10uF 25V 5x11mm Electrolytic Capacitor 10 UF MFD 25 Volt 0.2x0.43in Aluminum Capacitors (Pack of 15)

Worked like a charm for my piezo pickup

As described. Used to fix a old Toyota cluster and worked just fine

Quality component, especially for those building new projects or resurrecting old ones like Commodore computers.

worked great to restore my 1979 Intellivision!

Used to fix tachometer function in 1991 Toyota Celica. Slightly larger than original, but worked just fine. Might work for other Toyotas of that vintage, but I can't say for sure. Two needed for repair, so having a few extra in case of mishap isn't a bad thing. Several videos on Youtube show how to do it, if your tach is dead or dying. Seems to be a common problem.

I'm always a little leery of buying electronic parts from Amazon. I'm afraid of getting poor quality off brand junk. But sometimes you need parts faster than what Digikey or Mouser are willing to deliver, and their costs are quite high. Sometimes you just need a few parts and fast. Luckily Amazon can sometimes deliver on small quantities of parts fast and cheep. I ordered these 10uf 25volt caps. The brand of this batch sent to me was AISHI series. 10uf 25V 85degree The statistics across this lot of 15 units: Average Capacitance: 10.51uF - High 11.78uF - low 9.47uF Average ESR: 2.43 ohms - High 3.30 ohms - low 1.80 ohms So according to the statistics, these are a good batch with no failed units and all measuring in a tight tolerance range.

Tested the lot and only one was just outside of spec at 12.93uF. Most were within 10%. Good enough for prototyping/testing, imo. Couple of the leads were a bit bent, but nothing that was concerning. A couple caps were missing the negative silk screen indicator, which could be an issue if you cut the leads even and don't have a way to test for polarity.

These are 10 uF 25V polarized can capacitors. A sample tested out of the 15 that came in shown to be within 20% stated tolerance. The capacitors come in a nice little transparent storage box that also could be hanged on store or manufacturing shelving. These are polarized capacitors and the legs are about 2 mm apart. The only thing I didn't like about these particular capacitors is that the same seller sells other values of capacitors that are rated at 50V while this particular value is only rated at 25V and the size of the capacitors is about the same so there is no real reason why they couldn't have made all of the of them of the same voltage rating.

Parfait cela a permis de faire refonctionner mon four qui était en panne ! Ravie

Ditta seria. Materiale ordinato arrivato correttamente e nei tempi stabiliti

Le produits répond a la commande et délais de livraison rapide.

Excellent