7-1/4”(185MM)-40T, Super Thin Kerf 1/16"(1.6MM), Arbor 5/8", Anti-Stick Coating, Circular Saw Blade, FRAMING&Ripping, for Laminate, Veneer Board, Plywood, Hard Wood, MDF and HDF Cutting

I'm always skeptical of saw blades that are not of the standard big name. This blade is sharp has stayed sharp for quite some time now I've cut a lot of plywood and it's still cutting like the day it came out of the box will definitely buy more of these

I had to cut a new kitchen counter top. I got the 1.5 inch thick X 74” Width wood laminate form ikea for like $80 and this circular saw did the trick! I had to use the right blade for the job WHICH IS VERY IMPORTANT! The blade I purchased was also from Amazon it was “LSHUZIYU 6 1/2 blade with 60T” and I also got the SWANSON TOOL CG 100 to help with setting up a saw guide. This was also from AMAZON! I saved myself alot of $$ by doing this myself and I recommend this saw all day ! I’m not a very handy person at all but this little tool turned me into a BIG DIYER. Once the saw gets going (as long as you have your guide there to help with straights cuts) you are good money !

Cuts very cleanly and fits my circular saw as expected. Not sure how long it will last but is a good value. One complaint though is the label on it came off and though that doesn't sound like a big deal it came off the whole thing in a fly everywhere sort of way. A little on the dangerous side. So use caution the first few cuts. Or try to remove it before hand. Otherwise its a very nice blade.

NiCCCCCCCCCe

I bought this blade because it has a thin kerf and was pretty inexpensive. I was surprised how well it works. It slips through plywood with ease. I am using it on a Bosch jobsite table saw and it makes the saw cut more like a high powered non portable saw. Im not sure about longevity i have had it a few weeks and its still sharp.

This is a nice blade, but the advertised kerf is not 2.0 mm, but 2.3-2.4 mm. I bought this blade for the purpose of cutting a 2.0 mm slot, but alas it is bigger.I will keep the blade, but be advised.

I purchased this specificslly to cut some laminate flooring planks for a small 200 sqft project. Used this blade in my 20V circular saw to "rip" the first and last row of laminate planks. It gave a smooth, straight cut and performed as well on the last as it did on the first.

This is a high quality saw blade with sharp teeth and twice as many as the blade that came with my saw. It cuts through 2x4s and similar wood like butter and leaves very smooth cuts without ripping pieces out at the end or leaving jagged edges. They also include 3 different size washers which all fit in the center hole of the blade to function as adapters for various brand saws. As you can see in my pictures, there was one which fit my Ryobi One saw perfectly.My only complaint is that all of the information for the saw blade, such as the size and the direction it may rotate in, all are printed on a sticker that is stuck to the saw blade, but it doesn't stick very well. The first time I used the blade a large piece of the sticker ripped off in the middle on either side where it connected to the saw. It isn't a huge deal, but with time the rest of the sticker will likely come off and then I won't have any of the information on it anymore. In my experience this information is usually engraved directly onto the metal so it can't be lost. Again, it isn't a huge deal, but it is a flaw in my opinion.

First take on around 10 cuts is that this blade produces excellent clean cuts. Ripped a sheet of 1/2" plywood into various sized strips and it's very easy to see which edges were cut by this blade and the original edge cuts of the plywood.

I put this in a wen track saw. It’s a great blade, it’s inexpensive, stays sharp, thin kerf and leaves a clean cut. Not much else you can ask for. It’s a great upgrade from the blades that come stock on track saws. Just be careful about bending it in it’s in a traditional circular saw

J'utilise cette lame pour couper de la mélamine.Elle fonctionne très bien, mais j'aurais dû commander une lame avec plus de dents pour avoir une meilleure coupe franche. Mais elle fait amplement le travail quand même.

Overall great experience. Fast delivery and factory-perfect blade. Great for my DIY purposes. Clean cuts on half-inch MDF and trim pieces.

Cuts smoothly through dimensional lumber, plywood and OSB. Very impressed! Cheers!