MONTECH XR-B, ATX Mid-Tower PC Gaming Case, 3x120mm ARGB PWM Fans Pre-Installed, Full-View Dual Tempered Glass Panel, Wood-Grain Design I/O Interface, 4090 GPUs, 360mm Radiator Support, Black

It's a great tower, especially for the price. If you're looking for a case that won't break the bank, but will look amazing showing off the inside of your computer, this is one to look at. The built in RGB fans look great if you're into that and they provide plenty of airflow to keep temperatures stable. There's room at the top to add a radiator for a watercooler, and also plenty of space for an air cool tower if you prefer. Cable management is easy, with rubber gaskets surrounding the holes and a good bit of space hidden behind the panel. It is a bit of a tight squeeze and I had to apply a little pressure to get that side back on the case, but I am very happy with the final results.

This PC case is amazing! I bought this case to replace my be quiet case that looked ugly, and I switched from an aio to an air cooler. Pros: -Size: Mid tower but has a lot of room -Fans: The 3 preinstalled fans are pre daisy chained which made installing easy. -High quality: The case is super high quality, lots of cable management room, the process for installing the components were easy and straight forward compared to my be quiet case. -Easy to add extra case fans: I bought thermalright c12c-s fans in a 5 pack and installed 3 intake on the bottom and 2 exhaust fans on the top middle. They all connected so all my components have the same rgb showing at the same time Cons: -Glass: came dirty with scratches, I tried to clean it but it didn't come out. Isn't a big deal to me

A very nice case at this price point. Looks great. Super easy cable management. Airflow is nice.

Lots of room, airy, easy to work with, easy to hide wires. I LOVE the power button on the lower front of the case, I'm so tired of power buttons on top, it's not friendly for cat owners because those lovable furballs WILL get on top when you aren't looking and switch the pc off. I also dropped the big front panel on the floor, edge first and while giving me a stroke and fear of it shattering, IT DID NOT. Super sturdy. Heavy. Good design.

Great fishtank ATX PC case with lots of mounting options versatile for fan mounting including 360 and 240 mm liquid coolers. It also has mounting for 120 and 140mm fans and mounting on the PSU base with the screws including. The case also comes with 3 ARGB fans that are daisy chainable so no hub was needed for me. It also comes with all the accessories you will need. Its a great value pc case if you want the bigger ATX size compared to other smaller M-ATX cases. Case also has front usb type c, one single front panel connector, captive screws, mesh filters and supports all gpu sizes. There is also lots of space for cable management with cable ties and zip ties included. After these few months I have had no issues.

Based on my experience, I'm giving the case 4 stars primarily because one of the fans are already flickering after just one month, conveniently past the return window I might add (Looked into potential solutions, didn't find one that resolved the issue. Don't use a controller/software(s) for the rgb, I leave the color as default and it's only the 1 fan that flickers so bulb issue?). I also didn't find this out until after, but to my knowledge, Monotech doesn't sell these fans separately, so you'd have to find a replacement fan elsewhere. Otherwise, case works as intended, fans come pre-daisy chained (which is nice), mounts are preinstalled, plenty of screws, magnetic dust filters, and at least 2 reusable cable ties. My takeaway is that the case is overall good, especially compared to other prices. If you buy it off Amazon, make sure the seller is from Montech (Amazon discreetly changes who sells you items without warning so check before buying). If you care about something being potentially defective, it could be best to check computer stores nearby for availability, especially if you manage to also get a warranty for a small difference. I'm not as big on rgb customization as others, while the flickering does bug me sometimes, I'm typically distracted with other matters. Otherwise, I'd probably rate it lower, just because I know there are a lot of people who care a lot about customization. (subject to change this for a replacement fan)

Love this case! Looks great, all the parts in, and I really like the fans (strong LEDs and quiet compared to the Corsair fans I bought). All ports and cables work and 1000w PSU fit without issue but would recommend installing it before running wires into that area. The case is on the smaller size for a midtower (which is what I needed). There was a broken clip and solder piece rolling around inside the case. Had no idea what the clip was for but noticed extra in the parts bag. After my build I went to put the glass panel back on and noticed where the broken clip came from, it's what holds the glass panels to the chassis. Had no idea how to fit them (no instructions worth a damn in the box) and figured it was from behind, but AIO was blocking. Took off AIO and realized that's not how to install the clips. :-( You can fit from the front by putting one side in first and then push gently to pop in the other side. The chassis framing is thin, so always lift/move with both hands to distribute the weight.

This is easily the best PC case I've ever worked in for this price. It comes with great pre-installed fans, which are already daisy chained together. It also has front io cables combined into one easy plug so you don't have to mess with that too much. There are YouTube videos if you search up this case that will allow you to construct your own pc in it very easily. The metal is high quality, it comes with top and bottom dust filters, and just does exactly what you need from a case like this. I fit a gigabyte 9060xt 16gb gpu in with plenty of room to spare. I'm sure 50 series cards would similarly fit great. Cable management is a breeze due to the removable side panel and the rubber grommets, typically only found on high end cases. Absolutely recommended.

cost to performance is top notch, very easy to build and it has a lot of space. PREMIUM quality but cheaper. awesome!

Se me hace excelente. El único pero que le pongo es que la parte inferior no está muy bien diseñada para instalar abanicos. Tuve que improvisar con unos tornillos más delgados que los que se supone que son para mis abanicos; no pregunten cómo los fijé. Todo lo demás, incluyendo los abanicos preinstalados, es muy bueno.

Très beau boitier de pc.

Il est très beau et assez spacieux pour mettre des GPU et des watercooling large. Vraiment très fier de mon achat.

The glass broke while assembling pc and can't find a replacement easily.