6 Wheel Trolley Assembly Electric Hoist Easy Installation Roller Trolley Silent for use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel (design4)

Beefy. Used on a 1300 lbs capacity winch. I used rail from HD without issue. Buy the corresponding mounting brackets and bumper stops and you will not be disappointed. They roll freely and fit my winch perfectly. Made mounting my winch effortless. Makes my winch more functional since I can move it around to work on car, remove convertible top and even used it to lift 450 lbs toolbox hutch onto roller cabinet.

They should work great, the ball bearings roll smoothly. However I mounted the strut channel differently and made a mistake using thin fender washers, which distorted and blocked the ability to travel inside the channel. We were able to raise the new AC Air Handler up into the attic with my HF 120vac powered wench and lowered the (old heavy Air Handler) out of the attic. These handled the load well. For that load, they are overkill, but I have another use for the future and will use the proper supports (which was ordered but wasn't delivered in time).

Much better than expected!! Mounts directly to the VEVOR Electric Hoist 1760lbs, which I mounted on the garage ceiling with 1 5/8 X 1 5/8 unistrut. WAY Overkill for my intended use, but a convenient and economical alternative.

Perfect for 1-5/8" strut channel. I use these for a winch to slide along, and be supported by, the strut. They fit and roll very nicely and are heavy duty for heavy loads.

Very well-made but whoever measured it don’t know how to read a tape measure. It measures an inch and 3/8 wide not an inch and 5/8 other than that I like them.

First, because of the multiple wheels on each truck these are NOT compatible with curved or radius channel track designs. They will jamb tight in a curve. Only use these for straight track. These are really strong. Made of thick aluminum and it’s welded not bent. The wheel assembly fits perfectly in the conduit channel. I used this to hang a 440lb electric hoist in the storage loft over my shop. It’s actually much faster than I anticipated it would be. I’ve had no issues with service duty, it’s run for hours lifting boxes up & down. I retrofitted a 28ft extension ladder as a guide for a platform lift but instead of installing the hoist motor to the ladder as others have done I mounted it to the rafters. The lift is dedicated to this spot and doesn’t need to be portable so it makes sense to keep it simple.

worked great for my bridge crane

These when good, bearings work well. They roll when they gave weight on quite easily.

High quality, works well for my project. Bearings are riveted so you can’t change them but for the price it sells … i’ll just replace the assembly in a couple years if I need to.

It works great on my electric winch.

Tout est parfait, pour ce que je voulais. Merci

No issues at all with the product

Conception et alliage robustes. Compatible parfaitement avec rail Cantrust ou Hilti