20H Professional Graphene Ceramic Coating for Cars (70ml) - 10+ Years Protection, Hydrophobic, Scratch & UV Resistant, High Gloss Finish - Professional-Grade Car Detailing Kit - Easy Application

I tried this product on a custom black walnut live edge table I made and it turned out great I applied it over rubio monocoat very easy to use

I have been using this coating for a while and the surface still looks glossy and smooth. Water beads up nicely and dirt is easier to rinse off. Application was straightforward and the finish has held up better than expected with regular driving.

I recently purchased the 20H ceramic coating for my new carbon fiber car parts, and I couldn't be more impressed with the results. This product truly exceeded my expectations in every way. From the moment I applied the 20H ceramic coating, I noticed an immediate difference. The application process was straightforward, thanks to the clear instructions provided. The coating went on smoothly and evenly, creating a flawless finish on my carbon fiber parts. What I love most about this ceramic coating is the incredible level of protection it offers. My carbon fiber parts are now safeguarded against scratches, UV damage, and other environmental factors. After several weeks of use, they still look as pristine as the day I installed them. The high gloss finish enhances the natural beauty of the carbon fiber, giving my car a sleek, showroom-quality shine. Another major benefit is how easy it is to clean my car now. Dirt and grime simply don't stick to the surface as they used to. A quick rinse and wipe, and my car looks immaculate again. This product has truly saved me time and effort in maintaining my vehicle's appearance. Overall, I highly recommend the 20H ceramic coating to anyone looking to protect and enhance their car's carbon fiber parts. It's a top-notch product that delivers on its promises, providing unbeatable protection and an incredible shine. I'll definitely be using this ceramic coating on all my future car projects!

I was pleased with the ease that it applied. The 70mL bottle was just barely enough to do a F150 short bed, crew cab. Glad I didn't switch applicators, because it wouldn't have been enough. Time will tell as far as longevity, but the truck looks great and surface feels slick and new. Not a fan of the plug seal inside the cap - it was difficult to open with gloves on and made dispensing drops a bit more challenging - you kinda have to tap the bottle end on the applicator. The sponge block delaminated during use - not unexpected, just have to make sure the applicator sheet holds it on there. Polishing towels were perfect for buffing. If the finish fails prematurely, I'll return to edit the review, but overall this seems like a good ceramic coating - would recommend.

Have used this product for years. Outstanding shine and durability, lasts a full year before boost. I put this on my 2019 Subaru when new, and it still shines like day 1, even the textured parts are like new. Very easy, forgiving application. Also works on black textured plastic and side glasses.

I decided to try this on a brand new set of wheels and it really gave them a nice (POP / Shine) I am interested to see how it holds up (long term) against road debris, and staying clean. As well as what the future difficulty will be to wash off brake dust and debris. Would Definitely BUY AGAIN* After over 500+ Miles and examining my wheels. The ceramic coating truly does help keep them clean. Photo after a 500mile drive. No car wash.

Bought this to try, see what all the hype was about. I had enough to do two cars, a trunk lid and had a bit to spare. Started with the Mustang, then did the top surfaces of the Cadillac, I was not sure id have enough. Well I did but performed the sides, front and back at a later date. Prep is key folks, I cleaned the car using a mild soap to remove any wax. I then clay barred the whole car and for only the mustang I used a polisher and orbital to further prep as it was pretty neglected. I skipped the polish and orbital for the Cadillac. Plan for enough time! I did one car a day. Now its time for the Ceramic Coating, i did one car with the provided pad and clothes. While it worked well its was a bit clumsy. So on the second one i used Adam's suede applicator pads which i bought at the same time. I have to say the Adams pads are superior and quicker. Spend the extra and get them as others have recommended. What I cannot comment on is longevity, im only a few weeks in. Make sure you use PH neutral car soap moving onward to ensure you protect the coating. I did notice subsequent car washes were easier and water beads up like magic. I am in west central Florida and do hope that the sun/salt air does not destroy it over time. ill report back. As a fun experiment i did my older car trunk lid in this stuff and the rest of the car using Adams spray ceramic sealant and I got a free bottle at a car show. I'm curious to see how that one will hold up over time to see if this stuff truly is better!! More to come :)

I was pretty excited to try this product as the reviews were encouraging. It took me approximately 2 weeks prepping the paint on my Lexus gx460 because I wanted the final product to be perfect. I clay bared the entire car, lightly buffed with a da buffer, then hand buffed it, then cleansed with isopropyl alcohol then with Adam’s wax remover then went over and corrected all the paint chips followed my more buffing and more alcohol and more Adam’s surface prep to finally get to the ceramic application. The perfect cloudy cool day I applied as instructed and thought this stuff is great. Two weeks have gone by and after a rain the car was all water spotted. Today it was covered with pollen so I rinsed to off thinking nothing would stick to this product but to my demise the pollen just stayed on it. I ended up having to wipe it down and in doing so noticed that there was nothing between the cloth and the paint. It was like I never applied a ceramic coating at all. So disappointed I had to write this review. Don’t waste your money on this junk. The water beads creating horrible water spots that then etch into the paint when the sun comes out. Do yourself a big favor and chose something else

Positives: 1. Great water repellent 2. Great for windows both inside and outside Negative: 1. Overpriced 2. The protection wear away quickly 3. Limited scratch protection 4. Susceptible to dirt stain especially after rain Applied this on my car about 1 month ago. Applied Turtle Wax Hybrid Solution at the same time on my other car. Turtle wax performed a lot better, the coating feels much thicker, shine is better, and it is lasting more than Dronar coating. I washed the cars at the same time and all you need with Turtle Wax is the snow foam and pressure wash to remove dirt. The car with Dronar however had some stubburn stains that I ended up polishing them out. I ended up applying Turtle wax Hybrid Solution on my DRONAR coating just after 1 month. The price of Dronar is 5 times the Turtle Wax Hybrid solution and the performance is much less.