Siraya Tech Fast ABS-Like 3D Printer Resin, High Precision, Non-Brittle - Low Odor 405nm UV-Curing Photopolymer for 8K LCD/DLP Printing (Navy Grey, 2kg)

Same print settings consistently fail with other resins - and of all the "ABS-like" resins, this is the one that comes closest to filling that promise. It's far less brittle than just about all its competition. It also cleans very well in IPA. Odour is there - but lower than most of the others. So - by far the easiest to print with, best quality results on successful prints, low odour, and only costs 30% more than other resins - which makes it definitely better value when you offset that premium against failed prints from other resins. [EDIT] pigment version makes a really big difference - white is a bit problematic as it suffers a lot of bleed though on the support side - seemingly due to low pigment levels. It's possible this is be due to pigment settling out, but I always shake the bottle a lot before use, so when using White I end up adding extra pigment Navy blue on the other hand is very heavily pigmented - and the pigment definitely does settle out, although is easy enough to stir back in. The extra pigment means that all details are beautifully crisp, even on the support side - it also means the cure times need to be at least 50% higher

Head and shoulders above Elegoo resins on my ageing Mars. Little smell, no print failures, less damage when removing supports, cures much faster. This stuff is amazing.

Used elegoo resin for a while and didnt think I could do much better. After dialing the exposure i have been constantly surprised by both their white and Navy Grey. The white can be a little translucent, but it prints fast and sharp. Navy grey is probably the single best resin i have used. Yes the pigment will fall out of suspension, but the resin holds detail, doesn't warp and sands amazingly well. Just take some time to stir the vat and it will be good to go. The small extra in cost for this brand is worth every penny.

After trying a few other resins I honestly can never go back. Sirya tech fast has half the oudur which is great for a not fully sealed printing room. The quality and strength is unmatched with even thin bits of models being strong but not too brittle. And faliure rate by far the best feature for me is very low compared to other resins. Its not quite as fast as advertised but it still lets you reduce exposure about 40% on average. The cost is also only slightly higher then the competition. Easy to work with Great quality prints Low smell Low faliure rate Fast prints I wont be buying a diffrent resin for mini printing unless somthing new and incredible is realesed.

Old gears in my fishing reel are wearing out. Have to draw the gear myself and print it. The surface is very smooth and low friction, no deforms or wearing off after intense use.

Fantastic resin at a third of the cost of my usual brand, runs beautifully on my phrozen shuffle and shuffle xl at 9 seconds per layer (less than the curing time sheet says for these printers) I am running this resin for my business as I know I can rely on it. Very low-viscosity which makes cleaning easy too!

Bought for my son, who is only using this in his 3D printer now. He’s very pleased with the results and has recommended this to his friends

Very disappointed to receive a bottle with 10 months of its 24 month shelf-life already expired. This Siraya resin has a 2 year shelf-life. I ordered a bottle during Black Friday week – end of November, and found the bottle I was sent was manufactured in Jan 2025. So instead of 24 months to use it, I only have 14 months.