GIGABYTE B760I AORUS PRO DDR4 (LGA 1700/ Intel/ B760/ Mini-ITX/ DDR4/ Dual M.2/ PCIe 4.0/ USB 3.2 Gen2X2 Type-C/WiFi 6/ Intel 2.5GbE LAN/Q-Flash Plus/Motherboard)

Recently bought the GIGABYTE B760I AORUS PRO motherboard and after a few weeks of testing here is the review: Compact Yet Mighty (★★★★★): This little MOBO surprised me. The B760I AORUS PRO is designed to be small, i am using this in a NZXT H1 and cannot reccomend it enough for a mini itx build! It is so feature rich and fits neatly into compact builds without sacrificing any performance. PCIE gen 4 for your NVME drives Im getting 3.7gb disk usage in steam downloads - 2 NVME slots and DDR5 RAM slots are a must, definitely worth getting the pro and splashing on some DDR5 6000mhz RAM. User-Friendly BIOS (★★★★★): The BIOS on this thing is surprisingly user-friendly. Even if you're not a tech genius, tweaking settings is straightforward. GIGABYTE made it easy for anyone to change basic settings like Resizable BAR and XMP in the bios. AURA Sync Magic (★★★★☆): If youre in the AURA ecosystem of RGB devices then this is a nice touch but i find the gigabyte control center to be lacking - may just be because its my only gigabyte component Cool and Calm (★★★★☆): I like the inbuilt temperature monitoring but there isnt much to tweak outside of the bios. Connectivity Check (★★★★☆): For a compact board, it's got a decent set of ports. From USB slots to HDMI, it covers the essentials. No major complaints here – everything I needed was right at my fingertips - dont forget the wifi antenna too if youre not going ethernet - although I highly recommend taking advantage of the 2.5gbe port. To sum it up, the GIGABYTE B760I AORUS PRO is a solid choice for those who want a powerful feature rich motherboard in a mini itx formfactor. It's not perfect, but for a hassle-free build with some extra flair, this little guy gets a thumbs up from me. If you're into compact and capable, give it a thought!

Of course that leads to some difficulties, such as reaching some of the connectors and screws. Also, the 2nd M2. nvme connector is on the back side, and is covered by a backplate/heatsink. Any sloppy moves while aligning that thing to be screwed back on can cause the protective / heat conductive film to be mangled. The final result is a very nice well-performing system. The onboard intel i225-V ethernet chip works fine @ 2.5GHz under Freebsd 13.1. Didn't try the WIFI. The provided wifi depends on the board revision. See the Gigabyte manual. One problem was the Amazon fulfillment: they first sent me a board that had been opened and fiddled with. So watch out. I returned it without trying it. The 2nd one was fine.

I used this motherboard to do my first mini itx build. Everything went pretty smooth and I really liked the bios flash button, 3 case fan plugs and the 2 m.2 slots on the motherboard. I paired this motherboard with an Intel i7 14700k and had no trouble updating the bios with the flash bios USB port. The motherboard box also came with adapters to help utilize the 2 fan ports on the top right of the board. If you want to add more than 4 fans and one CPU pump/cooler you'll definitely need some fan spliters. The only Issue I had was with my front panel switches which aren't labeled on the MB where they go. You'll have to go online and find the manual to know how you switch should be connected. I would recommend this motherboard worked out for me and the bios is very easy to navigate.

This is much better than a B660 ITX DDR5 board I recently installed from a company whose name rhymes with MASUS. The pictures are confusing but this baord actually accomodates 1 NVME on the front and one on the back. Both are outfitted with impressive heatsinks that do a fantastic job of keeping the NVMEs cool. On the other board I had, I had to buy a custom heatsink to keep NVME temps down as their heatsink was inadequate. Also for my 2nd drive on that board I had to buy a heatsink too. Gigabyte includes a huge backplate as a heatsink for the 2nd NVME on this board. First thing I did was go into bios and update bios to latest version from usb drive. Like other ITX boards, when you install Windows it will not find wifi drivers. For me the easiest way to solve this was to copy the drivers onto a USB using another computer and then at the OOBE screen press CTRL+SHIFT+F3 to reboot into Audit mode. This boots into the built in administrator mode and allows you to install drivers. Once I got the wifi driver on, I rebooted back into OOBE mode using the Sysprep tool. Everything I am describing you can easily find more detailed instructions for by googling the terms I am using. After that, installed all the drivers from gigabyte website and everything perfect in device manager. I am using this in an NR200 case with 13400 and Deepcool heatsink for CPU. I have an NVidia 1650 installed mainly using it for work. Ran some games on it, no temperareture issues at all. I am not installing the gigabyte control center as I have seen poor reviews of it. I am super happy with this hardware so far. This computer is a champ for medical imaging work. 7/31/24: I am lowering my review by 1 star as I used this board in a case that comes with a PCIe3.0 riser cable. There is no option in the BIOS to change the graphics card PCIe speed independent of the m2 nvme sata speed in the slot next to the CPU. There is only one option for both to lower the speed to gen3. So unfortunately this halves the throughput of a gen4 nvme ssd. lowering the graphics card to gen3 has almost no discernible effect even when using the highest end GPU. Asus BIOS does let you set the PCIEx16 speed for the graphics card independent of the m2a SATA speed. I have reached out to gigabyte support requesting them to add this feature for the many people who would use this board in a SFF case with riser cable and not wanting to spend the big bucks for a pcie 4.0 riser cable.

This is a review with the bios updated to F12 sept 2024, no other updates released as of March 2025. No EZ-debug lights(but rgb yes?), can''t run ram above 3400mhz when the same ram was running 4266 cl16 with the same cpu on the MSI equivalent B760i. I've tried 5 other kits and no luck, blue screens or black screen until cmos reset*. Bios is terrible, laggy, some sections are unresponsive until you click 15 times. There are settings that freeze the bios and the motherboard has no cmos reset button. You'll have to short the pins after opening your case and moving any cables/hardware that may be in the way. *Reseting the cmos will also delete any of your bios profiles so there's no point to even having the option to save one. MSI, EVGA, ASUS, does not delete you profiles and gets you back into the bios to change settings. That's the point of a cmos reset, not act like you reflashed the bios and start from square one. I'll leave it at that, but that's just the tip of the iceberg. Won't purchase Gigabyte ever again.

Picked this up as a returned item for the low. Had no issues updating Bios for 14th gen and my i5 is handling my windows docker server great DDR5 ram 2.5 gig Ethernet and very small form factor all’s great quality… the M2 heat shield is also really nice the smaller the board the harder it was to work on but turned out pretty clean.

Got everything installed and setup; got to the point to where I had the 4060 GPU installed. I found I kept have issue when trying to use it. When booting, display output would stutter, apparently running slow like I was loading from a HDD. Did standard troubleshooting steps, tried another GPU, and Mobo. In short, the issue was isolated to this mobo, possible the PCI slot. I'm sure this isnt a common issue, but in my case it appeared to be.

Couldn’t find a good deal on a decent ITX mobo so I took a shot with a “Like New” one. I gotta say, this was drastically undervalued but absolutely to my benefit. First off the shock that this board comes with a backplate that includes a built in heatsink for the additional M.2 slot was absolutely fantastic. I do not understand why more mobo manufacturers don’t do this exact thing for ITX boards. So helpful for SFF builds. I’ve been using this board in a Fractal Design Ridge for a family room PC and it’s absolutely brilliant. Almost made me want to switch out my other SFF mobo for another one of these. Easy to limit the Wattage and Voltages to keep the entire unit running within spec while maintaining temperatures.