Eris 4.5BT (Pair)

Eris Accent BT 4" Wood Grain (connected via USB): These are VERY nice monitors. I always prefer monitors for my office computer speakers for the flat, uncolored response, and that is what these deliver. These replaced a pair of Mackie bookshelf monitors that gave up the ghost on the left/passive channel. There is a beautiful level of presence, detail and clarity in both vocals and individual instruments on the Eris Accents that makes it feel like I'm listening to certain songs for the first time. Very nice, and considerably better than the Mackie's. Low end is solid all the way down to where it naturally cuts based on the driver dimensions and port resonance. Of course, the rest of the low end below this point is attenuated. Will eventually make this setup a 2.1 by adding the PreSonus 8" Sub to fill out the low end. In the meantime, I added +3db on the low end eq on the speaker which helps a bit but want to get back to that uncolored sound across the full spectrum. There is plenty of volume for my home office. Set my Windows volume to 50% then dialed in the mid-level of loudness that I desired via the speaker remote (remote is line of sight only), and this results in plenty of volume control via Windows alone. Connectivity options abound. Besides USB as my main source, I'll route my Echo out to the 3.5mm port, and connect my phone on BT. This amp is really clean through the USB connection, with absolute silence between tracks on Amazon Audio using the Ultra HD quality setting. This is another area in which the Mackies lacked. Overall very good monitors at a reasonable price. Highly recommended.

Bought these to replace my failing 10 year old Bose Companions. I was really sad when my Bose went out butt these speakers are amazing for the price. They sound better than the Bose but 3x louder and more base. You can’t beat the price for the performance provided, all the jacks, the build quality, physical tone knobs, and its nice to buy from an American company that is focused on quality instead of stupid LEDs and useless features.

Amazing sound! Really affordable, perfect for my home studio. Works great and they look good on my set-up.

(this is a review of the PreSonus Eris E3.5 model) Good: - Sound is neutral - Very accurate sound stage - The 'acoustic tuning' it's called allows you to adjust for environment - aux in on front - professional look that isn't flashy and full of leds trying to call attention to itself. Cons: - Cables you get are pretty mediocre - Cabinet build quality feels cheap A quick background. While I'm no audio engineer and I wouldn't classify myself as an audiophile I do have several headphones in the $100-$300 range and a headphone amp and dac. I was looking to upgrade my 15 year old set of pc speakers that work but I knew I could get better. Sound wise these are called "Multimedia Studio Monitors" and by that definition these are really accurate. I also primarily have headphones with a flat response curve so these very much sound like headphones in that regard. They do have bass but it's not going to rock the place. I'm going to skip getting in to details on audio since other reviewers have done a great job already and I agree with all of them. But if you are looking for accurate speakers for a computer just get these and you’ll be happy. I would not recommend them for a television or something where you are trying to fill an entire room with sound. The rest of this review is for people that do buy them and it’s their first pair of “studio monitors”. First off while they seemed to use excellent components for the monitors the cables they give you are pretty mediocre. I included a picture of what's included (power cable is already plugged in and not pictured). The speaker wire that goes between the two speakers is about 6 feet and almost look like 18 AWG wire. I ended up buying 14 AWG wire but knowing what I know now I'd have just got 16 AWG and it would be a little easier to work with. I then connected them to pc using an 1/8" to RCA jacks. The cable they give you is around 5 feet and my computer was further away so had to buy a new cable for that. Any of the 1/8" to RCA should work fine. The power cable is a standard IEC7 non polarized connector and was maybe around 6 feet. Some setup tips. First off the full manual is not included but can be obtained from presonus.com and searching for eris e3.5 and going to downloads. This explains far more about placement and adjustment than the quick start that's included or even what I say here. The manual explains the details but the volume on the monitor should be around the 11 o'clock to 12 o'clock position in most situations. Once you set that don't touch the volume control on monitor, adjust the audio from the source. With the monitors set to 11 o’clock the signal coming from the computer was too hot (too loud). I would have only been able to turn the volume up to 10% and it was really loud. RCA attentuators will reduce the volume by a certain amount just before entering monitors. Oddly amazon doesn't have them, or they were really overpriced. Search online for "Harrison Labs 12 dB RCA Line Level Attenuator" and it should be in the $30-$40 range as of March 2018. This allowed me to have a greater working range on volume. I now typically listen at around 40% level on computer but occasionally turn it up or lower it. One last thing I bought were Wellcn 26 Pcs Ferrite Cores - EMI RFI Noise Filter Clip for 3mm/ 5mm/ 7mm/ 9mm/ 13mm Diameter-Black . Place those on the power and RCA cables a couple inches before they connect to monitor. I got some occasional crackling sounds and those removed it. I also put one on the aux cable I use to connect my work laptop to these when working from home. It's not needed on the speaker cable going between the monitors but also won't really hurt anything. **See update below on how I've changed this** From where you are normally positioned there should be an equilateral triangle between you, the two monitors, and the space between the monitors. Meaning if you're head is 3 feet from front of monitor they should also be 3 feet apart and then be turned to face you. If done right you won't see the sides of monitors. You want your ear to be lined up with the small tweeters. Because mine are mounted on a wall a little high I have them tilted down and also on their side, which these monitors support. If you do this make sure to mirror the monitors. Meaning have the tweeters on the outside to get a larger sound stage. Once this is all setup don't touch the equalizer or "acoustic tuning" as they call it. Just listen to music for a few days to get used to them. There also may be a little bit of break in needed. Only after a few days should you make small adjustments to the acoustic tuning options. It's preferable to turn down a setting than boost it. If you’ve edited photos you may have noticed trying to boost the brightness on a dark image looks worse than darkening a bright image. Same idea here. So if it sounds to tinny or harsh you want to turn down the highs slightly. This reduces the highs and thus the lows will be more prominent. Initially it sounded tinny but after a couple days it either went away or I got used to it I haven't had to touch mine. One last thing I'd recommend. Since these are fairly portable, but all my wires are routed around desk I don't want to undo them if I decide to take monitors with me somewhere. I bought me an extra power cable and then use the 1/8" to rca cable and speaker cable they give you and put in a small ziplock bag. Now all I have to do is disconnect everything from monitors, grab my ziplock bag of stuff and I'm ready to go. I know that was a lot of information but I hope you found this information helpful and enjoy these. (update: December 2018) So far these have been holding up well and have had no issues. In fact considering buying a second pair to have over by my workbench. Since writing above I changed my setup so now I have a Maker Hart Loop Mixer < https://www.amazon.com/dp/B01M68UK38 > that I connect my computers and to and then audio goes from there to PreSonus. It lets me adjust levels and I still have some inputs open so I've done things like be on a conference call but also have music playing while I'm waiting for them to start. I also got rid of the RCA Line Level Attentuators. May buy more but only -3 or -6db as the loop mixer doesn't get as loud.

It works well with the drumset.

Crystal clear audio across low mids and highs, base is good also without subwoofer.

Great product! While it worked.. It lasted a few weeks and then one day after a power outage the day before the LED stopped turning blue and no more output..

Una calidad impresionante, el sonido increíble, use el cable rca y genera un poco de interferencia de ruido blanco, por lo que recomiendo que compren uno de mejor calidad, de ahí en fuera son de una calidad increíble y suenan de maravilla

Trust me, I spent way more than i should on speakers. I am no musician, I am just an average joe who wants a decent speaker for my PC. My Bose companion 2 failed after 11 months of use. My Creative T100 have popping noise issue My Logitech Z625 has wayyy too much bass. I finally found the speaker I've been looking for. - Delivery is fast, received them within a week. Having something sent from UK then to the US and finally to Sydney Australia is just amazing. - Sound quality is great, decent clarity with enough bass. little to zero background noise - Came in brand new with no sign of wear. They look cool too with that mat finish black coating, which is pretty much scratch proof. - The cone is well made, it feels like those cone you would see on a $300 speaker. My only concern now is how long this speaker will last, and if I had to be very picky. my only complaint is that this speaker came with UK adapter, not the US adapter advertised in the photo. (this is hardly a problem to me)