate (tested against an analog one) and I torqued down the cylinder head bolts with it. Thank you!

seems to do its job well and first impressions are good, can't yet speak to longevity.

Its actually quite accurate. At least a little deviation with the clicky torque wrenches. Tested it out of 3, range it was 'off' was 2-5nm at most