Portable Drill Winch of 1000 Lbs, Red Handheld Drill Winch with 40 Foot Synthetic Rope, Rotate The Hook 360 Degrees, for Lifting & Dragging(Red)

Works well, used for getting the camper in the garage with very little effort. Would be lost without it.

This winch allowed me to load and unload a tool box weighing about 600 lbs onto a utility trailer with no other assistance. I would recommend it.

Easy to be use and work very well!Use it to pull your Kayak to Truck or SUV.

I have used this winch 6 times since buying it. I have used it to pull golf carts in trucks & trailers. That being said it had no problems because the carts were able to roll. Works great. Since it doesn't have provisions to keep the cable straight, I'm glad I bought the synthetic rope and not metal cable. Very handy to have

I bought this to haul up sheets of 3/4" plywood on a roof I'm building, it's working great, plenty of length on the rope, works easily with my 20v drill. The shaft you connect your drill to is hex shaped, so you don't have to worry about it slipping. It came with two sets of straps that have metal buckles on them for connecting the winch to whatever you're pulling. Seems tough enough, I've never used a winch with the poly rope before but I like it. I'd say it's a great value for the money.

I use it to skid trees. My property is thickly wooded, mostly with oak trees. Some more than 20" across. For those that haven't dealt with oak, they're way heavier than they look. I use this winch and chain to skid trees when pulling with the old Ford Ranger won't do. I've hauled whole trees through some really thick and gnarly terrain with this winch. It punches way above its price. The synthetic rope is easier to handle than steel cable. No nasty metal frayed cable eating up your hands. Much lighter, too. As for down sides, it's slow. You'll want a fast drill and big battery. Any good drill will do, but something that runs above 2000 rpm and has a low and high mode works best. I started with a 1400 rpm drill. Switching up to 2100 rpm was a huge improvement! I wish the clutch pull used a large T handle instead of the smallish round button so it's easier to manipulate with gloves on. I also wish the line length was longer; 50 feet would be great; 100 feet would be amazing! But I've made the 40 ft work for me. I'm very pleased with my purchase.

This little guy has blown me away. I live on an 8 acres lake and had a number of tree clearing projects. I had been using an electric plug in winch and a truck with snatch blocks and tree rigging ropes to move large amounts of material. But many areas i can access either power or the truck.A 20 volt drill and this little winch have been very easy to carry into areas. It has performed at high speeds too. (Maybe it will eventually burn up?)

I have used this to aid in removing over 50 trees. Super product

Aktuell gibt es auf dem deutschen/europäischen Markt diese Winde zwar auch von verschiedensten Anbietern zu kaufen. Jedoch ist diese Winde im Gegensatz zu den hier erhältlichen Bohrwinden mit einem synthetischen Seil statt eines Stahlseils ausgestattet. Auch die ausgewiesene Zugkraft ist bei der hier beschriebenen Winde höher als bei den Winden mit Stahlseil.Die Winde macht einen wertigen und soliden Eindruck. Sie ist eine gute Alternative zu den "en masse" vorhandenen 12 V-Autobatterie Winden mit teils china-typischen absurd hohen Last und Zug Angaben die weit von der Realität entfernt erscheinen.Die Winde braucht einen, meiner Meinung nach, soliden und wertigen Akku Bohrschrauber mit sehr gutem Drehmoment. Ich habe einen Makita DDF 482 benutzt und bin aber mittlerweile bei dem deutlich höherwertigen Makita DDF 489 gelandet.Die Winde ist durch die enorme portabiliät sehr flexibel einsetzbar. Im Wald nutze ich sie um Bäume mit Überhang beim fällen in die richtige Richtung abzulenken und leichtere Stämme aus einem Hang zu ziehen.Ein festgefahrenes Fahrzeug müsste sich vermutlich auch aus dieser Situation befreien lassen.Nachteilig ist, dass man sehr nah an der Winde arbeitet. Sollte das Seil einmal reißen, so wäre eine Verletzungsgefahr durch den Peitscheneffekt sehr hoch.Für europäische Nutzer ist zu beachten das der Drehbolzen mit einem absurden Bitmaß von 5/16 Zoll betrieben wird. Bei uns sind 1/4 Zoll der Standard. Entsprechende Bithalter gibt es aber von Bosch oder Hazet zu bestellen und kosten noch einmal zwischen 6-12 Euro.

Works quite well, not sure how long it will last but works well enough.

My husband is very happy with this drill winch. He has used it a number of times and has found it to be very useful.

Acheter pour la chasse fais très bien l'ouvrage

Tut was es soll