SUNLU Water Washable Resin 2000g, Fast Curing 3D Printer Resin for LCD DLP SLA Resin 3D Printers, 395 to 405nm UV Curing 3D Printing Liquid Photopolymer Resin, Low Shrinkage High Precision, 2kg, Black

Outstanding results. Easy clean up with warm water. Nearly odorless.The sticky mess and bad smell is gone making resin printing easier to manage and a real money saver as you will not need to purchase IPA. Cures slightly faster, too.

Sunlu is quickly becoming my go to resin for printing. The ease of it being water washable, plus the low odor, has made it very easy to use. I currently am using it on a Egaloo Saturn 4 Ultra and have had no issues with print quality. The amount of detail the resin is able to produce is astounding. Just see some of the under 40mm prints I have pictured below. Even the clear resins are fantastic, I have a Saturn V rocket model print that I am turning into a night light using the light blue clear resin. Color is very pure and clear. I have even used them to make sowing items for my wife. Durability is on par with other resins, as brittle as normal plastics that you would buy models in.

Water washable minis are nice, much easier for many purposes, the detail is not the best but still more than enough for most normal purposes. The resin is plenty strong from my work so far, still be careful with it like all resins but it's not a weak one. And the cost is just great. Water washable means no dealing with IPA, wich saves even more money, and is just nicer to be around, less fume hazard from that, still use mask when working with resin anyway though.Personal tip, first let the minis sit on the printer an extra hour or at least half hour once done so they drip resin off. Next, put them in one small tupperware with warm to possibly almost hot water and shake around a bit. This loosens the supports up for easy removal, and gets the majority of the initial remaining resin off. Once you remove supports, then rinse/wash them in a second small water container. With two containers, the second one will remain pretty clean with most of the resin first dripping off and then rinsed in the initial warm water. So the second one lets you clean them really nicely. If you don't do two stage cleaning you will notice a residue/sheen left on these, not that bad just worth notice if you want the best minis you can get with it.EDIT: Some photos, the harlequin is in 20um layer thickness on a phrozen 8ks mini using the SUNLU Water Washable Resin Grey, on the larger pic all the grey non painted ones are also using the resin, though some at 50um layer thickness, in genera though I think you can tell that it's got plenty of great detail on it. Easily good enough for the vast majority of prints, even with some finer textures or stuff.

Great resin for the price

About as brittle as uncooked pasta. if the print is as thin as spaghetti it will be about as weak as spaghetti. Go break a piece of spaghetti to see what I mean.Good detail. Thicker items are more sturdy to handling, but still vulnerable to shattering if dropped.Cleanup can be difficult. If the water in the cleaning vat is allowed to get too dirty, it becomes difficult to cure the resin particles in the water so as to separate them from the water. They tend to form a jelly which is difficult to harden in sunlight or under UV lamps, and thus can't be separated from the water easily. Evaporation of the water is inhibited by the jelly. So putting the dirty vat in the sun isn't good enough; you'd have to pour out the jelly on something flat so it can be thin enough to cure and have water evaporation. You should definitely not pour the stuff down the drain nor dump in your yard; the waste needs to be cured before it can be disposed of in the garbage.

All around great product, setting are on the label, also very Informative website. Print quality and detail have been very consistent and great look

Awesome as always!!!!

I have been 3D printing for several years now on a Elegoo Mars 2. I generally have issues every 3-4 prints. A lot of it has been beginner errors, but I will say this. Since I tried this resin I have had none. I am almost done the bottle, around 12 prints later. The stuff is strong, has a lot more give than other resins. Has the least smell of any ive used. I still use isopropyl to clean the prints before water, but the ability to just use water, expose it to UV and then dump it is incredible. Saves tons of time. It also is a LOT more liquid and less viscous than other resins. Most resins are like white glue, this is like cough syrup. So suction isnt a problem for me anymore. Nothing is getting ripped off supports from the suction force. I am going to be trying their other stuff because of this. I havent seen a downside to this, including price. The bottles are easier to store, easier to handle. The smell, the quality, everything is 10/10.