Best Choice Products Folding Sewing Table Multipurpose Craft Station & Side Desk with Compact Design, Wheels, Shelves, Storage Trays, Pegs, Magnetic Doors, Metal Doorknobs - Light Brown

Super cute little sewing table. Easy to assemble and light weight. However, for a novice assembler like myself it took me about 2 1/2 hours to put it together instead of the 60 minutes suggested on the instruction manual. For a more experienced assembler I can see how they could put it together within 60 minutes. Instructions were easy to follow, but I did come across a few hiccups. First issue was the table top. I initially put the table top on incorrectly with it opening up to the wrong side. I didn’t find this out until I was completely done putting the table together. However, it was an easy fix. I just had to unlock the 4 cam locks under the table top, switch the table top so it flipped open to the correct side and put the cam locks back on. I also had difficulty attaching the door by myself. I accidentally knocked the bottom shelf off the door panel twice while trying to attach the door, which caused the screws to not attach the back shelf panel securely to the side panels after that. I had to replace the two screws that were provided with two longer screws of my own to secure the shelf panels. Even though you can attach the door by yourself, having an extra pair of hands to hold the door up for you while you screw on the hinges would be so much easier (I wish I had the extra pair of hands). I’m currently using this sewing table to hold my Cricut stuff, so the storage capacity is sufficient and it feels sturdy. It’s compact enough to not take up too much space. It’s met all my expectations. Again, the issues I came across while assembling the sewing table were all assembler caused. I included a picture of the tools I used, especially that magnet tool I needed to help me remove the cam locks. I also used two philip screwdrivers for the different size handles. Hope you enjoy your new sewing table as much as I do, if you choose to purchase one. :)

I love this little sewing table! It was pretty easy to assemble. The front opens and has all the storage needed for all the basic sewing tools. When opened, it becomes a full sewing station. When the top unfolds it provides a good bit of space to put a sewing/cutting board for measuring, cutting, pinning etc. When it's folded it's pretty compact, and it rolls! I absolutely love it! I purchased a green one. Great value for the money. And I do recommend this item to any and all who are in need of a small, mobile sewing station.

This arrived in excellent shape straight out of the box. It was simple to put together following the instructions. Problem came at the very end. The first picture shows that there is a piece missing from the veneer on the inside. There’s no way this could’ve gotten damaged because I did not even open up the top until it was all put together. Second thing is the hole in the top on the outside. I thought was kind of interesting until I went back to the instructions and realized I to put a dowel in the top of the door. Unfortunately, now that I put the dowel in the top of the door, the door won’t close so I have to sand it off a bit. I think it will be fine. In all, it took me probably three hours to put together. I worked on it a little bit every day for three days so it’s hard to really pinpoint the time. If you’re really good with a screw drill use a screw drill. It will save your hand a lot. Don’t overscrew the screws if you are using a screw drill. It is MDF and it will destroy it. The only other issue I have which I don’t really think is too horrendously a deal, is the dowels that go in the bobbin/spool holders are too big for the holes. Little sandpaper and will be done. I am just very interested on what I’m going to do to fix the top of this. All in all I would give it 4 1/2 stars just because it is what you pay for. It’s not super solid, but it doesn’t matter because you’re not paying for super solid stuff. You’re paying for something to hide something so that you don’t have to look at it every day. It’s a good value for the money easy to put together well packaged.

We have an extensive sewing/quilting room, and we needed a piece that would match the other furniture, be rolling, and hold thread. This met all expectations, looking quite similar in finish to the Kangaroo furniture we have. Assembly was straight forward, and all the parts were there. It meets all the functions we have, and folds down easily, although we will probably leave it opened up. Note that when the table is extended, it is supported only along one edge, so it will not support much weight. Overall a good value and we are happy for the purchase.

Ok, it's more like 4.7 out of 5 stars because I have some issues with the bobbin racks but I'll get to that. We just moved and I finally have a space that is fully my own to do something with - no more dragging my sewing machine to where it was convenient for me to work. So what do I need? I need a sewing cabinet! But we just moved so I really can't break the bank. This one popped up after weeks of keeping my eye on another one that was OoS and the price was too good to believe and I thought I would be sacrificing quality, but I ordered it anyhow. It shipped directly from the seller and since I was so close, it arrived in only two business days (exciting!) It's your basic particle board furniture, nothing fancy. But at the same time, the finish is really nice. Even the bottom edges of the door and sides are finished, nearly everything is really. There was enough foam in the box that all the pieces arrived intact. So as I'm unpacking it all and laying it out I'm thinking "oh great, none of these are labeled. This is going to be fun." WRONG! The ends are labeled with little stickers. So instead of marring up the finish like other manufacturers do with the stickers, the #1-15 stickers are on the edges. Which means for the most part, you can ignore them and put the furniture together. I didn't take off any really except for some on the door shelves. It went together pretty quickly. Manual was really easy to follow and could easily be done by one person (if you have a spare hand to attach the door it would be helpful but not necessary.) Pilot holes all seemed to be aligned straight. It's a little wobblier than I thought it would be, I might see if I can find a piece of white board or something to attach on the back for stability. It's not terrible though. Trying to get the screws in for the casters made a little bit of a mess as the "wood" started to shred (but only in those spots). Hopefully that area doesn't get worn down easily from use and start to crack around the holes. The shelves are generous. I got rid of a bunch of patterns before my move but with a few plastic bins, the inner shelf will be a nice storage area for the ones I kept (and buy in the future). The shelves on the door are great and had room for my oft-used notions and then some. So the bobbin holders. It's great having them on board, really; but they need some tweaking. First, a bit of wood glue in the sockets is going to be needed. As I was moving bobbins around the dowels got stuck in some and came out. Second and this is the biggest complaint - the height of the top row in relation to the front ledge of the cabinet doesn't work because you can't shut the door. 250 yard spools of Coats & Clark thread *just* fit but I had to nudge some under the ledge so the door would shut. I had to move all of my Gutermann thread to the lower row because there was no way they would slip under that ledge. So I may be drilling new holes for the top row and dropping it down. I'm ecstatic with my purchase and would definitely buy again.

As expected and better. Daughter got a sewing machine for Christmas and wanted to convert her closest into a sewing area. This desk fits perfect. Her and I put together in less than an hour.

I do like the concept of this product. Do I think it's worth $100+? No. Are there some design flaws? Absolutely. Is it cute and mostly functional? Yes. The first issue I noticed is there's a little hole on top so that when you open up the top it can stay in place with a wood peg on the door. That's fine, except for the fact that the wood peg is literally just that, a wood peg like you use to build the thing. The peg is not stable and you have to remove it every single time you close the door back up. I will probably just put a clear rubber cabinet bumper there and see if that works. Second issue is that you can't put thread spools on the top row of pegs inside the door. I used it for tiny thread spools and bobbins, so at least it's not completely wasted space. I also noticed that the wheel locks are completely useless on any surface other than carpet. Because the wheels are made from a cheap plastic, the whole thing just slides around. It does look nice. It does fit my machine. I wish it had an extra shelf though because storage is actually lacking, which is silly since that's the entire purpose of it. I plan to keep it because it's already built, but it's doubtful I will purchase from this company again.

I started sewing recently and needed a workbench but for a small area. Looking through Amazon I found this table and it seemed to have everything I needed and on budget, so I tried it and it paid off! It has enough workspace for me to work for hours on a sewing project. The shelving areas come handy while working to keep spools of thread or other necessary materials nearby. The height of the table is average, about three feet and works perfectly. It was easy to build, and it came with everything needed, including a combination Alan wrench/screwdriver. The table extension is a nice option for larger jobs because it offers a larger workspace, about 25” to 30” even with a full size machine. Once closed, the machine fits well on the shelve underneath for easy storage. The table is sturdy but I wouldn’t recommend leaning on it too much while open because it is not heavy wood and may topple if you place more weight than the unit itself. It is not much to look at, it’s a plain looking module but it’s minimalist and once closed it looks like a small dresser or end table. I would have preferred to have more drawer shelves instead of spool holders but it works well and gives the open table a nice visual touch. The small wheels help transport the table from room to room but they don’t feel super sturdy, so I suggest hauling carefully if you need to move it often. The wheels also have a break/stop option to keep them from moving. Overall the table was affordable, it looks neat, and the size is perfect for small spaces yet it offers plenty of work space. Perhaps taller people may have issues with the bottom shelve hitting their knees, but that is a standard issue with all compact seeing tables. I really like this table and highly recommend it.