VEVOR Motorcycle Lift, 1100 LBS Motorcycle Lift ATV Scissor Lift Jack with Dolly & Hand Crank, Center Hoist Crank Stand with Wide Deck & Tool Tray for Street Bikes, Cruiser Bikes, Touring Motorcycles

I use this lift to raise up my Suzuki DR650. The bike only weighs about 360 pounds so, in theory, this lift is over kill but it works great. It seems very sturdy and well built. I did wipe some grease on the screw threads before I used it. I don't feel the need to use a power tool to operate it, I just steady the bike with one hand and turn the included tool with the other. There's a lot of suspension travel in the DR so it has to be raised up a bit but there's no problem lifting it. I used it for a tire change day. I took off only one wheel at a time and never felt like the bike was at risk of falling.

Works really well to be so simple, and small. I have a v star 950 and the motor is just a little outside of frame. I had to use 2 pieces of 2x2 to put on jack. Lift worked really well and was stable. I would recommend this jack if your doing small DIY maintenance.

I bought this lift to take my electric wheelchair carrier off the vehicle. It cranks very easy by hand and I use a DeWalt impact driver and it works perfect now one person can put the carrier on and off the vehicle by themselves. Great price great quality.

Nice, sturdy scissor lift. Works great for my Vespa GTS. Heavier than expected. Dolly is a nice addition.

Overall performance was decent for what I paid (used/returned item price was an absolute steal). I only needed it to lift electric scooters. These PEVs are commonly flat on bottom and are usually between 75 -150 lbs, so well within the tolerances. It's certainly not a higher performance shop centerpiece that anyone will be envious of. And I personally would hesitate to put a coveted 800 pound bike upon it. But it has a earned its keep this time around. I shall not be returning it. My only complaint is that the jack slides around inside the "dolly" pan because there is A LOT of room and the surfaces dont offer any substantial resistance against eachother. A thin silicone mat would fix this, or several hundred additional pounds of load probably. I ended up stuffing some EVA foam around the base that I had lying around. Temp fix but its been working well enough. Have fun putting all those nuts and washers on to secure the wheels. I would have appreciated hex head bolts instead as I didn't actually have box end wrenchs to fit simultaneously. That's my two cents for what it's worth to ya.

I'm using this to support a 400lb honda. It's works great. Easy to lift. I used a small impact driver and a socket. I like whe wheeled frame so I can just v it out of the way when I'm not restoring or working on the bike. You can't go wrong with this one.

I needed to lift the rear of my motorcycle in order to replace the suspension. Car jacks lift at an angle, so they would cause problems. This lift was perfect. It's well-made, solid, and easy to turn the crank a little at a time to align components. Just what I needed, and a quality product.

I recently bought a project motorcycle and it's the first street bike I ever owned that didn't have a center stand. Unlike my dirt bikes this thing is too heavy to lift up manually onto a fixed stand so I needed a proper jack, but didn't want to spend hundreds of dollars on something that I only use a few times a year. This is perfect. I can do it solo, sit on the bike myself and put it upright, then slide this stand underneath and turn the nut with the included wrench to lift it up. I haven't lifted the whole bike with it but depending on the position forward or rearward under the frame rails, it'll easily lift a single wheel off the ground at any time for service. I read a few reviews about the bearings failing or the nut getting stripped on these scissor style jacks. I don't foresee any issues but just to be safe I did add some extra grease to the threaded rod and to the bearings just to help with some additional lubrication. An impact wrench would make this go up and down faster but honestly it's pretty good manually and you have precise control so it's not an issue. Price was good, motorcycle is very stable on it, and the one single reason I chose this over the other options is the included safety pin. Instead of relying solely on the worm gear there's a safety pin that slides through both sides of the base and locks the rolling leg in place. I'm very pleased with this thing especially for the price. Five star product for sure.

Utilisation un peu "détournée" du produit : associé à des mini plateaux à roulettes, je m'en suis servi pour déposer des radiateurs en fonte (120kg) et les reposer après peinture. Zéro effort. Le cric est bien conçu, bien fabriqué, est hyper solide et son épaisseur réduite lui permet de se glisser sous des éléments au raz du sol. Le plateau est bien antidérapant ce qui rassure lors du levage. Je recommande.

Parfait ++

Great scissor jack for the price. Lifted securely my Royal Star. Thanks

Amazing product. Used it to work on my goldwing. Can handle the weight. Fast delivery.

Gerne wieder