Iota A62 AM5 Air CPU Cooler with Digital Display for High Performance Build

After many years using liquid coolers, I decided to go back to an air cooler and I’m very pleased with the choice. The build quality is excellent, and in terms of performance it doesn’t fall behind the liquid coolers I’ve used before. On top of that, the design is very well executed and pleasantly surprised me. I believe I’ll stick with this setup for many years to come.

Best value for money. Build quality is fine. Easy mounting. And superb cooling and airflow. Well, I use it now with a Ryzen 5 5600X (previously I had the very good ID-Cooling SE-224 XT). My decision to purchase this was because I am upgrading soon to AM5 platform (with a 9800X3D). It keeps my actual processor below 60-65 C, no noticeable sound, and fits perfect in my Corsair Frame 4000D case. No RGB? That's exactly what I was looking for, since my case is over my desk, and I need no distractions with lights. The panel showing temp of CPU or GPU is basic but gives you what it's expected: info. Previously I saw some tech test reviews on YT and results were very impressive. Forgot to mention that I got it at discount price of 33 USD only!! A true bargain.

It is a very nice looking cpu cooler. The display is clear, although it's viewing angles are not very good. If you have the computer more in front you may find the display a little hard to read. It is keeping my 7700x cpu cool enough. As I am sure everyone is aware the 7000 series of am5 processors boost as hard as they can, basically making almost any cooler reach tempts many would find uncomfortable. I am taking one star off for the noise, compared to other dual tower coolers I have used this seems a bit louder. Nothing unmanageable but you can hear it. Installation is not really ground breaking, you will have to mess with the fan clips, although it was straight forward and mostly painless. The biggest installation complaint I would have it it uses a usb header for the temp screen, but the cable is short. So you will most likely have to run it around your gpu versus the back side of your case hiding it better.

This was a great performing CPU air cooler from Ocypus! The thermals on my brothers cpu (AMD RYZEN 5 5600x) were superb under idle and under heavy gaming/testing. The cooler comes with two 120 mm fans, each capable of spinning up to 2000 rpm. The dual tower setup allows for more heat to be dispersed, allowing for up to 260W of power to be used by your CPU. The temp display is plenty bright and can be made out even through mesh side panels. Noise levels on this cooler were impressive, even at high rpms. The height of this cooler makes it compatible with most cases that have a cooler clearance of at least 7 inches. Overall, 10/10 in the performance department and the same can be said for its aesthetic, simple yet striking.

Thing is awesome dropped my ryzen 7 5600x idle temp from 60°c to 40°c and the display is great. Fits over tall ram nicely and install was easy. Hardest part was the fan clips but that wasnt hard either.

Probably the coolest both literally and figuratively CPU cooler there is without looking too overly done. Needed something to cool my AMD Ryzen 9 5900XT and this is definitely it. It’s on the bigger side, but hot running CPU’s definitely need this. Update* Stress tested computer and it cools great. Keep in mind if you get the dual tower with two fans you use Fan1 and Fan2 pins or in my case CPUPump1 if fan 2 is N/A. You will more than likely have to enter bios to adjust the fan / pump type, but I do this anyways because I run custom fan curves. Definitely worth the money spent! Will buy another one here soon for another build!

Beautiful cooler and the display is neat, moved fans to exhaust side so I could see the fancy design on the heatsink. but this cooler just can't keep up with a 9800x3D. 95+ under stress test, hovers around 80 in games. Rather loud at 70%+ fan speed. Display consistently shows +5-10 deg from bios/andrenalin which is confusing since don't they use the same temp sensors? The little logo on the front is a sticker that doesn't come or installed, so don't worry about having to remove it. I had a $20 single tower/single fan cooler that cooled better and was slightly quieter. But this looks a lot nicer so I'll probably keep it anyway.

Why did you pick this product vs others?: Overall the fan is pretty cool. However the fans are louder than the competition. I will probably change the fans at some point for some better quality fans. If you don't play with headphones, then you will definitely notice the fan noise. Maybe the total decibal isn't bad, but the actual "tone" of the fans are really annoying as it's a higher pitch whirling.

デザインが結構好みだったので、サブPC用に購入してみました。 フィン状態や塗装もケース外から見た感じは気にならず、値段相応です。 9700XをOCで使っていますが、冷却面は普通に問題なし。 まぁデュアルファンで9700Xくらいは余裕なのは当然ですが、静音で安定使用できるレベルであるのは助かります。 気になる点としては、他レビューでも出ていますが、ソフト面と表示バグがたまにあるということですね。 自動インストールができないのに入っていたり、バックグラウンド常時起動だったり、スリープ解除後等でたまにバグって表示出なかったりなどがあります。 この辺は新興メーカーでまだ洗練されていない感は否めませんが、全体的に悪くはないという感想です。

يستاهل كل فلس حاطه مع Ryzen 7 7800x3d والحراره يالله يالله تطق ٨٠ مع ساعات متواصله من الضغط حط ببالك نقطه مهمه تهوية الكيس هي اللي فعلا تفرق بين الحراره

Very quiet and low temp. Those with high temps probably installed incorrectly. Or paste application is wrong.

ヒートシンクのサイドや前面背面処理がAK620にソックリ 温度表示がドット表示でおしゃれ。温度表示にはWindows用のアプリをダウンロードしてインストールする必要あります。 もう一方のヒートシンクの上部のOcypusロゴは好き嫌いが分かれそう。 各部の仕上げは丁寧です。 14600ｋでアイドル時30℃前半、CINEBENCH R23 10回ループで80℃後半 普段使っている水冷と遜色ない冷却性能 強力ファンなので70％超えた辺りからうるさい。 常用域を50～70%くらいの回転数に調整すれば気にならないと思う ごく一般的な取り付け方法なので難しいことはない メモリやVRMヒートシンクとの干渉もよほど背が高いものでなければ大丈夫 グリスは付属するが少量、性能も不明。ドライバは付属しないので長めのドライバが必要 AK620のファンを強化して温度表示を追加した、という印象。 表示部を簡素（？）化して2ndファンをオフセット無しで取り付けられるのは温度表示というギミックと冷却性能を両立できる点で良いと思う

たまに温度が表示されなくなることがあるけど、Ryzen7 9800x3dを十分に冷やしてくれるからいい感じ