Laser Engraver Integrated Enclosure with LED Light, Fireproof and Dustproof Protective Cover 28.3 * 28.3 * 15.7, Exhaust Fan 4000RPM and Pipe, Against Smoke Odor and Noise Eye Protection-Black

It took me about 1 hour to assemble. My laser etcher fits perfectly. The fan pulls smoke out. The light is a bonus.

Nice laser engraver enclosure. Seems to work well with the exhaust fan. I structions are vagie for the fan installation. Otherwise good product.

Absolutely great product, I vented it to the outside vent in my garage and no more smoke and very light smell now when I laser engrave. Easy assembly.

An enclosure is needed and this one works. Be aware that this listing is a Creality Enclosure 2.0 by default, but you can select a SKY branded one that also includes a light for a few dollars less. They appear to be the same except the name and the light. So for $5 less you can trade the Creality name for an LED light. I purchased the Creality Eclosure 2.0 branded one. It is easy to setup and gives ample room for the wiring and such. I hung the air hose from one of the metal rails on the top so it doesn't get caught up sitting on the table. The door opens up all the way across the top to the back of the enclosure allowing very good access. The zipper works very well, not sticking or snagging along the way. Not all is good. If you have OCD then you will not like the permanent wrinkles in the window plastics from being folded up in the box. The fan wires are affixed so that if you tug on it you are tugging against the solder connection so do not tug on the fan wire. I wrapped a couple rubber bands to help keep it from being tugged. The fan is cheap but it seems like it should work ok for short runs. They do not include the window adapter. They also expect you to just use the metal fan guard on the inside of the enclosure up against the fan on the outside, with the enclosure cloth sandwiched in between them, without any flange in front of either - not the best for air tightness and ensuring trouble free fan rotation. Fortunately someone has provided a solution for this with 3D print files available for free online. I got the Creality enclosure with no light provided but I had a 5V LED Rope light that works good for this. You can download free 3D Print files to make the flanges, the hose adapters and even a complete window insert. Search for Creality Enclosure Adapters or Sky Enclosure Adapters. You can see the gray and purple parts in my pics are the 3D printed ones. There is also a complete window width insert not in my pics that can be printed as well. I give 4 stars for this, it works good by containing the laser smoke and smell but could have been better. The hose ends were just cut with wire poking out and not wrapped and sealed. They should have included a couple flat flanges to sandwich the enclosure material good and maybe even a window insert or a link to a 3D print download to make one. In my pics you can see the gray and purple parts I 3D printed to improve the fit and seal. You can see the big rubber band I put around the fan so as to not have the wire tugged on. No switch on the wire btw, you have to plug and unplug. They could also have chosen a flat thin box so as to not fold the window plastic but chose narrow thick box.

Great for the price! I was not expecting total containment of odor since this is a soft zipper enclosure. It does a good job to be honest. I 3d printed an adaptor to vent the laser out of my window. The included fan does a good job of pumping the smoke out. Get the non branded version and it comes with a free light bar. I am using this with a Phecda/elegoo 20W laser.

We had started an Etsy shop and wanted to get into laser burning signs etc. I bought this with my laser, got it all set up in my small shop. This cover works great, with the fan on. You cannot use this without some sort of exhaust, your laser will smoke you out of the place you have it set up in. I would definitely buy this again, if I needed to. Right now this is holding up very well. It helps to keep the laser clean with no dust build up. Highly recommend.

The seller was amazing in getting me a replacement so I could use the enclosure. After looking through forums and facebook groups, Creality hasn't quite nailed down making sure everything in the box is correct on their enclosures. The enclosure itself is not bad at all. It won't compare to a custom build or pricier enclosure but it does the job advertised. You will need to do some extra work to seal the enclosure around your bench/stand so smoke does not escape from the bottom. It was easy to assemble once I had all of the correct parts. The zipper is well sealed and there's plenty of space. The front, top bar gets in the way when trying to work inside of the enclosure and I'm hoping to figure out a way to remedy the issue so I don't have to work around it.

This is something I wish I had bought sooner. It took care of the smell problem with my old homemade enclosure, I can see the work with the inspection panels, very durable build, and easy to assemble. Definitely worth the investment. The size is PERFECT for my Ortur Laser Master 2. It's even flame retardant. Definitely built with safety in mind. No cut corners.

I simply love this product. Lots of space inside. I'm currently using a 400mm x 400mm engraver and I still have ample space. The free led light and blower fan are perfect. Highly recommended product.

bigger than I anticipated

Funciona muy bien. Fácil de armar. Contiene bien el humo y el olor. La lámpara alumbra bastante bien. Tarda un poco en sacar todo el humo cuando termino de cortar pero es cuestión de darle unos segundos más antes de abrirla. Ojalá existiera en tamaño más grande para máquina de 90x40.

Es excelente, detiene todo el humo, solo sale muy poco del olor, pero no mucho, pero el humo si lo saca por la manguera flexible. Lo volvería a comprar. Un detalle, califique con 1 estrella el envío pero fue por error, creí que estaba calificando otro producto que me llegó con una semana tarde pero no era este producto, este llegó en la fecha en que debía llegar.

NO ES UN GRABADOR LASER. ES UN ENGAÑO..... Solo es un kit para que armes un protector.