𝙊𝙧𝙞𝙜𝙞𝙣𝙖𝙡 | Tybasthe Push Start Button Cover, Car Engine Start Stop Button Cover Protector, Cool Car Accessories Interior Decor Sticker Motorcycle Key Ignition Switch Cover, Black

Great metal quality, nice snap when open, will fit 2026 subaru or any subaru with a 11.4 in screen. 3M tape is sturdy and comes with 2. Amazon won’t let me upload a video so here’s a gif

I purchased this car start button cover because I love the mech design but really didn’t know if it would work well or look good on my 21 Honda Accord. I was very impressed with the build quality, finish, look and feel. Has a good heft and solid snap when operating. The original one I received has a two piece backing that needed to be tightened but would loosen just enough to interfere with the movement. The seller actually reached out to see if I was satisfied. I explained the issues with the back and they immediately offered to send me a replacement asap no charge. As you can see the back is one piece and it is perfect. Just beautiful and I love popping the cover to start my car Excellent product. Super customer service. Other sellers should take note. Thank you very much for making my experience the best possible

Broke third time I started the car lifting the button. Not made well. Also cleaned it off with alcohol still won’t stick right. Cute if it worked. Seller took it back.

Bought this for my Jeep Gladiator. It comes with three adhesive rings (which worried me from the start - why 3?). I tried one, and it lasted about 30 minutes. Coincidentally, the seller sent me a "how do you like our product" email right after that. I explained the issue while trying adhesive ring #2. It failed, and the seller immediately sent me a replacement with hopes that it would work better. So, from a customer service standpoint, AMAZING. The 2nd taping failed w/in about 10 minutes. BUT, i think the problem is two-fold. If you DON'T have a Gladiator, and the ring around your start button is just part of the dash, you will probably have no issues. This is not 3M adhesive, but on normal dash plastic it probably works just fine. Unfortunately, the button on the Gladiator is surrounded w/ some weird rubber material, and the tape has no answer for that. A few days later I received the new cover (same adhesive rings, but very cool packaging I must add). Luckily I had some 3M 94 primer left over from another item and I gave that a shot. The 3rd adhesive ring has lasted a week!! Regardless, the cover is quite slick, and the customer service was impeccable. Highly recommended, but just know that you might have to improvise when it comes to sticking it!

I bought the red flip-top version of this button cover. It looks cool on the car, opens easily, and snaps shut nicely. On the second day after I installed it, I felt a sharp pain when I withdrew my finger from the start button and noticed a bleeding cut on the outer edge of my middle finger. It was small and I didn't think much of it until two days later when I cut the index finger in about the same spot. At this point, I was trying to figure out what the deal was. I thought maybe there was a little spur on one of the edges of the cover (if you have this model, you know what I mean) so I filed the corners down just a little bit until they were rounded. I thought this would fix the problem, but the next day, I again sliced my finger on something. It was at this point I got in close to see what could be happening. I noticed that the wire coil spring that snaps the cover open had one end pointed out into the hole you reach into to hit the button. That wire point was very sharp and turned out to be the culprit that I nicked myself on three times. Rather than return the cover, which I would rather keep, I put a couple drops of glue on the end of the wire so that it is completely covered and has no sharp edge exposed. This appears to have solved the problem because I can't feel the point any more and I haven't nicked myself again. So, my title stands as the tl;dr--the product looks cool when it installed, but with the caveat that you should check for sharp edges. Don't end up being wounded in battle.

This product is likely a good product, and I really only had one issue arise that may or may not have been caused by the product itself. Before I get into the meat and potatoes of this review, let me preface everything by stating that "I'm an Idiot!". Now that that's out of the way, I'll explain why I purchased one, where I went wrong selecting this specific button cover (not the product's fault), and what issues I had with this product that led me to immediately uninstall the cover within minutes of initially installing it. I recently (October 2023) purchased a 2020 Mustang Ecoboost. This was my first vehicle with this feature, and my only real experience using a Push Start was when I occasionally moved my Dad's Nissan Murano. Well, within a month of operating my Mustang as a daily driver, I was coasting through a shopping center parking lot after getting lunch and went to turn off the heater and instead hit the Push Start and shut the car off instead (I'm an idiot). After slightly freaking out that I couldn't get the car to start back up, I realized that I had to push down the break pedal (and possibly put the car in park; can't really remember the specifics) and finally I was able to take the Drive-of-Shame back to work. One thing was on my mind, however; and it was that I needed to see if they made some type of cover for the push start buttons so that I wouldn't get accustomed to shutting my car off in the midst of driving (thank God I wasn't on the interstate...). After doing about 3 seconds of scrolling on Amazon, I saw this magnificent red button cover that I thought looked cool and would add to the appearance of red covers for the paddle shifters behind the steering wheel. I thought to myself, "These look kind of large; I don't know if they will fit my push start button with the limited space around it", so I bought it anyway because why not, they look cool. Fast forward a couple of days, I have received them and finally its time to start transitioning the interior of my car to the "Exhibit of Bad-Ass Red Colored Accessories that Serve No Actual Purpose" that I had been dreaming about for 3-5 days. Well... the button didn't fit. That wasn't the manufacturer's fault, but was the fault of your typical moron who would buy something that obviously won't work as intended, just because it looks cooler than alternatives that will work as intended. To give myself a little credit, I did get it to kind-of fit, though it was shifted ~1/8" to the left of where it was supposed to be centered on the button, and it was forced to be at a slight angle as it pushed against the plastic piece that separates the push start button from the adjacent buttons on the dash. Unfortunately, I had to immediately uninstall it due to it tripping up the values displayed on my HUD for current battery voltage. Typically at this time, my heads-up display would display a value within the range of 13.9 V - 14.5 V (most often around 14.2-14.5 V). Well, after installing the button cover the values were erratic and began jumping from as low as 8.0V to 12V, down to 6V, up to 14V, etc. I don't know if the material was magnetic and if so, if it was close enough to trigger my sensor. The button itself isn't really near the battery location, so it may have triggered a sensor or something that transmits the data displayed on the HUD. I'm not sure. This is why I don't want to outright blame the product for this issue, as it likely works fine in most other vehicles. I haven't read of a similar issue from another review just yet, so I'll accept that the item just wasn't a match for my Mustang. It's probably fine to install if it fits your vehicle. It looks cool as hell, so why not... TLDR: I'm an idiot. I did something stupid, and my solution was to do something else stupid. The product didn't fit, but it looked cool. It messed with the values for Battery Voltage displayed on my HUD so I took it off. It probably won't mess with your vehicle's though. For those that read most of, some of, or just kind of glanced at the above "wall of text", thank you for reading/glancing and eye-rolling, and I apologize for taking four minutes (or seconds) of your life that would've absolutely been more productive or enjoyable doing something else. Anyways, have a good one. Peace!

Awesome look

Very cool reliable. Good price. Easy install fit

色々な物を6つ位買いましたが そのなかでも材質、合成、使いやすさで 一番良いものでした

それなりの重量感もあって、プラスチックとは違う安心感が有ります。

金属製で丈夫な良い商品です。

Mejoraría el pegamento pero se ve súper bien

ほかの方も書かれている様に製品自体はしっかりした作りスプリングもかっちり但し自己満足