Micro ATX Case PC Case: MATX Case Mini PC ITX Desktop Computer Case Support M...

looks great, added 120MM fans and still has room for 2xSata SSDs and and small video card. Zero built in cable management, going to require old school zip tieing and only one side paneled comes off What saved it, and why I gave it five stars is depending on sales, seller, and branding this case can be had between $30-$39 in multiple colors. The only valid competition at that price is open air benches, and noting at this price point in white. Nothing as clean looking in this price range. I have a full build video up.

I've been looking for a little case for my small matx based server. For this little gem and it did all I need. I would recommend setting the screws before installing the parts, the screw holes are not fully threaded.

This is a decent case for the price. You need to be aware that you are not getting a high end case with solid structure and options for wire management and storage. This is a perfect case if you are looking for a smaller case. This is my 10th computer build. I used a micro ATX board and like others shared, it barely fits. While I made it work, this would be better with a mini ATX. You can only get one 120mm fan on the front since the motherboard power plug interferes with the second spot (mATX board). The case is thin, but it works. There are no case fans, but those are cheap and easy to install. It was better to put everything in and then fit the fans around it. I installed one 120mm fan on front and one 80mm on the back. The three design issues with this are 1) The power supply mounts on the top and there is no vent for the PSU fan. For that reason, I had to mount with the fan pointing into the case (not ideal). 2) The opposite side cover is not removable which makes it more challenging to mount the CPU cooling unit 3) The mounting points for the motherboard do not extend to the mATX. Therefore the edge closest to the front does not have mounting points. This is not a huge issue but made it harder to securely plug in the motherboard power connector. Overall, very happy with the size and design. For the price, this is a good value.

This is a micro atx case, itx will not fit,despite their information, nice case but very bacis,no screws,no paperwork, but still nice if you can fit into it...

Very affordable case…which was exactly what my wife needed for office work and telehealth. All components fit perfectly and it’s small enough to hide behind her monitor. It would accommodate a GPU if necessary, but not one of the monster gaming devices.

My build is as follows - Asus TUF A520 mATX Ryzen 9 5900x 32gb Corsair vengeance ddr4 Msi 3060 12gb gpu Corsair 750m atx psu Let me tell you this motherboard was quite a squeeze to fit in. It says it’s compatible with mATx, which it is, but holy crap it’s a squeeze. If you need to change out your cooler or swap fans, you have to undo either the whole build or at least half. With one of the shortest rtx 3060 gpus you can get, like I have, you NEED to have one of the Artic slim 120mm fans in front of it. A standard thickness fan will not do. The motherboard power connector will be in the way 100% of the time. My top intake fan is a standard noctua fan but my bottom is the slim fan. Keep in mind my build was mATX not ITX. There is pretty much zero cable management built in. Zip ties and creativity. I knew what I was getting into with this case as I wanted as small a case as I could get. I can’t fault it.

I didn't mind the case for the price, but I highly reccomend reading all the 1 star reviews. I didn't do that until I had the case at home. I had a Micro ATX motherboard and it barely fits. It is a pain to assemble and fairly misleading in the pictures because if you put fans in the front of the case, they block the 14 pin power cable for the motherboard. Some reviews said they were able to fit one fan, but with the motherboard I have (B550M Pro-VDH) It won't work with either. Also the front usb cord won't plug in unless you bend the ever living crap out of the cable or motherboard. I decided not to do that, and I think I will just buy a new case. I think this case would work great for an ITX board, but I wouldn't suggest buying it unless you really know what you are doing. This is the 4th build I am doing, and first mircro atx. The case itself seems okay, it doesn't have screw holes for all the MATX board, which I thought was a little misleading. But, I paid 30$ for the thing, what more can you expect.

I bought this case to transfer internals from an old computer. There was plenty of room for the components and the cpu cooler. The fans are very quiet while running. There are not issues with overheating. It looks nice and sleek sitting on my shelf. It fit easily into the space and wasn't too heavy to move around to get just right. The cost was the main factor when I was looking for a case and this one was very affordable. Great value for the cost.

Usandola con una placa mATX, todo cabe bastante apretado. Olvídate de usar ventiladores de 25mm de grosor, incluso los de 15mm están apretados. Igual el pcb de los botones y los puertos estorba mucho para meter la placa. Con mucho cuidado y paciencia es posible.

This is a nice compact case ideally suited for the MATX motherboard. Given the motherboard has a CPU and PSU fan, as well as vents on the case, a case fan is unnecessary for everyday normal use. It comes with mounting screws attached to the cable with elastic bands.

Super small case with up to 4 drives ( not 4 hdd) OR 1 hdd + 1 ssd bottom and 2 intake fans. Look at the pictured combination in the item description. It's cheap but still well made ( mounting holes accurate and fully functionnal) The paint is super fragile. Comes pre assembled with decent mounting hardware. The only downside to this case is this : The psu takes top inside air and exhaust it on the back. Because of this, it's almost impossible to keep a positive pressure inside the case since the front air grills are so small even using 2 of them unless you run them full speed ( wich no one wants for the noises) I removed my 80mm exhaust on the back and installed it on the bottom of the left side pannel ( made bigger holes) so I'd get more intake with low fan speed. Other than this, its a great small case for this price.

This case lives up to its reputation for being cramped, so be prepared for a challenging build process. Ensure all your RAM is properly seated before installing anything else, as accessing components becomes significantly harder once everything is in place. My build includes three HDDs—two mounted at the front and one at the bottom. While I managed some basic cable management by routing harnesses between the bottom front drive and the case, it’s far from ideal. The case lacks sufficient mounting points for a micro-ATX motherboard, which caused noticeable flexing when connecting SATA cables. Installing RAM after mounting the motherboard also felt precarious, adding to the sense of compromise in the design. Mounting the bottom HDD was particularly difficult. The drive sits flush against the case floor, leaving no clearance for my PSU’s 90° SATA power connectors. After much trial and error, I found a workaround using three standoffs as spacers to raise the drive. Without this adjustment, connecting power would have been almost impossible. Additionally, the openings for PCIe expansion cards, such as GPUs, are poorly aligned with the motherboard slots. This misalignment makes installation trickier than necessary and adds to the overall frustrations of working with this case. The case also amplifies noise from my enterprise-grade HDD, especially when placed on an MDF desk, due to the rigid mounting. Despite these issues, the case has its positives. It’s solidly built and surprisingly sturdy, with a square and precise frame—qualities not always found in cases at this price point. However, the lack of space for cable management, poor airflow, and alignment issues make it less suited for those prioritizing ease of assembly and cooling efficiency.

Pro: case is really small and compact as expected. A great charm! Cons: it's a little bit tricky handling sata and power cable if a 3.5 hdd must be installed but don't let it be a problem cause it's clear that patience is needed because of the size of the box. Once everything is installed and cables are well tied wrapped to prevent touching fans you be very happy 😃 with this lovely case 🥰 !!!