SONGMICS Clothes Rack with Wheels, Heavy-Duty Garment Rack with Extendable Hanging Rod, 286.6 lb Load Capacity, 17.7 x (43.3-59.1) x 64.1 Inches, Chrome-Plated, Matte Black UHSR011B01

I ordered two of these racks and am surprised at how sturdy they are and how easy they are to put together. Note: The threaded bolts and Allen bar are in the plastic bag. Check the bottom of the boxes with the wheels for the wrench. Putting this together is very quick and easy. I put it together for the first time in under 10 minutes. You do not need any other tools. I recommend the following steps if one person is putting it together. Note: The instructions are very easy to follow. One Person Installation **Put the wheels on LAST ** (1) Go to Assembly Step 2 - Get the 2 Poles Shaped like the letter C (Part A) and the 2 poles shaped like the letter L (Part B). Get the Allen Bar and 4 threaded bolts. Put the L Shaped pole on an elevated flat surface and overhang the short part so it lays flat with the holes facing up. (I did this on our bed as it is going into a bedroom. Guys, Make sure your wife is not home if doing it this way!) Take the Pole shaped like a C and put the bracket over L shaped pole so the holes line up. (Make sure the C is facing down or away from the long side of the L pole). Secure the bracket with the threaded bolts and tighten with the Allen bar. Do this for both sections and then stand the brackets up on their own. (2) Go to Assembly Step 4. Get the two long poles, Part D of equal size. These poles have a thicker and thinner side with a button on both sides. Put the skinny side down and insert into the top of the L Shaped pole from the prior step. Press the button to get the bar to insert. The button will pop out of the hole further down the pole with a "Click". Make sure the button is all of the way out. Do this for both sides. The brackets are still standing but just longer! (3) Go to Assembly Step 3. Place the brackets so the L Shapes are facing each other several feet apart. Install the bottom pole (Part C – Remaining pole with two buttons) with the button facing down. Again, the button must be pressed in to insert the pole. Wait to hear the "Click" to make sure it is locked. I had to wiggle this a little to hear the “Click” (4) Go to Assembly Step 5. Install the Top Pole. Be careful, if the pole is tilted, the top extension pieces will extend out and may hit something. Line up the pole on both sides evenly and push down until both sides rest on the button. Push in the button on one side and push the pole down a little so the button stays pushed in. Go to the other side and do the same. Then push the entire bar down evenly. Listen for the “Click” to make sure the buttons are locked. I had to wiggle this piece a little as well to get both sides to “Click”. (5) Install the wheels. I laid this across an elevated flat (Bed) surface so I could access the base and install the wheels easily. Make sure the two locking wheels are on the same side. Put the threaded part of the wheels into the hole on the bottom of the Legs or C Shaped Pole. You can use the wrench to tighten the threads but it is easier if you just spin the flat metal part with your hand. Then, you only need the wrench to tighten the wheels but I did not need it at all. (6) Put the entire assembly down as it is ready to use. This was very easy to put together. It took more time to write this review! Again, very sturdy and very well built.

One of the best racks I’ve purchased. It took less than 30 minutes to assemble and that includes opening box and confirming all parts were accounted for . Love it!!!

This is a nice sturdy garment rack. The assembly instructions are in line drawings so you need to look carefully at the subtle differences in the parts. I often purchase items which need assembly. This item was simple to put together, all parts were included in the carton also the two little tools. After assembly this rack could be easily transported in your car by sliding apart the vertical side supports and sliding apart the upper and lower crossbars (The tools were used only to attach the wheels and the side uprights to the wheel base. You don't need to take those off.) I think a rolling garment rack is handy to have in the house: can be used for storing seasonal clothes, sorting out clothes from closets, rolling outside for selling clothes at a yard sale, or using it for a party so guests don't have to throw coats on a bed. I am very happy with this purchase. It is sturdy, rolls easily and I think it is a good value.

Wheels are cheap ones, but they work fine. My main concern is that the rack itself would be strong enough to support a full load and it does that well. It was very quick to put together and seems sufficiently well-made to last. It's a little shorter than I would ideally like but for me it's not a primary rack so it is long enough to hold a good amount of clothes. I'd buy it again simply because it doesn't wobble (like the more expensive one I bought and returned from a big box store). Happy with the purchase!

I really liked this product. To be honest, I was skeptical at first about whether it cold actually support my weight, but surprisingly it held up just fine. I loved it!

Very satisfied with the fast delivery, ease of assembly, and quality of this product. When assembling this product, each piece has a nice sturdy feel to it. It comes with the two simple tools that are necessary for assembly, as well as all of the hardware. ** Just keep in mind the fact that once the rack is fully assembled and loaded with everything that you want to hang on it, the best procedure for moving it is to unlock the wheels and move it in an ' endways ' direction rather than pulling or pushing the rack while you are ' facing ' the items that you placed on it. This should greatly minimize any risk of tipping it over when moving it. ** If, for some reason, you have to move it in a ' sideways ' direction, hold onto the two vertical end poles at their ' midway point ' rather than pulling or pushing the rack by the top ' cross bar ', which could cause it to become ' top heavy ' and tip over sideways !!

strong and have not had the problem I have had with others slipping as this one is welded at the top would buy again.

Love strong material fast delivered

رائع رائع

Me ha encantado este perchero, o burro para cargar ropa! Esta increíble, súper fácil de armar y muy resistente!!

Really solid rack. I bought it expecting something basic, but it’s actually pretty sturdy and holds a lot more weight than I thought. Doesn’t wobble around once it’s loaded up. The extendable rod is a nice touch—gives you extra space when you need it, especially for bulkier items. Wheels roll smoothly and lock in place, so it’s easy to move but stays put when you want it to. Assembly was straightforward too. Took maybe 15–20 minutes.

The product is really good!

De excelente calidad, tiene un excelente tamaño y es resistente