VEVOR Bike Repair Stand, 4-Leg Steel Bicycle Repair Stand, 42.5"-74.8" Adjustable Height Bike Maintenance Work Stand with Magnetic Tool Tray, Foldable Bike Service Stand for Home, Shop (Max 80 Pounds)

I was pleasantly surprised by the quality and build of this bike stand. It was a snap to put together and it holds my 30 lb hybrid bike perfectly. The screw knobs tighten well enough to hold securely with just firm thumb-tight pressure; you would want to be careful about over tightening them because they are plastic knobs. The base is wide and I would have to think stable enough for almost any kind of bicycle that was a suitable weight. I purchased the 80 lb model because I wanted to assure stability even though my bicycle is less than half of that weight. I have seen reviews here that that are critical for much heavier bikes, but I don’t think I would’ve bought a stand at this price point and this weight rating if I had an e-bike that weighed more than 60 lb! but this is just my speculation. The front wheel stabilizer works well enough, although I wonder about the durability of the rubber straps that secure either end of it. The adjustable rod for the stabilizer needed to be lubricated in order to be easily adjustable; because it is not a load bearing rod and slippage is not an issue, lubrication is warranted. Obviously, you would not want to lubricate the main rods because that would weaken the grip of the screw knobs and clamps. For the cost, I think this is a very good product.

I bought this to help with maintenance at home with my mountain bike. I will say for the price it is well worth it. There is a little shake but all in all it is sturdy. You do need to be a little careful when trying to tighten the bottom bracket for the legs. All the clamps are plastic, but so far no issues with them. Once you clamp your bike down, it is a little difficult to rotate it with the weight of the bike on there. I would recommend this product for anyone not wanting to spend alot, but still get a good product.

Was able to set up the entire stand in less than 15 minutes for the 1st time out of the box. Feels solid and I like how the feet are adjustable. It is more stable and sturdy than I expected. I would have given this product a 5 star, however the box it came in was damaged and then crudely taped up. While removing my 25 pound bike from the frame clamp, a washer fell off of the adjustment bolt.

When choosing a stand, I considered a much smaller wheel stand. But for a little more, this seemed like it might be a huge upgrade. It is. This is fully functional repair stand similar to much more expensive stands in structure and function. I have a vintage cruiser bike that weighs a ton. The top bar is two curved tubes, so I was unsure whether the stand would work. However, I locked the front slanted tube in and that worked fine. It took a little doing to get the bike balanced, and it was a two-person job. But once balanced and locked in, my bike stayed rock steady in the air while I work on it for several hours. I had to do a lot of pushing and pulling because I was replacing the bearings in the bottom bracket, the chain, the crank, and the pedals. But no problems at all with the stand. It does have plastic in some places I'd like it have metal, but the plastic is tough and thick. One plastic element is a small shelf for tools and parts, with a magnet under the tray, which is nice for things like screws and washers. The stand folds into a fairly small unit, but the shelf sticks out. Taking the shelf off and putting it on would be a pain. However, you can still put the folded stand in a closet. If you work on a bike now and then and want to do it standing up, this does the job. If you work on bikes often, this stand will probably not last long. For the cost: an excellent stand. Highly recommended.

Way exceeded my expectations. Very sturdy construction. Pivot arm for seat step or frame attachment. I bought it to help take better care of my road and mountain bikes. It certainly will help with cleaning and maintaining! Highly recommend.

This an OK stand, a but heavy steel frame, said to hold 66lb bike and it does but pretty much in only 1 position. The clamp really only grabs a round bar and does not open very wide. It allows you to rotate the bike, my bike weighs approx 44 pounds, but if I rotate it the clamp is not tight enough to hold a position safely. I will add some rubber pad to the clamp for better grip, but will keep it as I'm only a weekend warrior using if only ossacionaly.

does what it's designed to do. Compact, easy to setup. Bought it for a heavy e-bike. It's sturdy and folds up to a compact size for easy storage. Adjust from a standing position to a sitting one. Great value for what it does. Stability bar works great to keep straight.

I purchased this bike stand and then exchanged it for the 2 leg aluminum model with a lever. The knobs are very difficult to tighten enough to hold the bike in place. Four legs are unnecessary and make it bulky. The tool tray is very small and immovable. Spend a little bit more and get one with a lever. You'll thank me later.

Very handy when making repairs

article parfait pour un vélo électrique très costaud et robuste

Equipamento de grande qualidade

After much deliberation I settled on this particular product and I have to say I am not disappointed. Build quality is excellent, the parts have a real quality feel to them. It goes together really easily and quickly and once built it is extremely sturdy and supports my electric hybrid bike really well. The price of this stand is very favourable compared to others of a similar spec and I am very happy with it.

Très bon pied d'atelier pour vélo. Solide et ne vibre pas pendant que je travaille sur mon vélo