HUANUO Single Monitor Mount, 13 to 32 Inch Gas Spring Monitor Arm, Adjustable Stand, Vesa Mount with Clamp and Grommet Base - Fits 4.4 to 19.8lbs LCD Computer Monitors

I’m using this HUANUO monitor arm with my Alienware AW3425DW (34 inch ultrawide), and it handles it perfectly. Setup was simple, and the arm feels solid with zero wobble once tightened. The gas spring adjustment took a minute to get right for the monitor’s weight, but once balanced, it moves smoothly and stays exactly where I want it. Cable management is clean, the clamp is secure on my desk, and the overall look is sleek. I was a little unsure if it could support a heavier ultrawide like the AW3425DW, but it’s been completely stable. No sagging, no slipping, just solid performance. If you need a reliable, affordable mount that can hold a large monitor, this one works great.

I was super impressed with the quality of this. I haven't used many monitor arms, so I don't have much to compare it to, but for the price this seems great. It was fairly easy to put together and comes with directions, it has all the tools needed in the box. It's heavy (in a good way), and the gas element was easy to adjust with the included tool. Read the directions, they don't recommend adjusting it until the weight of the monitor is on it for safety. I was okay, but I did start messing with it before attaching the monitor and apparently that's not a good idea. I used the clamp attachment, and it felt very solid. It does require having a desk/table that can accommodate it, but I would recommend it. There is an option for a screw in attachment, but you'd need a hole so it might require some drilling. Once set-up, the monitor had a great range of movement and it felt nice to use. For the price, this feels like a no brainer if you need a monitor arm.

For around $30, this is a solid upgrade over a stock monitor stand and it immediately improves desk space and the look of a setup. If you mainly want a cleaner aesthetic and do not plan on constantly moving your monitor around, it does the job. The downside is that it feels budget when you actually adjust it. When I move the monitor closer or farther, the screen can slightly tilt, which means I have to re-level it afterward. That would not be a big deal, except tilt adjustments are very stiff once you tighten everything enough to keep the monitor from drifting. You basically have to tighten it hard for stability, and then fine tilt adjustments become annoying. A few minor notes: The base has a logo sticker, but it comes off easily. It is not especially sleek compared to more premium arms. My desk is thick (metal frame underneath), and this arm’s clamp range is part of why I bought it in the first place. I bought mine in 2022, so I cannot speak to newer revisions. I still rate it highly because it works if you tighten everything down and treat it like a “set it once” arm. If you want smooth repositioning and easy tilt changes, spend more on a better gas-spring arm.

So I have to make this a bit of a mixed review because there are apparently a couple versions of this out there. The first one I ordered was great. I bought it to try it out and see if it was viable. It helped that the price was great compared to other monitor arms. Once that worked out, I went and bought two more. One of the ones I received was different from the others. The main arm components are the same but the mounting hardware was different. The first two had a single solid screw and three points on the bracket that goes under the desktop mount were metal nobs that fit into three holes to keep the whole thing rigid. For the third one, there was no central solid screw but three smaller ones that fit into those three holes and somehow felt less secure (though it was still solid once screwed into place). At first I didn't think anything of it but then when I mounted the monitor on the arm, I had to adjust the mid-arm tension and the end point to max to hold the monitor in place. The other two were near perfect and didn't require much of any adjustments (and all three monitors are the same exact model/make so no differences in weight/dimensions). So, if you get this and the manual reads HNSS6 then you're going to likely get the good experience. If you get one where the manual (not the box) reads HNSS6/HNSS6W, then your mileage may vary. I honestly thought I was going to have to return the arm because the monitor just wanted to tilt down. As far as the two other arms, putting it together was really straightforward. Once I got the hang of it from the first one, the others took maybe 5 minutes to assemble? And once in use, it's been great. These are not really made for vertical movement once set in place. There's a tension screw you have to use a hex wrench on to adjust height. But horizonal movement along the reach of the arm as well as rotating the monitor left and right is great. Doesn't feel flimsy or unsafe. So much easier to shift my monitors around as I move controllers in place (e.g., flight stick) or if I need to get behind them (one side sort of blocks access to drawers but now that I can rotate the monitor it isn't a problem compared to the static monitor mount I had before.

Solid monitor arm, does as good of a job as expensive arms at more than half the cost and doesn't sag at all. I'm using a HP 24 inch monitor and it works great with this mount. The desk mounting hardware is surprisingly sturdy for how low-tech it is. The VESA mounting plate on the arm also works great with zero noticeable issues thus far. If you're worried about how the mount will cope with a very thin desk (thickness less than 0.59") I recommend getting the support plate for it as it could potentially ruin your desk with heavier monitors. PROS: • Looks good and functionally great • Built in cable routing • Lots of adjustment points • Lightweight but still durable • Easy mounting job, clear instructions CONS: • Not suitable for glass desks and could be risky with honeycomb material desks Overall, this is a really good choice if you use a wooden (or other solid material) desk. Ideal for professional or casual use. 10/10

I had a dual monitor stand before. But I needed to make some changes on my desk setup so I got 2 single monitor stands. Based on the reviews I got this HuAnUo brand. I got two of them recently. I just installed them. The assembly was a breeze. All parts were in the package. The product quality seems good and sturdy. My 32 inch monitors hung well on these stands. It is stable and the movement is smooth. Lots good angle tilt options and space saving as well. I felt like I have more space on my desk setup my big monitors weight is hold on it well. Hope this stands will stay strong like this one year from now.

My corner desk houses my gaming PC and my dual monitor work setup. Needless to say, this leaves very little surface area for me to actually use the desk for anything that doesn't require a keyboard. I purchased this, not expecting it to actually work (no reason, just my own inexperience) and was pleasantly surprised by the ease of use. Installation was a breeze, though it's much easier putting the mounted monitor on with a pair of helping hands. It can be done on your own but it would make the process faster. Seems good quality, I've had it for 4 months and not a single complaint. Feels very heavy duty. All needed hardware was included, directions were very straight forward. This does work with curved monitors. This took my desk from an overwhelming cluttery mess to a cool little gaming area and I'm so happy. I want to get a second monitor and if I do, I plan on using the same mount on that one as well.

I have been using this mount now for almost a whole year. I have changed monitors several times. I have used two different 32-in monitors. One was flat and one was round and fairly heavy. I was worried about this mount handling the weight of such large monitors, but it is advertised to handle a 32-in. Even with the heavier monitor the weight is no problem. Even with the arm fully extended, it holds the weight of the monitor just fine and keeps it in position. When fully extended it might shake a little bit if the desk gets bumped, but I am surprised at how steady it is. It was also extremely easy to adjust and get set up. There are a few other similar mounts on Amazon for a cheaper price, but I plan on buying two more of these because I am impressed with the value and quality. I recently bought a three monitor mount hoping it would hold my three screens in a wrap-around racing setup. The arms didn't extend quite long enough so I have decided to buy three individual mounts instead. When I do buy two more of these and get them set up I will post a picture in a future review.