FC3 Upgraded Facial Interface Compatible with Meta Quest 3 Accessories

This interface is absolutely perfect. It comes with two padded interface covers: a pleather one and a soft gel memory foam one. Oh my gosh the soft gel memory foam is so comfortable. I absolutely love it. It keeps my face cool. It doesn't cause me to sweat excessively. I'm talking about hundreds of hours of use in this interface. I love the click adjustment to increase the distance between the lenses and my eyes. It is just phenomenal. It fits my glasses. It's easy to take off, put back on, and wash. I use my Quest 3 for VR cardio in Beat Saber every night. I have had this since the middle of February. I've missed maybe one or two nights since then and this has been just an absolute game changer. Throw out the OEM interface. Don't look at any other interface. This is such a perfect interface. It is so comfortable. It is so incredibly comfortable. Seriously the only thing that keeps me from wearing my Quest 3 at this point 24/7 is the fact that the headset itself weighs six tons on my nose and forehead. It puts a lot of strain on my neck and back, which causes it to hurt after a while. If it wasn't so heavy I would literally wear this headset with the AMVR-powered headstrap with the fan on it and this interface. I could wear this forever. It's so incredibly comfortable. I keep repeating that because it's true. I can't recommend this enough. Absolutely love it!

I bought this because lets be honest. The Original Meta Quest 3 Faceplate is horrible and after a single hour i;t already starts to feel super uncomfortable. This one on the other hand i played for 2-3 hours straight and felt no discomfort at all. I read the other reviews before purchasing it and so i immediately swapped tot he cooling silk Gel facepad which is super soft and comfortable and had no issues. The facepads themselves are swappable via a v3elcro on the back side and on the faceplate itself. My only complaint is that when i swapped from the leatherette pad to the silk pad i couldnt quite get it to line up perfectly so it sits a bit closer to the nose than i would like. It is super easy to install in place of the original as its just a a couple clicks but it fits perfectly and you cant beat the price. The quality and sturdiness of this honestly seems like it would be on par with something that would instead cost $70-100. 10/10 and 100% recommend getting this to replace the original faceplate/pad

Way better than the stock facial interface. I cpuld see light where my nose is on the stock one. This one makes a perfect seal so no outside light gets in.

I've tried a few aftermarket facial interfaces for the Quest 3 and this was definitely the best. It's not perfect, there's a tiny bit of light bleed from the edges when height is dialed out to maximum, but it does the trick comfortably. Good value, effortless setup and fit on the Q3, lightweight and great padding. The two included pads are both plush and comfy. Would recommend for sure.

Got this for my MetaQuest 3 and it is so much better than what came with the MetaQuest. Much more comfortable and easier to keep clean. Highly recommend.

So I was having issues with the face cover that came with my Quest 3 as it just wasn’t comfortable for longer sessions. Decided to try this one out and I’m glad I did. I was a bit nervous about ordering it because I use the BOBOVR halo and wasn’t sure if it would play nice together. Good news is it works fine! It’s a tiny bit snug where the halo strap sits but honestly it’s not even noticeable when you’re using it. The comfort difference is huge. Like, I can actually use my Quest 3 for a couple hours now without my face feeling sore. The padding is way better than the stock one and just feels more premium overall. The knob adjustment thing works well too, nice to be able to fine tune the fit when wearing glasses. Installation was super easy, just swapped it right out. Build quality seems solid, definitely feels like an upgrade from the basic foam padding that comes with the headset. If you’re on the fence about getting this because you’re having comfort issues with the original face cover, just get it. It’s one of those small upgrades that actually makes a noticeable difference. Especially if you’re doing longer VR sessions, your face will thank you.

Super comfortable, customizable, and easy to clean. The nose flaps can be a little fiddly sometimes, but when used right you get true blackout with virtually no light leakage which is important for me. Everything is high quality and has held up well for about a year now, I would certainly buy these again if needed.

I have used the stock Meta facial interface almost daily for nearly two years and it finally wore out, and I want any third-party product to be an improvement in all aspects, and this item is not that. It has some advantages and some disadvantages compared to the stock item. What's better in this one is the total light blockage, and I had no idea how much that would improve the immersive experience of the headset. Also, the adjustment knobs are nice and give you good control, whereas the little buttons inside the meta product are flimsy and awkward. What is not as good in these, and really not even close, are the pads that rest against your forehead. These pads really need a lot more padding. The cushions feel thin and they "bottom out" - I can feel the hard frame against my forehead. These are mushy and flat and don't have the plump, cushiony feel of the meta item. This one comes with two pads, and they attach with Velcro and are super easy to swap out. One of them is absorbent and designed for sweating. I found myself dabbing it with a towel to dry it after a workout, but it was fine while wearing. The leathery one absorbs nothing and made my face sweat while no other part of me was. Both of them need to be firmer and a lot thicker to be considered comfortable. One other minor thing - if you order this, let it air out before wearing. The rubbery part came out of the box with an unpleasant odor, but it cleared up in a day. I'm going to keep using this but am disappointed with the thin face pads.

I've had various facial interfaces for both Quest 2 and my current Quest 3 and this one has been the best by far. Easy to assemble and the nose piece actually stays in place whilst you're putting the rest of it together. The adjustment wheels are great for altering the distance between the lenses and your face and allow you to make the tweaks whilst you're wearing the headset, unlike previous versions I've owned where you need to remove the headset to make any adjustments. Initially I had a bit of light leakage from underneath around my nose but this was soon rectified once I realised that the rubber nose surround needs to sit on the outside of the facia rather than inside (as per the attached picture). There's no light leakage at all now :-) As for compatibility, I'm currently using this with a Nord Quest battery strap and am able to get the headset positioned perfectly, but I specifically bought it (because of the vents) to use with the BOBOVR S3 headstrap with fan, which is currently on its way. However, the vents appear to be working well without a fan as I've had no lens fogging despite doing some strenuous workouts and sweating like a sweaty thing! It's a bit more expensive than other interfaces I've bought but I just wish I'd bought it sooner. Worth every penny!

Bardzo fajna nakładka. Super przylega do twarzy. Dużo lepsza niż standardowa. Okulary korekcyjne pasują bez problemu. Pasuje z bobovr M3 Pro.

Muy cómodo de usar, si mejora bastante la experiencia con las gafas y que tengan las perillas para ajustar la distancia de las gafas es muy útil

Questa interfaccia per Quest 3 è decisamente più ergonomica di quella in dotazione. Le imbottiture intercambiabili la rendono più fresca e si può regolare la distanza del visore dal viso. Per chi usa il Quest per molte ore, è un acquisto che consiglio.

Great accessories to my Quest 3. Much more comfortable than the OEM facial interface.