Creality Official Ender 3 Bed 2PCS Ultra-Flexible Removable Magnetic Removable Build Surface Hotbed Cover Print Platform Kit for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender5 Pro/Ender 3 S1 235x235mm

These are proper Creality replacement beds, not the cheap knock-off ones, and the quality feels exactly right. I bought them after I managed to crash the hotend into my old bed at full temperature and burned a hole in it. Fitting was simple and the flexible surface works really well. Prints stick amazingly well to the heated bed, but still release easily once it cools down and you flex the sheet. The magnetic backing is strong too, although make sure you fit the magnet plate the correct way round. I got it wrong at first and thought it wasn’t sticking properly, but it was just the orientation. Great replacement, good value getting two, and much better than taking a gamble on random copies.

It's super sturdy and heats up evenly which makes all my prints stick perfectly without any warping. Installation was a breeze, and it fits my printer like a glove. The surface is smooth and easy to clean, which is a huge plus. Highly recommend this to anyone looking to upgrade their 3D printing setup

Yeah, I thought I didn't need to read the instructions, so like a complete idiot I didn't. It is all really easy, but the stick on magnet sheet has to be properly aligned with the print bed itself, or it simply doesn't adhere to the magnetic sheet. Right, with that bit of stupidity out of the way I found that I had to reduce my print speed on the initial layer by 2/3rds. I also upped the temperature of the bed by 4 degrees. These have helped the initial adhesion with my Sunlu PLA+, something I had teething problems with. But now it works flawlessly. Brilliantly, even. I haven't even got to wait for the bed to cool before being able to remove my prints. A quick wipe with Isopropyl Alcohol between prints helps performance and longevity. Overall, for the price and the performance I'm delighted.

Not bad, does job well

Come though in nice strong packaging Work perfect and fit lovely on the ender 3 bed. Will use again when im needing new ones

Got this to replace the original Ender 3 build plate which has seen significant battle damage due to my newbie printing mistakes, (hot nozzle + to high build plate = oops) the surface texture is pretty much the same as the original maybe a little finer in my oppinon. you get 2 magnetic surfaces which is great and going from a clip attached build surface to a magnetic one is night and day! clips are quite annoying to deal with. but magnetic? just pull it of when the print is done, the surface is very flexable so easy to pull even really stubborn prints off the bed, then when you're ready to go again, slap it back down, I will say, watch how you place it back down, I put it down once with too much of an over hang on one side and it kept scraping against the printer, so be somewhat cautious with it.

These work great, so much easier getting prints off. Easy to fit & having 2 in the pack is also really handy.

If you have issues with your first layer sticking these will most definitely sort that problem! And that, alas, is also the problem. Whilst I was able to peel my printed item from the bed, removing the remnants of the supports, brim & rafts was another story!!! These sheets do come with a warning about PETG becoming bonded, but given that I was using PLA+, I didn't think it would be an issue as they are primarily designed to be used with PLA - perhaps the + in the PLA+ makes it bond to the surface? I tried using a scraper to remove the remnants after heating the sheet with an hairdryer, freezing the sheet & wetting the sheet, all to no avail. I also tried using a razor blade to accomplish this, and the net result being that I ended up gauging out large chunks of the surface rendering the sheet pretty much useless. Sods law being what it is, I printed two items back to back on the two different sheets, and so both were ruined - there's only so much patience one can have before getting heavy handed!! Hopefully, the PEI sheet that I also purchased will fare better, failing that, back to good old glass!!! I also found that the sticky layer started bubbling after being stuck on to the hotbed, even though no heat had been applied at that time - I put it on, and went back to it several days later. I had to peel this off and ended up using the one that same with the PEI sheet instead, so hopefully that won't bubble! Great first layer adhesion, a very strong magnet, but, unlike me, if using, do some research in to perhaps putting something on to the sheet prior to printing to prevent the bonding! (even with PLA+!)

Ich habe sehr viele Modelle mit PLA auf diesem magnetischen Druckbett gedruckt und war durchgehend sehr zufrieden. Für den Preis bekommt man hier wirklich eine sehr gute Qualität. Die Haftung bei PLA ist zuverlässig, die erste Schicht wird sauber und gleichmäßig, und nach dem Abkühlen lassen sich die Teile durch leichtes Biegen problemlos lösen. Für reine PLA-Anwendungen kann ich dieses Druckbett absolut empfehlen. Wichtig ist jedoch ein Hinweis für alle, die mit PETG drucken möchten: Ich habe später begonnen, mit PETG zu experimentieren (ca. 260 °C Düse und 80 °C Bett). Dabei ist das Druckbett beschädigt worden – nicht direkt während des Drucks, sondern beim Abkühlen. PETG zieht sich stark zusammen und verbindet sich sehr intensiv mit der Oberfläche. Beim Ablösen hat sich dadurch die oberste Schicht des Druckbetts gelöst, wodurch es unbrauchbar wurde. Allerdings steht in der Produktbeschreibung klar, dass das Bett für PLA gedacht ist. PETG wird nicht als kompatibel angegeben. In diesem Fall lag der Fehler also bei mir, da ich die Hinweise nicht ausreichend beachtet habe. Für PLA ist dieses Druckbett wirklich top und absolut sein Geld wert – daher trotzdem klare 5 Sterne von mir.

Acheté en remplacement du plateau d'origine de ma Ender 3 qui n'accrochait plus rien. Apres un petit reglage du z offset, plus de souci d'adhésion, pas besoin de laque ou de colle. La souplesse du plateau permet de décoller les pieces facilement sans grattoir. Le systeme est composé d'un feuillet aimanté qui se colle sur la base du plateau d'imprimante et d'un plateau aimanté souple sur lequel se font les impressions. A noter : 2 ensembles dans le colis, ça permet de vour venir s'il faut un jour remplacer le système.

Ik vroeg mij af waarom ineens mijm printjes zo's slechte onderkant hebben. Dat 1 kant schuin weg is gesmolten. Nu heb ik dit getest, deze plaat vs mijn ouder/orginele Ender bodemplaat met exact dezelfde vierkantjes. Deze nieuwe platen zijn het probleem, koop dit niet!

Utmärkta och bra förpackade.

good adhesive quality, expected rigid like original however it is very flexible and best way to remove items is to let bed cool down (below 30 Celsius) Even with this technique struggled alot to remove printed items