Car Air Filter - Replacement Filter | Separates Particles from the Air Intake - Moisture-resistant plus High Tensile Strength

Good filter for the focus mk3 car still runs sweet no issues easy to install

It does the job and saves lots of money.Just buy and replace it yourself.

Bought for my wife’s Ford CMax 1.6 Fits perfectly Simply unscrew 4 x 7mm hex bolts from top Need long reach extension bit for screw at back Lift out old filter and pop in new Push in tight until rest of filter clicks into housing and put back 4 x screws and you’re done 5 min job and Bosch is quality car part

Good filter but a pain in the behind to install. I’m not sure if that’s down to the filter itself or just how the air box is designed (62 focus 1.6tdci) Mann filter came out of the car and fitted a Bosch one so the mann may be easier to fit but I’m not sure. But it does its job

Does the job.

No matter what your technical ability, getting the oil changed on your car is worth having done by a garage because they can dispose of the old stuff and save you the hassle. However, other service items like the air filter, cabin filter and so forth can be done at home with affordable tools and no risk on most cars, and the Focus 1.6 diesel is particularly easy to work on. You need a 7mm hex socket and a small extension - you can use a ratchet, but a screwdriver handle will do, these don't need a lot of force to remove. Undo the four screws on the air cleaner housing (the large plastic box behind the nearside (RHD) headlight) - it's on your right when facing the engine bay and bonnect open. Three are easy to see, the other is slightly obscured by wiring. Lift the edge of the air filter box up near the flexible plastic hose - you can pull gently on the screw to detach it but it's easier to push the plastic. Ease it off all around then lift straight up, and you'll see the dirty cylinder-shaped filter. The back of the filter is circular and visible with the cover in place, so you can easily mark when the filter was changed. Lift the old filter up out of the retaining groove, and away from the mounting ring on the air inlet. To install the clean filter, align it so you can see the writing if you want the part number/date to be visible, put the inlet side onto the collar/mounting ring, push gently and then guide the plastic end cap into the retaining groove on the outside edge. Put the cover back on, and do up the four retaining screws. They don't need much force and will stop turning when the cover is fixed, you don't need to overtighten them. Make sure the air box is secure (it has a mount on the inside of the wing that can move, so just push down gently on the upper right corner and make sure it doesn't wobble amount much) and you're done. Takes longer to write than to do. Just remember, 7mm socket, extension to reach the top right screw, and you'll be fine.

Great quality air filter and easy to put on

Bought this for my ford grand c max 2011, 2.0 tdci. I use to buy them direct from ford, but the fit wasn’t quite right, so thought I try this one. It fitted perfectly. I will stick with this one from now on. Cheaper and delivered next day. Very pleased.

Funkar som orginal

Impeccable

2017 Model Focus 3.5 1.6 Ti-Vct aracıma uyum sağladı. 5000kmde bir değiştirmek hem çekişi hem yakıt tüketimine olumlu etki göstermektedir.

Good quality. Installed in a Ford Focus MK2.5 1.6tdci

He instalado este filtro de aire de Bosch en mi Ford Kuga 1.5 TDCi y, como era de esperar con esta marca, el resultado es perfecto. Mis impresiones son las siguientes: Compatibilidad total: El tamaño y la forma son exactos a los del filtro original. Ha encajado en la caja de aire sin ninguna dificultad y sin dejar huecos por donde pueda entrar suciedad. Construcción robusta: El papel filtrante se ve de excelente calidad y los pliegues son uniformes. El sellado de goma es flexible pero firme, lo que asegura que todo el aire que entra al motor pase realmente por el filtro. Mejora en la respiración del motor: Tras el cambio, se nota que el motor respira mejor. Es una pieza fundamental para mantener a raya el consumo y proteger el caudalímetro y el turbo de impurezas. Relación calidad-precio: Por el precio que tiene, no merece la pena arriesgarse con marcas blancas. Tienes la garantía de Bosch por muy poco dinero. Conclusión: Una pieza de mantenimiento esencial que cumple con los estándares de fábrica. Si buscas fiabilidad y un ajuste que no te dé problemas durante el montaje, este es el filtro adecuado. Muy satisfecho.