NICE-POWER Digital Microscope Camera, 13MP 1080P HDMI VGA Industrial Video Microscope, 150X Zoom C-Mount Lens, Foldable Stand, LED Ring Light, Soldering Microscopes for Electronics Repair

I wanted a microscope that was able to display on a screen. This one was rated overall pick. It has been pretty good so far. Good quality and easy to setup. Connects via HDMI or VGA cable which is nice to have options. The remote it came with did not have a battery installed but it did come with the plastic insert that keeps batteries from discharging, which seemed odd if they didn't even put a battery in it. All in all a decent microscope for the money.

Works great for my working on watches. These old eyes ain't what they used to be this really helps. The arm could use some more work I'll be replacing that though. It did require me to download an app on my laptop to use

When I first looked at this system after receiving it, I was extremely annoyed that the provided instructions were minimal to the extreme. Once hooked up and powered up, the labels/instructions are in Chinese. I did get the thing powered up, but to repeat, there is essentially no documentation included. Picture on the TV is clear and sharp, so I guess this is a reasonable purchase.

Beginner electronics repair guy. This so far is a good first camera for me to accomplish my goals, possible informational videos in the future. HMDI connection works great, haven’t tried VGA nor will I. I plan to get a nicer camera down the line but I think this was a smart buy.

me hubiera gustado que tubiera enfoque automatico pero esta bien al precio

I bought this for the price and focus height. It does quite well in those categories. I'd estimate I've been using it at around 12" (28 cm) and could easily raise it a bit higher since the focus isn't near maximum. It's been great for viewing traces and solder pads/connections on circuit boards. There's plenty of working room.Where it looses stars:1. The pivot screw closest to the camera is flimsy. I've had to secure the cables to help hold some of the weight to keep the camera from drooping with or without the light attached.2. The clamp is very small. I cannot fit the clamp over the edge of my table enough to grab a solid part. If your table isn't a perfectly square shape at the extreme edge, this will not clamp on.3. The resolution is quite poor with both VGA and HDMI. It's incredibly grainy picture has nothing to do with megapixels or final resolution. It looks almost like they took a 240p sensor and upscaled it to 1080P. A true 1080P would have a real original pixel for each pixel on my 1080p monitor. This clearly does not. Text on microchips is easier to read than without it, but telling the difference between "P"/"R", "K"/"X", "C"/G" is still a struggle sometimes.4. There's no power switch on the cord. This means, to turn it off and on, I have to literally unplug it by crawling under the desk or pulling on the camera. This is horrible for when it's so flimsy, although it seems to settle close to where it was previously. Adjusting the focus can also be the same struggle because simply touching it moves the focal length, then when you let go after rotating the focus it's instantly uncalibrated again. A careful steady hand has been enough for me, but could be very problematic for some people.Overall, it gets the job done and I'll keep it. It's high above my work surface and in my budget. One mixed up letter in a part number is still usually resolved by a Google search offering a correction. Adding supports to not rely exclusively on the clamp and pivot keeps it stable enough for me (I do not move it around).

This is the first microscope I have purchased for my electronic repair hobby projects. I'm amazed by the quilty of the camera the zoom feature it has. I can see all the smd capitors and ic chips that need to be micro soldered now. Trying to see all the hdmi pins that you can't see without the microscope and led ring light was nearly impossible. All the things you get for less than $90 is amazing. People say the tilting arm is bad but I didn't have a problem with mine, it holds in place were I need to to go just have to make sure you tighten the screw the holds the camera on. With this only being a 13mp camera is amazing would recommend to any hobbyist.

Works great for what i need it for.. PCB repairs.

Producto CHINO que evade impuestos y no factura en MEXICO

Overall it is a nice microscope setupThe view is clear and focus is greatThe only downside is a design flaw and mounting option and this is just me being pickyIt was difficult to finally get it oriented in a way that showed proper orientation on the screen as the mount point is on the side of the device the camera then displays it in that orientation and if I’m moving things around trying to match my movements with what is on screen it wasn’t correctly mimicking what I did.Side note I’m using this for wood burning as I’m visually impaired and this is better than getting a CCTV.Overall pleased but as I said was a bit of a challenge to get properly set upAlso would have loved a direct connection to pc but the price difference was too much to justify.

yeah

Great microscope, but the power button had an issueThe microscope itself is very good. I really like it and find it very useful and practical. However, the power button on my unit did not work properly. When I turned it off, it would turn itself back on.Because of this issue, I returned the microscope and ordered a replacement. Hopefully, I won’t have the same problem with the new one. We’ll see how it goes.