Vertical Heat Pressing Machine,Heat Set Insert Tool,Brass Inserts 3D Printing,Heat Set Insert tip for Thread Knurled Nut M2/M3/M4/M5/M6(1/4)/M8

Well built, although the instructions are next to useless. Dual voltage soldering iron supplied. Some are reporting it not working, perhaps not holding the button in for long enough? Heats quickly and no issue putting M6 inserts into petg. First one was lost, so I was refunded. Second one arrived quickly. Will be put to work often, looks like it’s up to it.

The press jig is good and sturdy but it came with a soldering iron I didn't need, I didn't mind that but the iron is not for UK power or UK sockets. I did fit a UK 3 pin plug to it but it didn't work. As I said tho, I already had an iron but I would of preferred it was less expensive and no iron supplied. Anyway, it is a good piece of kit for inserts, they go in nice and straight. I did however, have to make a modification for the spring, it uses a tension spring from the top of the upright and this prevented me from getting taller parts under the iron, I've modified it for a compression spring arrangement to make it even more useful for me at least.

Disapointed with this, has a few issues, but the main one been; The Vertical axis and the horrizontal axis that has the iron on, are held together by a bracket with 3 bearings on it, 2 on one side, 1 on the other side, these are meant to allow the horrizontal axis to run up\down the Vertical axis smoothly. Instead they are a joke, the bearings do not sit tightly to the Vertical axis, and instead allow alot of play\wobble , if you push the lever on the right side down to lower the iron instead of lowering nicely, it twists the axis due to the bearings not been a snug fit, and jams up. Ok so push both ends down at once right? (Even tho theres no handle on the left as it shoudnt need one) Wrong, still to much wobble, and you have to keep an eye that your pushing both sides down evenly paced, while also not jaming it up as it twists. The bearings are possitoned wrong, they dont sit snug in the grove of the vertical axis, and you can practicaly twist the bracket of the axis. Do yourselfs a favour, go elsewhere, this is a complete waste of money. UPDATE; So on requesting a return\refund, the seller is asking for a £20 return fee? Complete joke, avoid this shop and item!!

Changed the 2040 aluminium section for a longer one in order to be able to heat press into taller items. Also got a cheap 240/110v transformer from Amazon for the soldering iron. Works well.

Well constructed and ideal for 3d printed parts. The only downside is its shipped with US plug.

Does not come with a UK electrical plug. Very dissatisfied. Plug was US style

高さが280ミリの表記はありますが、スプリングの長さ分、加工出来る物の高さに注意が必要でした。高さ90ミリ程が加工高さの限界です。スプリングの全長を短い物に交換するか、10ミリ幅の輪ゴムに変更し長さ調整すれば、高さ130ミリくらいまで加工出来そうです。デジタルハンダごては、設定温度に素早く上がるため大変便利です。耐久性が心配です。製品本体は精度も良く組み立ても簡単でした。

Nos gusto mucho su funcionamiento facil y preciso, para colocar insertos, nosostros colocamos al rededor de 300 insertos en una tarde, habia veces que quedaban chuecos, con esta herramienta, hacemos que todos queden derechos, terminamos comprando 2 herramientas de estas. A parte estan robustas.

Works wonderfully, assembly was a little confusing. The steps are listed on the store page and come printed in the box, take note that they look like 1,2,3 6,5,4 This threw me a bit. It also came with an extra M5/Tnut which I was confused on what step I missed. Otherwise, this seems like a well machined piece of equipment, and I believe it'll last a long time. The included iron heats up incredibly quickly and has temperature control that my other soldering irons don't - helps to create as little smoke as possible. It's super easy to get straight presses now, in a consistent manner. I was able to press several in a row without tons of re-heat time in between. It's light, but also has some weight which makes pressing a breeze. It comes with the tools you need to assemble as well, so it's a full kit. The best part is that it also includes the heat insert tips! If I had realized, I could've saved some money on a different set I bought. However, the tips I bought fit this iron as well, so I'm not out anything. Finally, it came with a plastic cap piece that's not in the instructions; it goes on top of the vertical tower to cover the exposed aluminum and give it a finished look. Great price, great tool. Would definitely recommend and would buy again if needed.

This is a really nicely built product. The hardware goes together very nicely and it does exactly what it needs to do. It came well packaged with all the parts nicely bagged and protected with foam. The tapped holes in the 2020/2040 rails fit the included bolts perfectly. The plastic parts are will made and secured the soldering iron tightly to the horizontal rail. I only had M3 heat set inserts on hand, so that's the only one I've tested. The soldering iron heated up very quickly and I was able to secure inserts easily into PLA and PETG parts. The video I posted shows the unit inserting an M3 insert into PLA. I added a 3D printed holder for the inserts onto the back of the machine, secured in place with some M3 bolts and 3D printed t-nuts.

Das Set scheint stabil, ist mit dem Lötkolben in der EU aber nutzlos.