SHARDEN 49-Piece Screwdriver Kit

I bought this because it seems like every Chinese keyboard manufacturer is using these tiny hex head screws to hold their keyboards together and it was driving me nuts trying to use the really budget toolset I had lying around (purchased from aliexpress, and honestly kind of trash) to get the screws out. I picked up the 60-pc set for like $12, which is still VERY budget-friendly, and this thing has been an absolute staple for me. I've already used it literally dozens of times, and it's been incredibly solid. The variety of bits is wonderful for really obscure sizes of screws. The magnetic head makes working with tiny screws really easy because it holds onto them incredibly well, and then you can drop them onto the included magnetic mat to ensure that they don't roll away from you. Mine also came with a couple additional long plastic "sticks" for lack of a better descriptor (but they aren't shown in the listing, so I'm not sure if they come with every set or if it was a mistake), that seem like they're meant to help pry into things or open plastic cases. I've found these to be the PERFECT tools for wedging off keyboard keycaps - worlds better than the ubiquitous wire keycap removers that tend to leave dents in the sides of keycaps if you're not careful or if the switch stems are so fat that the keycaps are difficult to remove. I've been using them exclusively to remove my keycaps and they haven't put a dent or divot in a single cap because the pressure is spread out over a larger surface area. That larger surface area also helps to get the caps off more easily and with less force and more control.But back to this toolkit - it's a killer value. I originally considered getting a battery powered unit for the sake of speed and ease of use, but my concern was that I was going to strip a screw and then I would be...well, screwed, so for me, a manual tool ensured that I had the utmost control over torque. The top of the screwdriver has a part that spins around, but doesn't come off and I was baffled by this at first, but have since come to discover that it's clutch when wanting to hold the stem steady while still being able to turn the screwdriver. The bits of this set seem nicely hardened and don't feel like applying pressure to them will dent or deform any with sharper, more precise contours. The case is decent, but it would've been nice if there would have been someplace for the magnetic mat to fit inside (or attach outside, for that matter) to help keep the whole set together better.My one and only gripe about this is that the collar/ferrule just above the bit is a poorly finished piece of metal and it scratched one of my spray-coated keyboard cases when I was turning it while making contact with the case. I didn't even realize it was touching until I looked at the case and saw paint was missing. I've since wrapped the collar in a thin piece of painter's tape to prevent this from happening again, but it would be nice if they would rubberize or vinyl dip that part.And not a gripe, but a wish: it would be lovely if the bits were several mm taller/longer to add additional clearance for more recessed screw holes. I've had a couple wedge-on-box keyboards that are a bit taller, and a slightly longer bit would have been nice, although the existing length still worked.All in all, this has to be one of the best budget precision screwdriver sets out there. I already feel like I've gotten my money's worth, and I think I'll have it for years to come.

It’s a great tiny guy!

This is a surprisingly nice set. Got as a gift for someone who works on old gaming systems, he loves it. Sturdy and good quality.

This screwdriver set comes in a textured black plastic case with a cover that is easy to slide off. The white printed logo helps you remember which direction to slide. The bit holder is metal and feels good. The rotating “palm end” is handy. The selection of bits is healthy and the smallest Philips is super tiny. The bits fit into the metal holder with a good snap and are not too tough to remove. The bits are held in the case with magnets that are just the right amount of force. You can easily pop your target bit out with a single finder. The bit holder, however, is very tough to get out. There isn’t much room to get your finger in there to pry it out since the plastic claw holding it in place is too tight. I widened the claw a little that that helps. My one complaint is they didn’t make the holder compartment long enough to store the holder while it is holding a bit. I like to leave a commonly-used bit in the tool which saves me a step next time I reach for the kit. I might drill a hole in the top of the compartment to give me that few extra mm to do that. Overall a decent, compact and slim kit and a good value for the price.

Nothing but good things to say about this set. Lots of bits to slot in, the screwdriver itself feels good in the hand, and the overall quality of the whole set is awesome.

Great quality! Well organized inside a small container that’s easy to use/open and shut. magnets on each bit to hold it to its place inside the container! Each bit has magnets for precision. You’ll find no better value for your money as these S2. It’s WILL NOT SHRED like those cheap temu sets.

Great item perfect

The Sharden 153 in 1 Precision Screwdriver Set has everything you may need and more if you are looking for a great quality product to help with repairing a wide range of electronics or toys. This set comes with 124 screwdriver bits with 12 screwdriver sleeve's for 28mm and has 4 screwdriver bits that are 45mm. This Item has 4 opening picks, 1 magnetizer/demagnetizer, 1 suction cup, 2 plastic pry tools, a 1/4th" to 4mm adapter, a flexible exitron shaft, and a set of tweezers. The box say's 153 in 1 but all the documentation inside says 152 in 1 but this is because the box is counting the magnetic mat and the documentation inside is not. My favorite part about this product ahs to be the 4mm driver handle. Although the handle is made of plastic it does not feel cheep like other driver handles i have used before. The driver hands 1/4th" to 4mm adapter works great all you need to do is pull the textured end towards the base and you are able to extend the adapter. The next best thing about this set is it has multiple Torx Security bits which is exactly what i needed to remove the fan on my PS5 when I was cleaning it. I've also needed the Torx Security bits when repairing a friends Xbox controller. I would highly recommend this product for beginners who are looking for a high quality precision screwdriver set that will not break the bank.