PAC LP7-2 L.O.C. PRO Series 2-Channel Line Output Converter with Remote Turn On 4in. x 8in. x 1in.

Not everbody has speakers in the trunk. I have a 2009 toyota matrix. My 4 speakers are located in all of my doors only. So i had no choice but to install the pac lp7-2 behind my stock radio. I looked up toyota matrix radio wiring diagram on google and had to tap into the harness. I only had to tap 3 wires. The 12 volt constant, Right rear positive and Right rear negative. I am using a mono amp so one speaker tapped will do the trick perfect. The ground i needed to hook up to was located on the chassis with a radio ground already hooked to it so i just loosened the bolt and added the ground wire from the lp7-2 (picture of what that looks like included). I installed the 4 guage amp kit in my car like i normally would if i was using an aftermarket radio. So the remote wire from my amp was then connected to the super awesome remote wire that is on the lp7-2 (So glad i did not have to use the fusebox or something wierd like that). Got the RCA's connected and tested out the radio to see if my amp turned on and off and to test the volume and tune it. It instantly worked like a charm very deep bass from my alpine type r 12's and alpine amp no problem whatsoever highly recommend this product. Best line output converter i have ever used without a doubt. Great quality

It was easy to wire in love how it works and great for my 2016 ford fusion. I have recommended to a buddy and he is going to by one

Perfect solution to my problem, as I added 2 aftermarket amplifiers to my factory stereo in my 2013 Ford explorer limited and needed the high output converter with remote turn on. Really excited with the sound quality and everything works without static or voltage drop, so I really recommend this product.

Perfect for eliminating the 'pop' sound from speakers when starting the car with the audio system already on. Its even better than the kiscloc (kicker). It requires an additional 12v wire unlike the kicker model.

Works and sounds great. good value for what it is . Over all a really good LOC! For cars with out bass rolloff

I have a 2019 Chevy Silverado. It wasn’t hard to install my amplifier. I tapped into the fuse box on the passenger side for the remote but I wanted more. I wanted to be able to press the power button on the radio and listen to music with out having to have the truck on like when I’m cleaning the interior for example. Well I came across this converter last night and I am beyond pleased with it. I’ve tried other brands which failed bad. It’s so easy to install and the sound quality is amazing! I’m so happy that this product actually works lol Thank you PAC for making such a great product!! This definitely saved me time and accomplished what I wanted.

I hooked up a Subwoofer with this to a factory Toyota head unit. It works and I think I have a pretty clean signal going back to the amp. I had an issue with the signal only reaching about 2 Amps but I called technical support that is from the USA and the guy was super helpful. He explained that this was normal and dependent on my head unit. I am probably one of the few people that likes to read manuals and though what they have is pretty easy to understand, I think they could give a little more info and specs. Luckily they have knowledgeable people to help not only with their product but he gave me some info on how to fine tune my amp a bit to get the best sound. Would recommend this product and more so this company to a friend for sure. **(Not really sure why they are asking me to rate this product for sheerness?)

Best line output converter don’t have to run remote wire

Good build and quality Can be used without power and ground wires (In case you don't need remote turn on for the amplifier) Clean sound and easy to install with proper directions provided to install in the instructions leaflet Highly recommended

Awesome product, worked as suppose, even though there are no distortion noise, however the subwoofer is a little low, if your stereo has sub decrease on volume input then your sub wont be as loud, however for the implementation of sub this is perfect for the job and for a entry level low output converter.

Have bought 2 of these, I installed the first one close to my foot rest in my car, kicked it to death eventually, got a second before I upgraded, in a pinch for installing subs in a factory radio vehicle, it works great, as long as you only want to install one amp

El paquete llego totalmente nuevo cerrrado y con sus sellos de seguridad. Cumple con las expectativas y funciona correctamente. Espero en un futuro no tener ningun problema y que la vida util sea larga.

Removed noise from my system