Peel and Stick Metal Molding Trim, Self-Adhesive Stainless Steel for Wall, Fireplace, Mirror Edging and Craft Decoration (Brushed Silver, 20ft x 1in)

Great product is very easy to cut and use really enhance the look in my kitchen. The only question I would give which is listed in the description. It will cut your finger very easily. It is very sharp, but otherwise great product.

I ordered one that was used. It was already cut in sections which worked for. The edges are sharp and I cut myself so be careful. Stick rating is very good. If you mess up, you will take paint off like I did. The metal was a plastic covering on front which protects it until you use it. It shines! I am impressed. If you need a stainless strip that self sticks, this product is for you.

The molding trim was of good quality there was some flexibility in the material be careful trim has sharp edges use gloves . I would advise that you buy the trim cutter scissors metal cannot be cut correctly with regular scissors. Also the front of trim has a very thin piece of plastic that must be pulled off before applying the trim to the actual mirror . Once you stick the metal trim to the mirror and press it against the mirror the adhesive works well it sticks. I added flowers and butterflies to bring out the trim.

After reading reviews of "Amazon Vine" members, I see that Amazon has a wide window of acceptance for this Appellation. The photos of this trim on Amazon explicitly state " Please wear gloves and cut with tin snips". Nonetheless, several "Vine" reviewers complained that it was hard to cut (using household scissors? - no kidding?!) One Vine person even thought this SS trim was aluminum! Another thought a magnet could stick to it (perhaps that person was sent 400-series SS, rather than the 300-series that I bought?) But here is my biggest shock - not a single reviewer measured how thick it was nor explained the sharp edge problem. My review of the 1"-wide SS strip: The cutting process that the factory uses apparently creates a razor-sharp burr that points away from the finished surface. Please see photo#1. I was able to use a carbide-tipped tool to remove this sharp edge manually from 3"-long strips that I cut, but it took some effort, for sure. As of my writing, not a single reviewer has mentioned how thick this SS trim is, even though that was certainly of keen interest to me. I used my micrometer, after de-burring, and I measured a thickness of 0.011"-thick. (To be diligent, I spent some considerable effort to scrape away all of the burr) I purchased this trim to act as a force-spreader for a "girdle" that I built to reinforce weak spots on 65-gallon HDPE rain barrels that I had purchased. After fusing the cracks shut and fusing SS reinforcing screen into the barrel wall over the cracks with an extra coating of melted HDPE, I wrapped four 1/32" multistranded 316SS cables around the circumference at a height where the HDPE wall had split and leaked. The barrels are actually rounded octagons, and this means that there are eight high points around the circumference where the tension cables might cut right into (and through!) the HDPE barrel wall, so I cut 3" lengths of Coengwui SS trim to go over the high points. See photo#2. I transferred 65 gallons of water into the barrel and, so far, no leaking and no taut 1/32" SS cables cutting into the barrel, notwithstanding 520 pounds of water inside. The 0.012"-thick SS trim is unimpressed by the taut cables.

Good product

I used this product to cover up the gold edge molding between the mirror and the counter backsplash. Everything in my bathroom was brushed nickel except this piece. I never knew how to cover up the gold mirror trim until I came across this product. The application was easy. I would suggest using a sturdy and sharp pair of shears to cut the metal molding so that you get a clean, nice looking edge to work with. Do wear gloves because the edges of the molding are a bit sharp and can cause a paper cut-like cut if you are working with bare hands and happen to run your finger over the edge while smoothing out the metal trim. Once you have installed the trim and smoothed out the bumps, etc., go back and apply pressure, in smaller sections, along the length of the trim to ensure a good adhesion.

I have purchased this item before and it worked spectacularly well, but for some reason this time around it gets a zero!! Not good.

I used this to cover a gap on the backsplash behind our cooktop, which appeared after I replaced the vent fan over it. Be advised, however, that the edge of this strip material is extremely sharp, and can cut your fingers (don't ask how I know this).

viene muy bien presentado y con las indicaciones básicas de uso

Sobald man die Schutzfolie abzieht, ist die Farbe etwas heller und glänzender als auf dem Bildschirm zu erkennen ist. Qualität ist aber einwandfrei. Die Klebefläche ist nur mittig vom Band und geht nicht ganz bis zu den Rändern, hält aber super gut auf funierten Untergrund.

Parfait !!!

Le ruban se bosse trop facilement en l'appliquant.

Klebt nicht richtig,und ist mit der dazugehörigen Schere ( dich extra bestellt habe) gar zu schneiden! Biegt sich in alle Richtungen und dementsprechend nicht mehr zu gebrauchen