- Hot air rotating hair dryer brush with 32mm rotating ceramic barrel.
- 2 heat settings and 2 rotation speeds, plus cool for setting the style.
- Powerful 700W hot air motor.
- Super ionic smoothing conditioners for frizz-free styling.
- Perfect to dry and style shorter than jaw-length hair, adding body and shape with smoothness and shine.
Product Description
-------------------
32mm rotating ceramic hot air styler is specifically designed
for shorter styles above the jawline and fringes. The unique
rotating brush adds volume, body and shape whilst the style's
super ionic conditioners guarantee an effortless smooth salon
blow dry result at home.
INSTRUCTIONS FOR USE
• Ensure the hair is 80% dry and combed through to remove any
tangles. Divide the hair into sections.
• To turn the appliance on, slide the switch to the heat setting
suitable for the hair type.
• Place the brush underneath the hair section close to the scalp
and hold for a few seconds to boost volume at the roots.
• Use the brush to lift the hair at the roots as you dry.
• Move the appliance down through the hair and start to rotate
the brush away from your head by pressing and holding the
appropriate rotation button.
• As you do this, resist the rotation of the brush by pulling
the brush downwards. This will create tension through the section
of hair. IMPORTANT! It may take several attempts toperfect this
technique, if the brush spins too quickly, simply release the
rotation button and remove from the hair.
• As you reach the ends of the hair section, continue rotating
the brush to roll the ends under. • For even more volume, place
the brushat the end of the hair section and allow the brush to
rotate along the hair section by pressing and holding the
appropriate rotate button. Wind the entire section of hair around
the barrel until you reach the root. Release the rotate button
and then hold the brush in the hair for a few seconds. • Repeat
as necessary.
• After use, switch off and unplug the appliance.
• Allow to cool before storing away.
• Place protective shield over brush head to protect the
bristles. Please see the ‘Protective Cover’ section for direction
Heat Settings
If you have delicate, fine, bleached or coloured hair, use the
lower heat settings. For thicker hair, use the higher heat
settings. It is suggested to always complete a test on initial
use to ensure the correct temperature is used on the hair type.
Start on the lowest setting and increase the temperature until
desired result is achieved. There are 2 heats plus a cool
setting. Slide the ‘on/off’ switch to the first position to
select the cool setting ‘*’, the second position for the low heat
‘I’, and the third position for the high heat ‘II’. Rotation
Settings To make the brush head rotate, press and hold the
buttons marked <>, this will make the brush head rotate clockwise
and anti[1]clockwise. NOTE: When the appliance is used on the
cool setting, the brush head will not rotate. Protective Cover
After every use, always ensure the protective cover is placed
over the brush head. This protects the bristles from damage. When
placing the protective cover over the brush head, ensure to line
it up with the grooves around the top of the airstyler so it
slides easily into place.
NOTE: The diagr,m on the protective cover demonstrates the
direction it should be placed on to the brush head. If placed on
incorrectly it may bedifficult to remove. CLEANING & MAINTENANCE
To help keep your appliance in the best possible condition follow
the steps below: • Ensure the appliance is switched off,
unplugged and cool. To clean the outside of the appliance, wipe
with a damp cloth. Make sure that no water enters the appliance
and it is completely dry before use. • Do not wrap the lead
around the appliance, instead coil the lead loosely by the side
of the appliance. • Do not use the appliance at a stretch from
the power point. • Always unplug after use. Cleaning the Rear
Filter • Unplug the appliance and let it cool completely before
cleaning it. • Using a soft brush, clean any hair and other
debris from the filter.
Directions
----------
Ensure the hair is 80% dry and combed through to remove any
tangles. Divide the hair into sections. To turn the appliance on,
slide the switch to the heat setting suitable for the hair type.
Place the brush underneath the hair section close to the scalp
and hold for a few seconds to boost volume at the roots. Use the
brush to lift the hair at the roots as you dry. Move the
appliance down through the hair and start to rotate the brush
away from your head by pressing and holding the appropriate
rotation button. As you do this, resist the rotation of the brush
by pulling the brush downwards. This will create tension through
the section of hair. IMPORTANT! It may take several attempts to
perfect this technique, if the brush spins too quickly, simply
release the rotation button and remove from the hair. As you
reach the ends of the hair section, continue rotating the brush
to roll the ends under. For even more volume, place the brush at
the end of the hair section and allow the brush to rotate along
the hair section by pressing and holding the appropriate rotate
button. Wind the entire section of hair around the barrel until
you reach the root. Release the rotate button and then hold the
brush in the hair for a few seconds. Repeat as necessary. After
use, switch off and unplug the appliance. Allow to cool before
storing away. Place protective shield over brush head to protect
the bristles. Please see the ‘Protective Cover’ section for
direction. Heat Settings If you have delicate, fine, bleached or
coloured hair, use the lower heat settings. For thicker hair, use
the higher heat settings. It is suggested to always complete a
test on initial use to ensure the correct temperature is used on
the hair type. Start on the lowest setting and increase the
temperature until desired result is achieved. There are 2 heats
plus a cool setting. Slide the ‘on/off’ switch to the first
position to select the cool setting ‘*’, the second position for
the low heat ‘I’, and the third position for the high heat ‘II’.
Rotation Settings To make the brush head rotate, press and hold
the buttons marked <>, this will make the brush head rotate
clockwise and anti-clockwise. NOTE: When the appliance is used on
the cool setting, the brush head will not rotate. Protective
Cover After every use, always ensure the protective cover is
placed over the brush head. This protects the bristles from
damage. When placing the protective cover over the brush head,
ensure to line it up with the grooves around the top of the
airstyler so it slides easily into place. NOTE: The diagram on
the protective cover demonstrates the direction it should be
placed on to the brush head. If placed on incorrectly it may be
difficult to remove. Cleaning & Maintenance To help keep your
appliance in the best possible condition follow the steps below:
• Ensure the appliance is switched off, unplugged and cool. To
clean the outside of the appliance, wipe with a damp cloth. Make
sure that no water enters the appliance and it is completely dry
before use. • Do not wrap the lead around the appliance, instead
coil the lead loosely by the side of the appliance. • Do not use
the appliance at a stretch from the power point. • Always unplug
after use. Cleaning the Rear Filter • Unplug the appliance and
let it cool completely before cleaning it. • Using a soft brush,
clean any hair and other debris from the filter.
P.when('A').execute(function(A) {
A.on('a:expander:toggle_description:toggle:collapse',
function(data) {
window.scroll(0, data.expander.$expander[0].offsetTop-100);
});
});
Box Contains
------------
1 x Big Hair Air Styler; 1 x Protective shield; 1 x Instruction
booklet
See more ( javascript:void(0) )