MTRAY-BLK

A great drawer and platform for your coffee machine to set on, or other place at your coffee station! Only complaint is the ties used to secure the drawer for shipping were twisted in a weird way and very difficult to unwrap and remove. To prevent theft I suppose? Idk. I've never seen regular coated wire twist-ties twisted in that way before. Not a deal killer by far, but weird all the same. The corner supports the feet are mounted too were bent "slightly" upward, but the rubber-like foot pads articulate somewhat so leveling was not a problem and the setup didn't interfere with the drawer action. Just be aware and look there if something stops the drawer from coming out. I couldn't bend them back in place with my strong fingers, so they're pretty supportive and solid as they are. No concern unless they block the drawer, otherwise leave 'em as is. The platform drawer holds the stated amount of pods and although there's no handle/knob as a drawer pull, the gap at the top of the drawer is more than sufficient to pull it out unless you have huge hands like Magilla the Gorilla... lol. As long as you have the space overhead to accommodate the platform it's a nice addition. I replaced an older K-pod holder that is vertical and swivels that is nice, but took up to much counter space and was off purple that matched a limited production Keurig coffee machine Keurig that is long out of production. This organizer does the job nicely, takes less space than other systems, and could actually be used inside the door on an overhead cupboards bottom shelf if desired! A nice addition IMO. Seller also offers the same in a stackable double version if you need the added storage for a busy coffee station. A great space saver. Enjoy!

Purchased to hold the massive amounts of kcups. Coffee pot sits beautifully on top.

I bought a drawer quite a few years ago for my k-cup pods. At that time, there weren't very many choices. Mine just happened to have a top made of a heavy duty cardboard type material. Since water & coffee are both spilled every so often, the top has started to look pretty ragged because it doesn't wipe cleanly. I also wanted something with a metal top. The point of the drawer is to give the look of less clutter on my counter so I didn't want a transparent top. The first model I bought a few days ago turned out not to have a bottom on the drawer! Apparently, some models have the k-cups hanging. This is fine if you're using the traditional k-cups I suppose, but I use the smaller compostable San Francisco Bay pods. They cannot hang from this type of model design. I really had a hard time finding a model that had the slick, metal top for wiping cleanly. (Some models have a top with grooves, for traction, but I figure those grooves become hard to keep clean.) I found this model for a more affordable price than most. Also, I bought an open-box model so I saved a chunk of money off the retail price. I set it up today. There are complaints that there is no handle to pull the drawer. This is true, but I've found the dip in the front of the drawer to be pretty substantial that you can use your fingers fairly easily. I will admit that the drawer doesn't pull out smoothly, like a drawer should. It fits in there, but doesn't glide out like a drawer. Due to the cheap price I paid & the fact that I can easily wipe the top clean, a smooth drawer-pull doesn't bother me. It pulls out with zero effort. Although, upon opening, there were 2 small twist ties keeping the drawer closed. And I had a hard time opening the drawer upon first inspection, as if it was stuck....because those twist ties were holding it closed. Ooops! Once those were removed, the drawer pulled out without issue. At this time, I give this item 5 stars for excellent affordability (especially if you buy one with a damaged box) and for cleanliness.

It's functional, it definitely does the job, and I love how the lattice design looks. I noticed there's no way to really grab it but a handy crafting drawer dig can fix that. I'm going to go look for a tiny knob at the store (when I'm allowed to shop for non-essentials anyway) and get a small silver knob but it's not been a bother to just grab the lip yet, even for my elderly father. Just lift up a little so it's not fighting you. The reason I took one star is because of the feet. They have NOT been attached properly since I pulled it out of the box and though I tried to re-stick them I will have to try to super glue them, but even so, when I glide them back and forth on my counter, as it's under overhead cabinets, it won't open under there so we have to pull it out to open and close the top. When we do this, it leaves runner skids from the feet. Amazon's photo button isn't showing up for me lately or I'd post a picture of my counter but it was definitely hard to clean up. So I may find new feet altogether, but it's not worth returning as I do like it and it's an easy fix. Sometimes we get too picky and forget that we can fix the item ourselves how we want it, instead of taking yet another chance on another item. Happy overall with it.

It works well. It is just a tad bit taller than the one we have had since 2017. The only downside is that it is a bit harder to pull the drawer out than our older one because it doesn't have a cut out there is only a thin metal piece that if your fumbling in the dark it's hard to find so I just end up reaching around the back and pushing it out from the back. BUT it's still worth the money it holds a ton of coffee pods and looks nice. I like the design on the side a lot more than the older one. Over all it has a nice weight to it and it is sturdy my espresso machine doesn't move at all while sitting on top of it and is a perfect height. I recommend 100%.

I really like how I can just put the machine on top of it - great for space! Holds lots of pods too. Very easy to put it together and start using. The color is great too! It’s from metal, so very sturdy

Beautiful and helpful, space saving!!

Decent product! The fit of the cups was okay they are not steady and get stuck in when you open and close the drawer. Color was great. However, it was damaged :(

I like this drawer for beneath my coffee machine but the tracks are slightly off and not every capsule fits.

This Mind Reader Coffee Pod Draw has to be one of the best purchases I've made (apart from my coffee machine!). It fits the LavAzza A Modo Mio coffee pods perfectly, and it doesn't take up all that much bench space! I would 100% recommend for anyone with a unique coffee pod size!

Excelente, queda perfecto bajo mi Ninja Dual Brew Pro, y se ve muy bien

Finde die doppelte Schublade echt klasse. So hat man einen guten Überblick über eine große Auswahl an Sorten. Alles platzsparend und gut weg sortiert.

Nice and sturdy. Did not think it would be strong enough to hold the coffee maker on top but it does. Great way to keep pods organized!