Techwear Mask Halloween Cosplay Costume Masks Suitable For Any Adult

My son loved it

Cool thing

After laying everything out on a table I was a little surprised at the need to assemble the fins? Using the top screws and adhesive tape, I decided not to as they didn't fit the shape. I tried getting the LED to work first and it seemd to be fine, not even needing to be charged. The fit was a little uncomfortable as i adjusted it but otherwise fine to wear, sadly after trying it on other issues became apparent. One of the front lights was loose, even after tightening it four times during the roughly 2 hours I spent examining the mask it always became loose again. I was unsure how to remove the visor so I started with the obvious 4 clips, the one on the front left (when viewing from in front) was very loose, I realised when I tried to tighten it that the bolt/nut was missing from the screw securing the top part, I couldn't find it in the box, packaging on the table or floor. A similar issue occured on the opposite side with the bottom of the front clasp falling off after I unlocked/unhooked it. I was able to put it back together but it wouldn't lock unless I loosened the screw to the point it almost came off again. I'm sure I could have found a replacement for the missing item either by asking the seller or checking my local shops but the other issues and my lack of DIY skills made it impossible to keep it and the lack of any stock means I can't get a replacement. Despite all this I do like the overall look/design as a whole and will likely buy one of the simpler ones later or maybe closer halloween. UPDATE: As it has gotten closer to Halloween and seeing more stock had come in I decided to try purchasing a second one since i still prefer this ones overall appearance and in some small part due to a lack of stock of my alternative choice. Thankfully most of my previous issues are not present this time, there was only one small issue in the form of a missing nut for one of the screws that helps secure the two fins. I contacted the seller and they were kind enough to send out a few spare screws/nuts. I have decided to look into painting the plastic/silver looking parts on the front of the second mask with a duller metallic paint to make them stand out less, otherwise the second mask seems to be working fine and I have no complaints/issues. *NOTES* Forgot to add this after using it: Visor tends to steam up easily so I recommend something like anti-fog wipes and keeping some on hand, using one about once every hour or when you notice vision gets bad, depends on use/situation. Condensation was also a little bit of an issue when worn for a long period if time (might need cloth/tissues). The longest I wore the mask for was roughly four hours, not including breaks to use anti-fog wipes. All my actions were pretty ordinary/casual (nothing taxing) but at that point I could feel a strain on my neck so I personally wouldn't wear it any longer than that, again this will depend on the person and situation.

Please be aware that you cannot change those colour columns and the app that it uses (called Magic Display), has limited customization. You cannot save designs or make animations (only use pre-set of like 7), you can create one singular design but it has a weird scroll feature to scroll the canvas while youre making it. I personally didnt enjoy it, if you are buying the mask for just the masks feature and dont plan to be making multiple designs and like the different colours (cannot seem to have one consistent colour across the screen) then id say go for it! The helmet/mask is still very cool, just not what I personally had in mind.

Drill holes don't line up or poorly finish, As I'm on a time chrunch I don't have time to return it so I have to strip it down, redo dill holes, replaced 3 stripped screaws. Magic display wouldn't connect and was coved in glue. Not worth this price.

The mask looks and feels nice, a lot of customization available as you can edit what is displayed on the LED's frame. But that is pretty much it. You can talk, nor do too many things with this mask because you will choke on air after 1 min. So yeah, not too shabby for pictures though.

角みたいなのは、自分でくっつけます。 私は不器用なのでちょっと失敗しました。 マスクのネジ内側をそれぞれ外して、角をネジ穴を合わせながら両面テープでくっつけて、後でネジを締めます。 ネジ締めの小さい工具は付属してます。 私のはメガネかけてますが、メガネが当たらない設計になっていて良かったです。 アプリはQRコードでmagic displayをインストールして、Bluetoothで接続すると表示を色々変えられて楽しいです。 あと目のところだけ空いてる布のマスクもついてます。 付属品の中に穴あきバンドみたいなのが2本ついてますが、これだけ何に使うのかよく分かりません。 まあ分からなくても一応使えましたので良しとします。 コスプレ楽しみです。 ありがとうございます！

Casque très amusant d'utilisation cependant si on perd le casque ainsi que les papier du casque impossible de retrouver l'application empêchant l'utilisation complète du casque ce qui est mon cas malheureusement donc quelqu'un pourrait m'aider à retrouver l'appli merci d'avance

Really amazing mask, was really impressed with the construction and materials, especially the LED screen. Fits fairly well and based on the few days I've had it, this is my personal opinion as it goes. Pros: >Mask is well made, easy to breathe, and sturdy, though I wouldn't trust it to take impacts. >Tools and accessories included. >LED screen is phenomenal, included with a pre programmed equalizer that matches to your phone audio and a built-in speaker to the mask, preset LED animations, and LED precise customizability that can be saved to the app. Cons: >The screen seems off center from the mask . >The lights at the jawline are difficult to rescrew back on. >Very few choices on preset animations, though you can create your own with enough practice and time. On a personal note, if you look closely at the images and notice that the sides of the screen are wierd. They're not cracks or damage. The screen is being held by strong clear adhesive strips. Overall, it works really well for anyone who could enjoy it as is, or if you have tools and technical knowledge, you could make these adjustments to make it more perfect, but still a nice buy all around.

Perfetto

Máscara con muchas funcionalidades que puedes hacer desde la aplicación del móvil. Por poner un pero, pondría en los filos de la máscara algún tipo de almohadilla o algo parecido ya que los filos de la máscara se te clavan en la cabeza y es algo molesto, también es verdad que según el tipo de cabeza de cada uno pero no vendría mal unas almohadillas.