Spigen Classic C1 MagFit Case for iPhone 16 Pro Max, Compatible with MagSafe Accessories - Bondi Blue

Let's address the obvious first: This case design is inspired by the iconic iMac G3 and man, does it look good. I've never chosen phone cases based on their looks in the past but this is the first time the aesthetics stood out. If you had one of those classic iMacs in the late 90s, this case will give you that nostalgic feeling, but with your modern tech.The case itself comes in three parts: A shock-absorbing TPU inner layer with a 3D design on the back, a translucent backing made from hard polycarbonate, and a white bottom piece that snaps into place. The back design is nothing short of gorgeous, the component shapes on the back of the TPU layer are all 3D and not just a flat printed image, so the lighting changes when you angle the phone in different directions. The back plate has a matte grippy texture on the outside with a vivid colour that lets the internals peek through. I have the iconic Bondi blue colour but it's also available in graphite grey and ruby red based on the 2000 iMac line. It would've been nice if they also made these in the blueberry, strawberry, lime, tangerine, and grape colours of the 1999 iMac line though but sadly those aren't available. The bottom piece snaps into place and is very sturdy, it doesn't rattle and won't come off during normal use. Even if I grip the case and pull, it stays in place. I have to use my fingernail to pry into the gap in order to remove it, so there's no need to worry about it coming apart.Despite the matte outer texture, the inside of the back plate is glossy and prone to scratches. If you try to remove dust from it, be sure to use a soft microfibre cloth to avoid scratching it. Scratches on the inside aren't very obvious when the case is fully assembled but just keep this in mind.The case is also compatible with MagSafe chargers, the magnets are strong and held the weight of my phone on a charger with no problem. I could also use a MagSafe power bank without it falling off. However the thickness of the back plate means that there will be an added 2mm of distance between the back of the phone and any wireless chargers, so bear in mind that this increased distance could reduce the efficiency of wireless charging.When fully assembled, the case measures 83.0mm wide, 165.0mm tall, 12.8mm thick around the body and 14.0mm thick when including the camera bump. It weighs 290g which is a little heavier than most other cases but I don't find it tiring to hold. Speaking of holding, the case has a really nice rounded edge that resembles the shape of the 1st generation iPhone, this actually makes the phone much easier to grip and hold than the phone's own flat edges.On the bottom, there are cutouts that perfectly align with the speaker and charging port. It doesn't obstruct any of them and the charging port gap is wide enough that I can use any of my charging cables without getting blocked by the case. The buttons are clicky, but I noticed that the Action Button feels a little mushy compared to the volume keys are was harder to press.With a thick case, thermal retention is something to consider. I ran a game for 30 minutes on high graphical settings and the front surface of the phone was 39.1ºC (102.4ºF) while the back was 38.0ºC (100.2ºF). It felt warm to the touch, but the phone never gave an overheating warning and after closing the game the heat dissipated within minutes.All-in-all, I really like this case. It's the most eye-catching one I've ever owned for any phone and it doesn't compromise on the protection provided. Highly recommended, especially if you're nostalgic for the late 90s iMac aesthetic.

Easy to put-on however not easy to remove. Good quality, fit perfectly. Dropped it a few times with no damage to the cover as well

This is a really cute case. Paying homage to one of Apple’s most iconic Mac designs of the past, it really does feel solidly put together unlike most nostalgia inducing products on the market. I’ve dropped my phone a few times now with this case fitted and the case doesn’t have a single scratch.Spigen historically have made some really solid protective products, this being another fine example. However, this might be one of the first products from Spigen that I’ve bought where it’s not all perfect.First off, the feel of the case is gorgeous, very comfortable to hold and gives a very good sense of security. This case is bulkier than most iPhone cases on the market, but when you see the detail on the reverse of the case, you can understand (and hopefully appreciate) why.The USB-C port cutout at the bottom of the case is big enough that you can use most cables with it, and MagSafe and button functionality works well for the most part.However, I have found the MagSafe functionality isn’t as strong on this case as some of Spigen’s other iPhone cases (a few times now, I’ve had issues getting the phone to stick to a MagSafe charger/stand without fuss, and the phone easily being knocked off compared to other MagSafe cases), and the action button is quite tough to use on this case with no real tactile feedback to know when it’s been pressed compared to the other buttons.Despite these minor niggling issues, this is an excellent case and it does what it needs to do. Throw in the nostalgic design and it’s almost perfect for Apple fans.

Great case. Looks good and works well. Strong magnets.

I always seen these cases online. I thought they looked great and I love the transparent tech of the 90s, so I got myself one of these cases for my 16 pro Max, but they are not durable at all. The design is very nice and when you hold it, it feels sturdy but the slightest knocks can cause the plastic to chip away or the painting to come off. I returned it and never got a refund.I ended up replacing it with an MOUS case

Fits my phone just fine and looks amazing too, I love the retro aesthetic as I used one of the Mac g3 its based off when I was in school. only problem I find is I can't stand it up on some surfaces as the plastic it's made of makes it slide easily.

I purchased this phone case due to the nostalgia factor. it looks great, and I was really looking forward to using it, however upon receiving it and unpackaging it, I noticed that the case is extremely flimsy and not up to par with typical Spigen quality. The case itself seems as if it would break if it fell, and it would not protect my phone, for this reason, I am returning it.

I've tried almost every case under the sun in the past 10 years, I've fallen in and out of love with everything.At first I had the Spigen hybrids, then the Spigen clear, then Casetify, then DBrand, then Mous and I saw this on Reddit, I ordered one for my new iPhone 15 Pro Max and my god is it beautiful.The case just looks and feels quality, it feels great in the hand and is absolutely stunning to look at. It's had so many compliments and I feel as though I almost need a case for my case to protect this thing. The retro look never gets old and the transparency on the back is just gorgeous.The only thing I will say is that I found that online reviewers got a much nicer box than me. They got a C1 collectors box with 90s goodies, I would have loved this even more as a consumer buying a premium product. Please make this available!