VEVOR Leather Cutting Machine, 7.1 x 3.9 in Embossing Plate Manual Die Cutter, 0.47 in Pressure Stroke Leather Embossing Machine, Dual Guide Shafts Die Cut Machine for Various of Materials

Very heavy machine, works well. You need to spend a bit of time assembling it, but overall it’s not to hard. Very easy to use it afterwards

This machine more than met my expectations! It's heavy duty yet easy to operate and adjust. Smooth operation and well built. Shipped in a wooden crate and when I went to pick it up, I understood why. For this machine, the price was unbelievable. I couldn't be happier with my purchase. 🎉💯🎊

the tool is solid good quality! Because the box was slightly destroyed in shipping, for the weight of the tool, the box is weak. the two main bolts were damaged in shipping, a nut that secured the bolt to the metal plate was missing, the other nut was hit and it stripped the threads- NO BIGGIE- still a quality built tool. Solution- remove the two large bolts/anchor bolts, turn them upside down, putting the stripped threads on top, which doesn't matter having damaged treads on the top side. buy two new nuts, slice them in half with a cutting wheel (be careful, use a vice to hold the nut). Secure them on the underside of the metal base plate, tighten the two top nuts and the two main bolts are now secure. at this point your back in business!

It's big. It's heavy. It's a little dirty (but it's a machine, so that's to be expected). It also comes in a fun wooden crate. It came with one retaining bolt unfastened and the other loose, but was easy to securely attach. All parts accounted for. It includes a rather substantial wrench for adjusting the height of the plate. It appears to be set correctly out of the box so I haven't had to make adjustments yet. The action is smooth with the addition of a little bit of machine lube. I just have to wait for my custom die to come in the mail to really test it out. Great value for the cost of you don't want to drop $1600+ on a manual clicker press.

Product works fine. Took me 2 hours of assembly as the plate arrived loose but neither of the Allen wrenches given fit the slot to tighten it. Make sure you have a hammer or a powered machine to break the nuts to adjust it.

Terrible product that is completely unusable. It doesn't apply even pressure AT ALL, and it has hidden bolt holes in the plate that will damage your dies. Those those two design flaws will destroy any die you try to use with this. I wish I could return it, but the return window closed. Now I have a giant useless monstrosity that cost me a ton of money and there's nothing I can do with it.

Rock solid! This thing is great. I moved it to the basement (should have gotten help - it's heavy) and uncrated the thing, took the poly cutting pad out of the bag and put a die in it, still on the floor. Made a half dozen very easy successful cuts with no adjustments needed! It's pretty solidly built. Maybe need to replace the bearings in a decade or two, other than that - zero maintenance! Will get it moved to the work bench and leveled with some calipers this weekend.

As you can see by my pictures, the machine did not arrive in good condition. I found it on my driveway with the crate upside down. It appeared that one of the wood blocks which would’ve held it off the ground for a forklift to get under it was broken off. And the crate was barely holding together. Peeking inside the gaps, I could see that the machine was tipped upside down just floating around inside the crate. It was not secured to the crate at all. After removing it from its box and getting it right side up, I had to set about putting it all back in working order. The pillars were totally loose. One bearing was slid partially off of its journal and not seated properly. So after tightening everything up and getting it adjusted level. I was able to set it up to try and use it. The Machine in use actually works pretty good. My only complaint is that there’s not a whole lot of travel. If your die cutters are not all the same height you need to make adjustments in the height of the press plate. Not the end of the world but annoying. I gave it four stars based totally on the Machine itself and did not remove any stars because of the shipping. All in all, I’m happy with the purchase. Luckily, I was handy enough to put it all back together and get it all tightened up square and straight. Thankfully, there didn’t appear to be any permanent damage from the poor shipping.

Conforme et fait le job

Received on time, no issues with press. Quality control poor as received instructions for a steering wheel stand. Thank God for YouTube.

Die manuelle Stanze hat meine Erwartungen voll erfüllt. Sehr leichte Handhabung und Leder lässt sich damit wirklich leicht ausschneiden.

Excellent machine, well made and really well packaged. It’s delivered by a two man team who bring it into your premises. I bought this to use with my dies that I use for leather. It is exactly as described in the advert and I am extremely happy with it.

Wheels are off the groove and it's very loose. The amount of money I paid for this, I shouldn't have to tinker with it. It is very heavy however I believe I have a damaged item. I'm not happy with this this