Trend CLEAN/500 532 ml Tool & Bit Cleaner

Works really well. Cleans most wood working tools. Gets rid of stuck on resin.

Great product. Super job on table saw & track saw blades & all router bits. Came up like new.

From my test it takes way more than just spray, wait 5 min and wipe. Had to soak for a day.

Excellent product. Used on hedge-cutter whilst cutting 150 m of hedge. Lubricates and cleans blades very effectively.

Very effective on circular saw blades, router cutters etc, but do wear gloves.

Awesome stuff. Plus 10 times cheaper than what I used to use!

Use to bring my circular saw blades back to life. Take the blade out and lay flat. Spray the wire brush all the resin/tanin/rust off. Looks brand new and cuts well after just 5 mins cleaning.

Great stuff bought to clean residue off an hedge trimmer and it works a treat. Good value as it is cheaper than proprietary brands such as Dewalt also contains more fluid, give it a go would recommend.

This product really cleans tools and tool accessories properly and with ease .

Cumple, no hace milagros, pero se nota.

Tres efficace pour enlever la résine de cèdres.

I've been using Trend tool and bit cleaner for at least four years for all of the cutting edges in my shop. I think I'm on my third bottle since 2020 or so. I really love this cleaner and it makes such a huge difference having clean cutters on all your machines. I initially bought it to clean table saw blades, and it works great for that. I have a silicone baking mat that I put down on my bench. I spray the blade on one side, flip it over, spray the other side and let it sit for maybe 2 or 3 minutes. From there, I use an old tooth brush to scrub off the resin with little effort. I attached a short video where you can see how well it cleans my sawblade with only about ten seconds soak time--it still gets most of the residue. Finally I just pat dry with a paper towel and I'm good to go. No need to waste the product rinsing the blade afterwards, and no need to be scrupulous about getting all of the product off of the blade before using it. It acts as a lubricant and rust inhibitor, so just pat dry and get back to work. I clean my blades every day that I use them, and it pays off--if you think your blades are dull or if you're burning the wood--90% of the time they are still sharp but just dirty, and cleaning them makes a night and day difference. Since then, I've started using this product to clean router bits, carbide bandsaw blades, jointer knives--I even spray down the helical head on my 15" planer and scrub it down from time to time. It also works great on those expensive sanding belts, especially if you have a bunch of buildup from resinous tropical hardwoods. When you spray it on, you can see the resin absorb the cleaner and come loose. Then I wipe it off, and follow that with a regular rubber belt cleaner. For really bad buildup you can spray the cleaner on liberally and wrap the belt in clingfilm or a garbage bag and let it sit for a while. For things like router bits I spray them down and wrap them in clingfilm, put them in a shot glass and come back 10 minutes later to scrub with a toothbrush. When routing really hard resinous woods I'll even spray router bits after a pass or two to clean them right on the router. You can also use this stuff to clean gunk off of hand plane irons, drill bits--you name it. Another trick is to take your cleaning cloth or paper towel after you've cleaned one tool and use the residual cleaner to wipe off your chisels, drill bits, whatever. It acts as a rust inhibitor as well, so it's great for that. Last but not least, this stuff is a mild lubricant--you can actually leave a bit of residue on a table saw blade or router bit and it can give you an advantage against burning. You don't want the cutter to feel wet to the touch, it should just feel a little slick. Some folks will also use this as a honing fluid when sharpening chisels / planes, etc., though I just use soapy water myself and wouldn't waste this stuff for that, but some people don't like to use water when they are honing, and this stuff would work great, and avoid rust. So I definitely love and recommend this stuff. A little goes a long way, and a bottle will last you a while.

Purchased to clean up the bar on my Dewalt hedgers.. works great and will purchase again