ETENWOLF T300 Digital Tire Pressure Gauge 3-200 PSI, Industrial Tire Gauge Calibrated to ANSI B40.7 Grade 2A(Plus-Minus 0.5%), Replaceable AAA Batteries (Vivid Orange)

Excellent. Works very well, user friendly. Accurate and ad great price.

I had a manual tire gauge, but found it very difficult to read the microscopic numbers. It wasn't very accurate either. This digital tire has a nice digital screen for easy readings. It is also very accurate, and simple to use. This tire gauge takes two triple A batteries while the other ones I looked at took watch batteries. It is well built, and also has a light. If you're looking at replacing that old manual gauge this is a great product. I would highly recommend it, and would purchase it again!!!

When the last of my digital tire pressure gauges, which are no longer manufactured, recently stopped functioning, I began research to find suitable replacements. There are of course many digital tire pressure gauges from which to choose, however the vast majority of them failed to impress for a variety of reasons, not the least of which were their poor or mediocre specifications or numerous user complaints. After a considerable amount of research, I located the Etenwolf T300 digital tire pressure gauges on Amazon. The most significant data which received my attention is that the Etenwolf T300 gauges conform to ANSI/ASME Standard 40.7 2A. I had not previously encountered affordable, consumer grade gauges that were calibrated with that level of accuracy. ANSI Standard B40.7 level 2A is a standard which applies to digital process gauges, and specifies accuracy within a +/- 0.5% span of permissible error. That level of accuracy means that on a 35psi automobile tire, the expected accuracy of the gauge is within +/- 0.175psi which is a ridiculously high level of accuracy for inflating a typical automobile tire. However, that ANSI B40.7 2A claim appears to be an error on the webpage. According to the printed manual which accompanies the T300, and according to the individual Calibration Certificate included with the gauge, the T300 actually conforms to the far more stringent and more precise B40.7 Level 3A standard. B40.7 3A specifies accuracy within a span of +/- 0.25%. That is a level of accuracy that is needed for industrial test gauges. The other specifications provided in the product description included the usable range of 3 – 200 psi which makes the Etenwolf T300 suitable for almost any tire I can reasonably expect to use, including my low-pressure garden tractor tires. Another factor that I found very appealing is that the Etenwolf T300 is powered by 2 – AAA batteries. Many tire pressure gauges require button batteries of various sizes, which never seem to be immediately available to me when they require replacement. With the ubiquitous AAA batteries, I am assured that I will always have replacement batteries readily available when needed, and even when away from home, they can always be easily purchased in almost any local store. Etenwolf provides 2 Duracell alkaline AAA batteries with the T300. I have also used the gauges with Ni-MH rechargeable cells, and they perform perfectly well. I ordered a Cyan case T300 because Amazon had them available for more rapid delivery than the Orange model (there is also a Gray model, which was out of stock when I purchased). Once I received the T300 and evaluated it, I was very impressed. The plastic case appears to be a reasonably thick, and potentially durable gauge of injected plastic. The T300 has a very solid feel and heft, which impressed me. The assembly of the T300 appears to be very good and precise. This tire gauge genuinely appears to be of very high quality. The battery compartment at the end of the unit has a slide-out which also stores an included Presta valve adaptor for high-pressure bicycle tires. The white 4 place LED display digits appear to be 11mm tall x 5mm wide. The gauge resolves to 10th PSI (1 place right of the decimal). Most tire pressure gauges only resolve to ½ PSI display. There is a momentary, rocker type switch on the lower part of the case which controls all functions including power and unit of measure selection. The T300 can measure and display PSI, kPa and bar. Holding the switch for 6 seconds will turn the power off, but the gauge will also shut down automatically after 30 seconds of non-use. After a measurement, the gauge resets to 0 in approximately 5-6 seconds for repeat measurements. The digital display also displays low battery level once battery reserve falls to 20% or below. The nose of the gauge, which must mate with the tires Schrader valve, seals very tightly against the tire valve. There appears to be a compressible rubber gasket in the nose fitting, which ensures a solid, leak-free union with the tire valve. Resultantly, the T300 produces very quick and reliable measurements without the need for repeated repositioning efforts to get an adequate seal for a reliable measurement. There is a white LED lamp below the nose piece which makes use in dim or dark environments possible. I evaluated the functioning of the gauge by taking multiple (many) repeat measurements using both PSI and kPa scales. The repetitive consistency and accuracy of the readings was notable. I was so favorably impressed with the T300 that I ordered a second gauge (this time with the orange case). When I received the second T300 I could not resist comparing them. I collected more than 20 successive measurements, alternating the gauges. (Total of 44 measurements collected). Half of the measurements were obtained in PSI and the other half in kPa. The consistency and accuracy both with the same gauge, and between the gauges was extremely impressive. I believe that the Etenwolf T300 tire pressure gauge is outstanding. It is well constructed, giving rise to the belief that it will be very durable. It is extraordinarily accurate, being calibrated to a measurement standard which applies to industrial process gauges. It functions very well and with consistency. The Etenwolf T300 is the best tire pressure gauge that I have used, and I am hopeful that it will provide many years of reliable service. I would not have purchased two of them if I was not extremely impressed with them!

This tire gauge works exceptionally well with backlit pressure readings that are easy to read. They will read in PSI and Bar and changing from one to the other is easy to do. The plastic case feels a little thin making me wonder how dorable it will be when used repeatedly, but it would be an excellent tire gauge to keep in the glove box for occasionally use.

Works as described. Minimal air loss when connecting to tire stem. Easy to read and perfect size and lightweight for holding in my small hand. Appears to be good quality.

Easy to use, works as advertised. No instructions needed, Add batteries (included) and gave me tire pressure on the 4 tires of my new (to me) travel trailer. Critical after sitting for 4 years. Was not looking forward to finding a tire inflater in a gas station without tricky maneuvering.

I recently received my digital tire gauge. Simple operation and the little 'headlamp' is perfectly situated to illuminate the tire valve stem. The digital read out is clear and easy to see. And the batteries are included! The gauge came set for psi . I discovered the tires on my vehicle are all within .2 psi of each other! A great little tool to keep in your glove box or door pocket.

The ETENWOLF T300 Digital Tire Pressure Gauge is an absolute game-changer and has quickly become my go-to tool, replacing all the finicky analog gauges I used to own. If you need precision and reliability, especially for high-pressure or industrial applications, this is the one to get. Professional-Grade Accuracy: The key selling point is the precision. This gauge is calibrated to ANSI B40.7 Grade 2A standard, offering an accuracy of ±0.5% of the span (or ±1 PSI), which is phenomenal. I've cross-checked it against three different professional gauges, and the T300 matches them perfectly every time. Massive Pressure Range: With a range of 3 to 200 PSI, this gauge handles everything. I use it for my daily driver, my motorcycle, and even the heavy-duty tires on my RV and utility trailer—a true industrial-level tool that makes it incredibly versatile. Built Like a Tank: The construction is sturdy and durable. The company even claims it can withstand being run over by a car (and based on how solid it feels, I believe them!). It features a built-in AI chip with thermal compensation, meaning you get reliable readings even in extreme cold or heat. User-Friendly Features: The large digital screen is bright and easy to read, even in direct sunlight. The illuminated nozzle is a brilliant feature, making it simple to find and seal the valve stem in dark garages or at night. Plus, it uses easily replaceable AAA batteries, not those annoying little button cells. Stop guessing your tire pressure and upgrade to the T300. It’s a small investment that pays off immediately in peace of mind, better fuel efficiency, and safer driving. Absolutely five stars!